Clamping plate 5000 x 2000 x 350 mm

Asquith

Condition: used, Asquith 9 ft OD 4 Radial Arm Drill. Nedpfxoymg Rno Aacjku Tee Slotted double sided box table, brake, coolant, light.

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Geometry: Nkjderz Nflepfx Aacou - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Condition: ready for operation (used), Year of construction: 1977, Asquith ODI Mk2 14/54 5MT Radial Arm Drilling Machine Spindle centre to column centre max. 54" Spindle travel 14″ Spindle taper 5 MT Spindle speeds (16) 40-2040rpm, Spindle motor 5.5 HP Spindle emergency brake Power elevation of arm Power locking to arm and head Box Table Coolant 415V Electrics 1977 Nksdpfx Ajyg Skaoacou For sale with Jet Machinery Ltd Jet Machinery Stock No: #79026 Machine Serial Number: P.33677 Cost: £6,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2021, total width: 1,000 mm, total length: 1,200 mm, total height: 3,500 mm, overall weight: 7,000 kg, Angles plate ASQUITH - HT-35/10 MACH-ID 9260 Make: ASQUITH Type: HT-35/10 Year: 2021 Number of T slots: 14 Jump from T to T: 250mm T size: 28mm Number of matching pieces:1 Length: 1200mm Width: 1000mm Nksdpfjxhgg Dox Aacsu Height: 3500mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, New hydraulic high speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Nkodpfx Aof Rt Irsacju

Condition: excellent (used), Year of construction: 2021, total width: 1,500 mm, total length: 1,200 mm, total height: 3,500 mm, overall weight: 7,000 kg, Number of T slots: 14 Jump from T to T: 250mm Njdpfoxhgfmjx Aacoku T size: 28mm Number of matching pieces:2 Length: 1200mm Width: 1500mm Height: 3500mm Weight: 7000kg

Condition: good (used), total length: 3,500 mm, total width: 2,000 mm, plate height: 350 mm, Manufacturer: ASQUITH Type: ST-35 Nkodpfx Aaswp D S Njcou Specifications Metric US Standard Length 3500 mm Width 2000 mm Height 350 mm Number of T-slots 8 T-slot pitch / spacing 285 mm T-slot size 36 mm Number of matching pieces 1 Dimensions (estimated) Length 3500 mm Width 2000 mm Height 250 mm Weight 5250 kg Please note: The information on this page has been compiled by us to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent any representations or contractual conditions. We recommend you verify all important details.

Year of construction: 2009, condition: reconditioned (used), 100t turning roll, rollerbed workpiece diameter 500mm-7.500mm Nksdpfx Aomk Iktjaceu speed 130-1.250mm/min availible for renting

Condition: good (used), total length: 4,700 mm, total width: 1,500 mm, plate height: 355 mm, Manufacturer: ASQUITH Type: SDT Year built: 1990 Specifications Metric US Standard Length: 4700 mm Width: 1500 mm Height: 355 mm Number of T-slots: 6 Distance T-slots / pitch: 250 mm T-slot size: 34 mm Number of matching pieces: 2 Njdswp Erwopfx Aacoku Dimensions (Estimated) Length: 4700 mm Width: 1500 mm Height: 355 mm Weight: 5400 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, you will not find any representation or contractual conditions. We recommend that you check all important details.

Condition: good (used), Year of construction: 1993, total length: 1,400 mm, total width: 795 mm, total height: 920 mm, Manufacturer: ASQUITH Type: TB-1400 Year of manufacture: 1993 3 matching pieces Weight 2300 kg each Taper fabricated construction Specifications Metric US Standard Number of T slots 5 Up and 5 Down Pitch from T to T 260 mm T-slot dimension 28 mm Number of T-slotted sides 2 Dimensions (Estimate) Length 1400 mm Width 795 mm Nkedpfewpvd Rsx Aacju Height 920 mm Weight 2300 kg Please note: The information on this page was obtained by us to the best of our knowledge and, as far as possible, from the manufacturer. The information is provided in good faith, but the accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend you check all important details.

Year of construction: 1990, condition: like new (used), Used Schuler hydraulic press for sale Nodehcnxropfx Aaceku Brand : Schuler Schuler EB 2-500- 2.75-0.85 H-frame hydraulic press Power ( ton ) : 500 tons Table dimensions ( x-y/mm) : 3000×1800 Slide dimensions ( x-y/mm) : 3000×1800 Stroke ( x/mm) : 850 Stroke per minute from 12 to 24 Control Siemens S7 New hydraulic presses for sale

Condition: good (used), total length: 7,500 mm, total width: 2,400 mm, plate height: 300 mm, Manufacturer: ASQUITH Type: DT-75 Year of manufacture: 1990 Specifications Metric US Standard Length 7500 mm Width 2400 mm Height 300 mm Number of T-slots 8 T-slot spacing / Step 300 mm T-slot size 36 mm Number of matching pieces 2 Nedpfxswp Ekys Aacoku Dimensions (Estimated) Length 7500 mm Width 2400 mm Height 300 mm Weight 15840 kg Please note: The information on this page has been provided by us to the best of our knowledge and belief, and where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Condition: good (used), total length: 5,500 mm, total width: 2,290 mm, plate height: 300 mm, Manufacturer: ASQUITH Type: Cast iron Year of construction: 1980 + 6136 = Field 5500 x 4130 mm Specifications Metric US Standard Nkjdewp Hhyspfx Aacsu Length 5500 mm Width 2290 mm Height 300 mm Number of T-slots 8 T-slot distance / spacing 285 mm T -slot size 32 mm Weight per plate approx. 8 kg Dimensions (estimated) Length 5500 mm Width 2290 mm Height 300 mm Weight 0 kg Please note: The information on this page has been provided by us to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, you do not represent any representation or contractual terms. We recommend that you check all important details.

Condition: used, Technical details: spindle diameter: 130 mm drill depth: 1380 mm x-travel: 2500 mm y-travel: 1600 mm Nkodovr S Ulspfx Aaceu z-travel: 380 mm w-axis: 900 Bohrspindelvorschub mm U-axis: 320 Planschiebervorschub mm control: auf Wunsch tool taper: ISO SK50 revolution per minute: Planschieber:4,5-180 U/min rpm - drive spindle: 4,5-900 U/min feed:: x/y: 5-2000 total power requirement: ca. 40 kW weight of the machine ca.: ca.< 35 + AZusatzeinrichtungen t The machine can be offered in 4 different sales options. Please choose! 1. the machine is in mint mechanical condition. As is/is. 2. the machine as is/is incl. plate field 4000x2000x300mm = stock no. 1101081 3. the machine is newly wired, with new electrical cabinet, digital display, with 4-axis, AC drives from Siemens, axis motors from Siemens (50A/31Nm) with 12 months warranty on all new parts. 4. further additional equipment can be offered as an option. Such as coolant system, chip conveyor, enclosure etc. We should discuss this on the table with your technical staff. i.D. *

Condition: good (used), Asquith radial drilling machine offered. Type: ODI X-travel: 910 mm Z-travel: 640 mm Stroke spindle: 350 mm Nkodpfsh U Iaxox Aacju Diameter spindle: 65 mm Speed max: 1550 RPM Table: 510 x 1000 mm Bed: 1280 x 795 mm Dimensions: 240x125x293 cm LxWxH For more information call us or send an e-mail.