1-Cylinder Roller coating machine

BÜRKLE SLC1300

Condition: good (used), Working height: 870 mm Working width: 1300 mm Workpiece thickness / pass-through height: 3-120 mm Minimum workpiece length: 350 mm 1 rubber-coated applicator roller: 238 mm diameter, rubber coating 5 By 1 Peripheral speed: 6-30 m/min 1 chrome-plated dosing roller: 174 mm diameter Peripheral speed: 1-7 m/min 1 rubber-coated counter roller: 186 mm diameter Feed rate: 6-30 m/min Electrical equipment: Operating voltage 400 V, 50 Hz Total connected load: 2 kW Motors and switching devices in explosion-proof design on the machine. Non-ex explosion protection control in a separate switch cabinet for installation outside the hazardous area of the machine. Additional features: Motorized height adjustment via pushbutton on control panel Reversing switch for dosing roller Cleaning circuit for dosing roller Operator side: left Machine length: 800 mm Ksdpfjyah Tqjx Addell Maximum machine width (without control cabinet): 2870 mm Weight: 1450 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, feed length X-axis: 4,300 mm, feed length Y-axis: 4,300 mm, cutting length (max.): 4,300 mm, cutting height with scoring (max.): 4,300 mm, saw blade diameter: 380 mm, HPP 380/43/43, fully automatec loading with TBP 200/31/22/ Main motor 18.5 kW Machine works perffectly, possible test run Holzma Profi HPP 380 Cutting length: 4,300 mm Cutting width (program-controlled pusher travel): 4,250 mm Air cushion table: 2,160 x 650 mm, 3 pcs. + 1* 2,810 mm length Central blower: 1 unit with increased blower performance 2 additional alignment devices Technical Data: Saw blade projection: 95 mm Saw carriage feed: forwards 1–130 m/min, backwards constant 130 m/min Main saw motor: 18 kW Kodpfx Asxvz T Ioddell Scoring saw motor: 2.2 kW, VVSH aggregate, program-controlled, vertically rising Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection rating for main saw motor 18 kW: 24 kW Power Control CADmatic 4.0 control with 17-inch flat display Labeling with part graphics / label program / label printer PICA 104

Condition: ready for operation (used), Year of construction: 2003, Brand: Burkle Model: SLC Machine no: 10362-02 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity Klsdpfx Adev Hw Hcjdel - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002442BXM

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 10362, Brand: Burkle Model: SLC Machine no: 10362-01 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Kodpev Hn N Uofx Addoll Stock no: 2002443BXM

Condition: used, Coating system Hymmen CombiCoater ELX-S 1400 with UV dryer. * Technical data will follow shortly Kodpfxolf H Tcj Addell * For self-dismantling and collection.

Year of construction: 1972, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator, power generating unit -Manufacturer: PILLER/MWM -Power: 730 kVA 50 Hz -Engine: MWM type TbRHS 518V16, power 850 hp, speed 1500 rpm -Generator: PILLER NKTB 4-1158 -Note: without controls -Individual components: see photos -Transport dimensions: 6 loading meters Kodpfx Aeivql Ioddoll -Total weight: 8600 kg

Condition: new, Year of construction: 2025, Working width 300 mm Working length 1100 mm Brush diameter 190 mm Brush rotation speed 1500 rpm Spindle diameter 40 mm Number of brushes 2 pcs.(metal + plastic) Max. speed of the feeding belt + smooth adjustment 0 - 10 m / min. Ksdogykauopfx Addoll Working height 940 mm + 50 mm Max. material height 300 mm The diameter of the extraction port 2 x 120 mm Overall dimensions Length 1240 mm Height min / max 1350/1650 mm Width 950 mm Weight 435 kg Total power 4.65 kW Voltage 400V Massive casing, as a result, ensures high stability Working height 940 mm + 50 mm and max. 300 mm material height gives you the freedom to process large materials Two independent brushes (steel, plaster) with powerful motors, with precise manual adjustment allow you to achieve high product quality Two independent extractors ensure smoothness of the removed sawdust and dirt The machine is made of high-class materials, which guarantees reliability high-quality workpieces Stepless speed control of the conveyor carpet allows you to achieve smoothness and intended productivity Optimat's many years of production experience allows us to meet the highest standards machine tool for every budget

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: XP500-1850x864, total height: 7,800 mm, total width: 2,180 mm, total length: 3,074 mm, load capacity per storage section: 520 kg, construction height: 7,800 mm, construction width: 2,180 mm, type of input current: three-phase, input voltage: 230 V, table height: 800 mm, warranty duration: 6 months, input frequency: 50 Hz, DGUV certified until: 12/2025, Equipment: documentation/manual, safety light barrier, Offered here are 4 identical Kardex Shuttle XP500 machines, year of manufacture 2010. The machines have been serviced and inspected annually by the manufacturer, and repaired as needed. The machines are in very good condition and will be dismantled by professionals, reassembled, inspected, and commissioned at your desired location. We are happy to answer any further questions. Kedpfxsxuwazj Addoll Each unit comes with 40 trays; additional trays can be supplied if required.

Condition: good (used), ORMA LCC44/14 CONTINUOUS PRESS LINE WITH PREPARATION BELT AND OUTPUT BELT OSAMA TYPE S4R/P-1400 GLUING MACHINE, 4 ROLLERS Kodpfevtx Hkex Addsll

Condition: excellent (used), Year of construction: 2010, operating hours: 122,471 h, functionality: fully functional, power: 1,095 kW (1,488.78 HP), fuel: domestic gas L, rotational speed (min.): 1,500 rpm, type of input current: three-phase, Jenbacher J320 GS Gas Generator – 1095 kW Main specifications: Engine model: Jenbacher J320 GS Rated power: 1095 kW (ISO 3046) Speed: 1500 rpm Engine weight: 5200 kg Year of manufacture: 2010 Running hours & performance: Total operating hours: 122,471 h Active energy produced: 11,781 MWh Reactive energy: 7,327.8 Mvarh Alternator: Manufacturer: Stamford (AC Generators) Bearing types: 6319 C3 / 6228 C3 Grease type: Kluber Asonic GHY72 Re-lubrication interval: every 4000–4500 hours Heat exchanger: Manufacturer: Tranter International AB Model: GXD-042 Year of manufacture: 2010 Max. operating pressure: up to 30 bar Max. operating temperature: up to 75 °C Connection material: steel Klsdpfjxb D Hbjx Addsl Condition: Equipped with Jenbacher DIA.NE control and monitoring system Fully serviced in line with OEM schedules by an official service centre Excellent working condition 📍 Location: England