Bandsaw - Horizontal

BEKA-MAK BMS 230 DG

Condition: new, Electrical voltage 400 V Frequency 50 Hz Hodpsd R Uz Tofx Addjfb N° Phases 3 / 3 Ph Mass 486 Kg Dimensions sheet 2700 x 27 x 0.9

Condition: new, Year of construction: 2025, The drilling and milling machine can be used for drilling, reaming and expanding holes up to 45/40 mm in cast iron and threading screws up to M12 mm, milling up to 80 mm wide, and notching up to 22 mm. It is also suitable for cutting and face milling. The machine is available from stock. Machine characteristics The machine can be used for drilling, reaming and expanding holes up to 45/40 mm in cast iron and threading screws up to M12 mm, milling up to 80 mm wide, and notching up to 22 mm. It is also suitable for cutting and face milling. Various accessories can be fitted to it. HEAVY, STABLE CAST IRON THE HEIGHT OF THE ROUTER IS ADJUSTABLE ON THE SLIDE AND NOT ON THE COLUMN SOLID CROSS TABLE FOR THE MILLING/DRILLING MACHINE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES, QUIET RUNNING THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION OPTIONAL HEAD +/- 90 degrees ADJUSTABLE HEAD HEIGHT Machine base available as an optional extra - 200€ Technical data MAXIMUM DRILLING SIZE 45 mm MAXIMUM FACE DRILLING 80 mm MAXIMUM FACE MILLING 28 mm Hodpfx Asud H Huoddjfb MAXIMUM THREADING 12 mm SPINDLE PASSAGE 120 mm SPINDLE TAPER MT4 SPINDLE SPEED (6 MOTOR SPEEDS 1400r/min ) 95,170,280,540,960,1600min-1 MAX. DISTANCE FROM SPINDLE TIP TO TABLE 475 mm DISTANCE FROM SPINDLE TO COLUMN SURFACE 260 mm WORKING TABLE DIMENSIONS 820 x 240 mm TABLE TRAVEL 550 x 170 mm MOTOR 1,1kW / 1,5hp Voltage (two options to choose from) 400V (three-phase motor) PACKING DIMENSIONS 1140 x 800 x 1040 mm NET WEIGHT 270 kg Available accessories MK4/B18 drill chuck shank handy tools Drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2 instruction manual in Polish

Condition: used, Year of construction: 1998, capacity 90 degrees: round 250 mm Hfsdpfou Sbpvex Addeb capacity 90 degrees: square 240 mm saw band length 2965 x 27 x 0,9 mm table height mm band speed 37 / 76 m/min total power requirement 1,0 kW weight of the machine ca. 0,38 t dimensions of the machine ca. 1,0 x 1,6 x 1,4 m double miter band saw

Condition: new, Cutting area round 0°: 127 mm Cutting area flat 0°: 125 x 130 mm Cutting area round 45° right: 90 mm Cutting area square 45° right: 90 x 90 mm Cutting area round 60° right: 45 mm Cutting area square 60° right: 45 x 45 mm Vice opening: 130 mm Saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speed: 60 m / min Motor power: 0.55 kW Voltage: 230 V Weight approx.: 25 kg Features: - Saw arm can be tilted up to 60 - Ideal for cutting pipes, profile material and solid material made of VA, iron, etc. - Stable saw arm for low-vibration work - Low-noise due to stable design - Micro limit switch switches off at the end of the cut - Quick-clamping vice for quick and easy workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - Environmentally friendly, as there is no need to use lubricants and coolants - Ideal for use on construction sites due to its low weight - Underframe optionally available (not included in the scope of delivery) Hfedpfx Aoilk Eksddob Equipment: - Saw blade 1440 x 13 x 0.65 mm - Material stop - Ergonomic handle Underframe available at an extra charge: 149 Euro net

Condition: like new (used), pressing force: 70 t, – Capacity 1600 x 70 tons – NC control (touchscreen) – 2 hydraulic cylinders – Foot control Hfsdpfx Ajr Rtb Ujddeb – Photoelectric safety guard – Emergency stop – Relief – Documentation – 400V

Condition: new, Year of construction: 2025, A strong, big band saw for metals with a swivel arm, enabling cutting in the plane perpendicular to the axis of the cut material and at any angle from -45° (left) to + 60° (right). Band saws are perfect for cutting tubes, profiles and other materials. Hsdpfx Adei D Ddijdsfb Product features Material cut can be fed manually or by any feeding device, with automatic tool feed. Appropriate cutting speed (band speed) is obtained through a change on a control panel. Rigid construction arm is made of profiled cast iron. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear carbide guides. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a -45° to + 60° swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band size - 2720×27×0.9 mm Band tension - mechanical (manual) Band speed - 36, 72 m/min Arm lowering control - stepless – hydraulic cylinder Vice base height - 765 mm Minimum material length in vice - 100 mm Power supply - 3-phase, 400 V Total power - S1 100%: 1.5; S6 40%: 2.1 Cooling pump motor power - 0.025 kW Weight - 370 kg Warranty - 12 months User manual - yes CE declaration - yes Angle 0° --- ø250 310×210 240×240 45° R ø200 200×140 180×180 45° L ø165 185×145 160×160 60° R ø120 120×95 100×100 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: good (used), Tap Hfjdpfx Adjdx Uzaodob 1 3/8 GG 115 mm long

Condition: new, NEBES TM 210 BELT SAW - Single-phase 230V Cast iron structure Adjustable cutting angle from 0° to 60° All cast-iron frame with large rapid vice and handwheel for clamping the workpiece Electric pump for blade lubrication and cooling Blade tensioning system with disc springs and oil-bath blade tensioning gauge to ensure constant tensioning Two cutting speeds and induction motor 0.03 mm accuracy on h 100 of cutting Cutting Capacity : 0° 45° 60° Ø 185 mm Ø 120 mm Ø 60 mm 180×180 mm 100×100 mm 60×60 mm Hedpfx Asi Ezq Djddsfb 200×140 mm 100×100 mm 60×60 mm Weight : Kg 179

Condition: new, Year of construction: 2025, Machine for machining various internal and external surfaces, mainly keyways. Widely used in repair shops and tool shops, in single and small batch production. Machine for machining various internal and external surfaces, designed for precise work, especially grooves. It is widely used in overhaul shops and tool shops, both in unit and small batch production, making it a versatile tool for various industries. Main features of the machine: Hardened and ground guides: ensure maximum durability and precision, guaranteeing longevity and high quality machining. Tilting chisel head of +/- 30°: Allows flexibility in machining surfaces at different angles, increasing the versatility of the machine. Built-in lubrication system: Automatic lubrication of the workpieces, which reduces friction, increases machine life and minimises the need for manual maintenance. Adjustable stroke speed per minute - 6 settings: Allows the speed to be adjusted to suit the specific material and type of machining being carried out, improving accuracy and efficiency. This machine is ideal for both small batch production shops and those that need high precision when overhauling or reconditioning tools. Thanks to modern features such as the ability to adjust the speed, users can easily adapt the operation of the machine to their individual needs, increasing efficiency and saving time. Technical specifications Maximum stroke 125 mm Minimum number of strokes 60 / min. Maximum number of strokes 350 / min. Number of speed steps 6 Head rotation 90º Table dimension 500x200 mm Table travel X/Y 220 mm Hfjdpfx Adouyhxmjdob Z axis travel 200 mm Motor power 0.37 kW Overall dimensions 800 x 750 x 1550 mm Weight 290 kg Knife shank dimensions Ø 10 / Ø 16 mm or 16 mm square shank

Condition: good (used), Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 4 pieces Hsdpfx Adjri Un Rsdofb -Tool angle: 40° -Dimensions/lengths: see drawing in the photos -Transport dimensions: 1000/130/H70 mm -Total weight: 32.1 kg