Feeder

ARBOR Destacker and feed table

Year of construction: 1990, condition: good (used), Sideloader used Kalmar, unit was well maintained Pgsdpfjh Et E Nox Afheg Rest see pictures

Year of construction: 2011, condition: used, functionality: fully functional, Finger jointing line for cross sections up to 200 cm² (80/240 mm or 100/200 mm), with the following. components: 1. HOWIAL tilt unstacking - SH/4t - 1,75x1,75x6,00m - 4t - short. Length 2,50 m, semi-automatic separation of the package. For tilting the wood pile up to 45°. Electric motor drive. stack dim. max. 1,75 x 1,75 x 6,00 m max. stacking load 4 t shortest wood length 2,5 m 2. HOWIAL - VE 1 lamella separator for crosscut saw. With pneum. controlled tongues, on which the material is marked for defects, deposited on the roller conveyor below. 3. HOWIAL - evaluation roller conveyor RO-1 digital wood moisture measuring, control and recording system for autom. recording and control of wood moisture in cycle measuring method according to electric resistance principle. 4. gann DMT-8 dig. Wood moisture measuring, control and recording system for automatic detection and control of wood moisture in the cycle measuring method according to the electrical resistance principle. Plant in large switchboard complete with ink jet printer. 5. HOWIAL - crosscut saw AS-30 B pneum. Under table crosscut, with 2 autom. feed units, autom. crosscut. Special photocell control for detection of fluorescent line markings. Automatic waste disposal possible. Saw motor power 7,5 kW Pgsdpfx Afji Ezx Doheg saw blade diameter 700 mm feed drive approx. 2 x 1,5 kW Air pressure 8 bar feed speed max. approx. 60 m/min. 6. HOWIAL - conveyor belt cut off waste, with studded belt and guide plates belt width 350 mm belt 2000 mm long belt speed 0,4 m/sec. 7. HOWIAL - double roller conveyor RO-2 6,00 m long incl. transversal transport, drive by round belt, all rollers driven. Cross transport chain conveyor. Ejection ± moisture right Transport speed adjustable 100 m/min. length approx. 6,00 m Width of rollers approx. 400 mm Diameter 112 mm 8. compact finger jointing machine Cook Bolinder The technical data are original from Cook Bolinder: wood width from 75 to 245 mm Timber thickness from 20 to 105 mm Input lengths from 1m to 6 m Cross sections from 30 cm² to 200 cm² Pressing force 5 - 22 to Spindle diameter 50 mm tine profile 15/15 spindle speed approx. 6000 upm Total electrical connected load approx. 62 kW Machine weight approx. 9 to. Gluing OEST comb system for PU Modern Telemechanique SPS control. 9. HOWIAL - Roller conveyor with destacking system Driven roller conveyor with autom. ejector and hydr. driven destacking arms. Technical data: H: 920 mm L: approx. 12.000 mm 10. safety fences incl. circuit breaker 11. finger joint testing machine BSPLT-100 Testing machine for finger joint bending test according to DIN 1052-1/A1 and EN 385 Support distances freely adjustable, attached dimension scale, autom. calculation of support distances in the software. Fully automatic test procedure by mouse click on PC (not included). Alternatively, the test procedure can be started by key operation on the front panel. Connection of any commercially available PC or laptop (Win 2000/XP) via the supplied RS232 serial cable. Fully automatic measured value logging as well as automatic logging in MS-Excel with graphical display. Representation max. wood width: 300 mm max. wood thickness: 140 mm max. compression force: < 100 kN max. support length: 2100 mm Measuring accuracy WITHOUT DISMANTLING

Condition: good (used), functionality: fully functional, Complete Weinig planing line consisting of: Bundle feeding unit, tipping destacker. Cross conveyor with waste rejection function. Transfer to twin bandsaw. Twin bandsaw with diagonal cutting function. Singulation before planing infeed. Through-feed crosscut saw. Infeed to planing machine. Weinig 22 B planer with 8 spindles. Electronic feed drive with frequency inverter up to 80 m/min. In 2023, the planer was fitted with a new frequency-controlled feed system as well as new table and wear plates. Outfeed from planing machine. Almab stacking system with stick magazine for 9 sticks. Additional Almab stacking system. The planing line is fully mechanised. Specifications: Wood length range 2–6.10 m. Thickness 10–120 mm. Width 40–220 mm. Bundle size input: 1.20 × 1.30 m. Output: 1.20 × 1.20 m (W × H). Well-maintained system. Regular service. Pjdpfx Aowvqt Tjfhegg

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker Pedpfjwgbw Rox Afhsgg 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Possible to offer with additional Weinig bundling system if needed.

Condition: repair required (used), functionality: not functional, Dimter HK 400 finger-jointing line Finger-jointing plant for timber packages Wood input lengths: 800-6000 mm Milling height: 285 mm (300 mm) Colour: blue Pjdpfovi Hw Njx Afhegg Needs repair, sold as is in its current condition The plant has already been dismantled and is stored in the warehouse in Achern A lot of material for little money All technical documentation available We will also provide technical support and answer all your questions.

Condition: new, Board stacker BSx2 with pure mechanical stacker arms or pneumatic rotatable. With steel or plastic chain. Infeed sever conveyor, zero set rollers or without them. We have all that options. Specification: 1. Feed (machine) speed: 9 layer/min. 2. Lift capacity: 3 tons. 3. Step rate: 17 m/min. Pjdpfx Asiyztzefhsgg 4. Package size: 1200x1200x5000 mm. 5. Feed conveyor type: steel chain (plastic- optional). 6. Options: infeed belt conveyor. 7. Motor (Lift): 3 kW, 230/400 V, 50 Hz, with brake. 8. Motor (forks): 1,5 kW, 230/400 V, 50 Hz, with brake. 9. Motor (conv.): 1,1 kW, 230/400 V, 50 Hz, with brake. 10. Motor (positioner): 1,1kW, 230/400 V, 50 Hz. 11. Air consumption: 7 L/min (6 bar). For more options or information, feel free to contact us!

Condition: new, Board stacker BSx1 with pure mechanical stacker arms or pneumatic rotatable. With steel or plastic chain. Infeed sever conveyor, zero set rollers or without them. We have all that options. Specification: 1. Feed (machine) speed: 9 layer/min. 2. Lift capacity: 3 tons. Pgsdpfoiyztwex Afhog 3. Step rate: 17 m/min. 4. Package size: 1200x1200x5000 mm. 5. Feed conveyor type: steel chain (plastic- optional). 6. Options: infeed belt conveyor. 7. Motor (Lift): 3 kW, 230/400 V, 50 Hz, with brake. 8. Motor (forks): 1,5 kW, 230/400 V, 50 Hz, with brake. 9. Motor (conv.): 1,1 kW, 230/400 V, 50 Hz, with brake. 10. Motor (positioner): 1,1kW, 230/400 V, 50 Hz. 11. Air consumption: 7 l/min. For more options or information, feel free to contact us!

Condition: good (used), The machine has been overhauled many new parts new cables Pjdpfxov Ihdzj Afhogg new hydraulic station The machine has been checked, is functional, We can send a video.

Condition: excellent (used), High speed moulder infeed comprising a freestanding flat magazine in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 5.5kW hydraulic unit (max 140m/min). Pgodpfxjwgbxzj Afhog A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814.

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 10000241, workpiece height (max.): 160 mm, workpiece width (max.): 310 mm, number of spindles: 4, WEINIG POWERMAT 1500 - SPECIAL MACHINE CONFIGURED FOR MILLING WOODEN DOOR FRAME PANELS Working width 30 - 310mm (with tool flight circle 93-125mm) Working height 10 - 160mm (with tool flight circle 93-163 mm)Description of machine parameters Pgsdpsuygcwsfx Afhjg Number of spindles 4 Spindles bottom 1 Spindles right 1 Spindles left 1 Spindles top 1 Separate motor for each spindle Electronic feed incl. brake, infinitely variable 5-40 m/min. Short infeed table 1.2 m long with 2 driven rollers above the table Hard-coated machine table surface Manual lubricant pump WEINIG Comfort Set Control system WEINIG MEMORY PLUS-SYSTEM CE mark Declaration of Conformity