Band saw

BEKA-MAK BMSO 320 GLH

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Machinetype: multiple wire drawing machine - dry Info: straight through Make: VEB Type: 8 Block Constr. year: inlet wire diameter: 2,5 mm finished wire diamter: 0,8 mm number of drafts: 8 diameter of capstan: 400 mm speed -meters/sek: 15 m Fpodpowi Tidjfx Adcjh Location: Europe

Condition: ready for operation (used), Year of construction: 2024, overall weight: 41 kg, controller manufacturer: FANUC, number of axes: 6, This 6-axis FANUC CRX-20iA/L robot arm was manufactured in 2024. It features a maximum load capacity of 20 kg and a reach of 1418 mm. The robot's joints have extensive motion ranges, enhancing its flexibility for complex tasks. If you are looking to get high-quality automation capabilities, consider the FANUC CRX-20iA/L machine we have for sale. Contact us for more information. • The Robot is new and unused. Only unpacked. • Max. load capacity at wrist: 20 kg • Max. reach (end-of-flange): 1418 mm Fodpfx Asx D Ezledcoph • Controlled axes: 6 • Repeatability: ±0.04 mm • Mechanical weight: 41 kg • Joint motion range: • J1: 360° • J2: 360° • J3: 540° • J4: 380° • J5: 360° • J6: 450°

Condition: good (used), Pressure 110 Ton Edge length 3100 mm Fpjdpfxow Hx Rzs Adceh Year of construction 1990+ retrofit Stand width 2600 mm Steered axles Y1,Y2,X axis Control Esa S630 control Including Wila Sealing stamp

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: GLT135SHE -2200333157, cooling capacity: 354 kW (481.31 HP), type of input current: three-phase, type of cooling: water, overall weight: 4,428 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 60.7 m³/h, pump pressure: 2.51 bar, total width: 2,190 mm, total length: 4,530 mm, total height: 2,425 mm, warranty duration: 3 months, Equipment: type plate available, Process Chiller / Air-cooled Chiller, Type: Galaxy GLT 135 SHE Manufacturer: MTA S.p.A. The Galaxy GLT 135 SHE units are compact air-cooled chillers designed for outdoor installation (operational from -20°C to +43°C). Features include a plate evaporator, scroll compressors, control and switch cabinet, compressor shut-off valves, equipment suitable for low ambient temperatures down to -20°C (EC fans), P2 pump, 510-liter buffer tank, electric frost protection heater, condenser filter mats including Victaulic couplings. Cooling capacity (kW): 354 Chilled water temperature out/in (°C): 7 / 12 Flow rate (m³/h): 60.7 Available pump pressure (bar): 2.51 Ambient temperature (°C): 32 Refrigeration circuit: Refrigerant: R 410A Number of refrigeration circuits: 2 Number of compressors: 6 Capacity steps (%): 0-17-33-50-67-83-100 Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power input (kW): 167.7 Max. current (A): 273.3 Starting current per circuit (A): 421.8 Protection class: IP54 Dimensions: Length (mm): 4530, Width (mm): 2190, Height (mm): 2425 Fpedpfxjxqnyde Adcjh Weight (kg): 4428 Connection: Victaulic DN 125 Serial number: 2200333157 Year of manufacture: 2018 Condition: Cosmetically: 2, Technically: OK & tested Used Price: on request in EUR (plus VAT, ex works Nettetal) – 3 months warranty MTA offers, upon request, a functional test of the chiller together with the buyer prior to collection at the Nettetal branch. Used machines may have visual imperfections due to previous use. (Subject to technical changes and prior sale!)

Condition: used, turning diameter over bed 460 mm turning dia. over face-slide 256 mm turning length 1250 mm centre distance 1250 mm centre height 230 mm spindle bore 55 mm spindle turning speed range 35 - 1800 U/min weight of the machine ca. 2,7 t Fpsdpfxsxwp Ebj Adceh dimensions of machine L x W x H 2,75 x 1,20 x 1,42 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head with 3 inserts, solid steady

Condition: used, TECHNICAL DETAILS - Spindle speeds : 5 - 300 [rpm] - C axis indexing precision : 0.001 [°] - Vertical travel of the main spindle : 130 [mm] - Vertical travel of the main spindle (manual mode) : 140 [mm] - Rotational speed of the grinding spindle with motor : 4500 - 80.000 [rpm] - Rotational speed of the grinding spindle with turbine : 100.000 - 160.000 [rpm] - Cylindrical grinding without/with intermediate plate max. : 230 / 360 [mm] - Maximum grinding length Z (with block) : 125 [mm] - Maximum acute angle in conical grinding : 16 [°] - Maximum grinding depth in conical grinding with angle : 44 [mm] LINEAR AXES - Travels on X/Y/Z axes : 700 / 500 / 500 [mm] - Rapid traverses rates (X/Y) : 4000 [mm/min] - Cutting feed rates (X/Y) : 0 - 2000 [mm/min] TABLE - Table dimensions : 770 x 630 [mm] - Maximum weight upon table : 500 [kg] - Distance table / spindle nose (min./max.) : 0 - 600 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2650 x 2577 [mm] - Machine height : 2677 [mm] - Machine weight : 5600 [kg] MACHINE HOURS - Number of working hours : 44995 [h] EQUIPMENT - CNC : Fanuc - Coolant tank * with high-pressure pump Fpsdpfxex Av Ade Adcoh * with paper filtering unit - Oil mist extractor - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: ELB0109, cooling capacity: 720 kW (978.93 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,500 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -10 °C, input voltage: 400 V, pressure: 15 bar, volume flow: 65 m³/h, total width: 406,000 mm, total length: 225,000 mm, total height: 247,000 mm, noise level: 72 dB, input frequency: 50 Hz, Trane Air-Cooled Chiller GVUF205 X XLN – 2018 Manufacturer: Trane (France) Model: GVAF 205 X XLN Year of Manufacture: 2018 Serial Number: ELB0109 Type of Cooling: Air-cooled (screw chiller) Cooling Capacity: ~720 kW, 620kcal/h Refrigerant: R134a (2 independent circuits – 75/70 kg, GWP 1430) Power Supply: 400 V / 50 Hz / 3-phase Maximum Current (A max): 506 A Starting Current: 596 A Short-Circuit Protection (ICC-LRA): 35 kA Design Pressure: Refrigerant circuit: LP 15 bar / HP 18.8 bar Fsdpfx Aew R Ualsdcsph Water side: 10 bar Operating Conditions: Ambient Temperature Range: –10 °C … +46 °C (optional Low Ambient Kit: up to –25 °C) Water Flow Rate: ~65 – 108 m³/h Evaporator water content: ~120 L Dimensions & Weight: Overall Weight: 4 414 kg Dimensions (L × W × H): 4 060 × 2 250 × 2 470 mm Key Features: High-efficiency air-cooled screw chiller. Two independent refrigerant circuits ensure reliability. Uses R134a refrigerant, environmentally compliant. Extra-Low-Noise (XLN) version – optimized for reduced sound emissions. Suitable for industrial and commercial cooling applications. Condition: ✔️ Good working condition ✔️ Regularly maintained ✔️ Immediately available

Year of construction: 2005, condition: ready for operation (used), Travel X/Y/Z: 2500mm/900mm/800mm, speed: 18000rpm, spindle power: 35kW, max. table load: 3000kg, tool places: 30, machine dimensions X/Y/Z: approx. 6500mm/3000mm/3000mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D, operating hours: 55730h, spindle hours: 18696h. Z-axis brake defective, roller shutter in machine room defective, screen cable defective. Including cooling lubrication system Knoll VRF 250/1250, documentation available. On-site inspection is possible. Fodevamqdepfx Adceph

Condition: good (used), Year of construction: 2006, CNC Multitron PS 10 Control: Column-guided Material roller conveyor on both sides 4000 mm / 1000 mm Cutting speed 15 - 105 m / min Technical details Cutting diameter 320 mm Saw blade length 3280 mm Fodev I Rfujpfx Adcsph Cutting width 320 mm Total power requirement 3.8 kW Machine weight approx. 115

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Fpjdpfxot Ac Efo Adceh Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition