Automatic circular saw

BEWO

Condition: used, disk of circular saw-Ø: bis 250 mm cutting area at 90° round: ca. 7 5 mm cutting length: 500 mm electrical connection: 380 V sawing drive: 0,75/1,1 kW Kdjdpsbbbhnsfx Addjg space needed: 1700/2100 x 900 x 1440 mm weight: 355 kg

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Kdedpfx Aec Tmygeddeg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0811759, • Cutting diameter (round tubes): 8 to 90 mm • Square tube profile capacity: 10 × 10 mm to 80 × 80 mm • Cut speed / feed speed: 50 to 300 m/min • Saw blade diameter: approx. 350 mm • Motor power (saw drive): approx. 5.5 kW • Clamping system: BEWO Prisma jaw system (four-point clamping, allows simultaneous clamping of multiple tubes) • Controller / automation: Siemens CNC / centralized Siemens controller; fully automatic setting adjustments based on entered tube parameters. Kdodpfx Adjxcwc Sjdsg • Deburring: Often integrated (the machine is used together with a deburring unit/system) • Throughput: up to 8,000 pieces per hour in some configurations.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0612072, saw blade diameter: 350 mm, cutting height (max.): 90 mm, controller manufacturer: Siemens, controller model: Simatic Multi Panel, BEWO prism clamping system for simultaneous sawing of multiple tubes Kdodpfjv Nagdjx Addeg TECHNICAL DETAILS Control: Siemens Simatic Multi Panel Cutting capacity Round tubes: 8 - 90 mm Square tubes: 10 x 10 mm - 80 x 80 mm Maximum capacity: 8,000 tubes per hour Saw motor Power: 5.5 kW Cutting speed: 50 - 300 m/min EQUIPMENT - Integrated deburring machine for seamless processing - BEWO prism clamping system for simultaneous sawing of multiple tubes

Year of construction: 2016, condition: excellent (used), 1 used short bar loader make Breuning type ILS RBL 80/12 Year 2016 clamping range 5-80 mm diameter Length 100-1200 mm Kdsdpfjht Rl Esx Addog

Condition: like new (used), Year of construction: 2002, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 0213101, saw blade diameter: 350 mm, cutting height (max.): 90 mm, input voltage: 380 V, working range: 4,000 mm, A used high class refurbished 2002 BEWO Automatic Circular Sawing including BEWO deburring machine DB-90. Machine Model FCH-90-M serial number 0213101 Including: BUNDLE LOADER: • Max. bundle diameter 650 mm, max lifting capacity 4000 kgs equally divided over 5 lifting units (max starting length 7500 mm). • The bundle loader has 5 new lifting belts. • The bundle loader is equipped with new sensors. CUTTING UNIT: • Heavy duty, high speed roller drive tube transport system, including new transport rollers. • Transport system is provided with new tooth belts. • Automatic setting of saw blade stroke. • Cutting speed sawblade chosen by customer (RPM) + new blade motor drive tooth belt. • 3 KW cutting head motor + frequency converter. • 1 saw blade, spindle 40 mm + clamping flange. • Micro lube blade coolant system c/w spray mist blade cooler. • Hydraulic material clamping system. • Tube discharge system, Max cut length capacity = 4000 mm. • 2 man length stops with new DRO + hydraulic clamping. • Siemens Simatic Panel operator HMI display and Siemens S7-300 PLC. NOTE: Control in METRIC. • 1 set of jaws included with machine. • Electrics built to European standard 400V 50Hz • Feed trough motor + new encoder + frequency converter. New plexiglass windows + new gas springs. • New steel plate for ejection table top including new table nose. • Transport system and material stops are equipped with new sensors. • New tooth belts for encoders. • New chip brush for saw blade. • New hold down finger system. • New hydraulic filters. • FAT at our workshop with material supplied by the end user. • De commissioning • Packing and loading/securing into customers container/truck. Delivery FCA. • No transport and installation but can be quoted additionally and be done by our experienced team. Kdedpfjv Sycqox Addog

Year of construction: 2004, condition: good (used), A used good condition double miter cold circular saw machine from KASTO Model: "KASTOdisc A10". - Fully automatic operation - Single cut - Hydrasulic saw bars - Central lubrication for saw guides - Coolant device - documentation Saw blade diameter 350mm Cutting range round 90°/ 45° 100/ 100mm square 90/ 45° 100x100/ 100x100mm Rectangle 90°/ 45° 170x100/ 130x100 Shortest remaining piece length with single cut at 90° 30mm Shortest remaining piece length in automatic mode at 90° 260mm Working height 950mm Dimensions WxDxH 1530x1348x1890 mm Kdsdjkfvhkjpfx Addjg Weight 980kg Further tech. Data see pdf. document Tech. Data and dimensions: Errors excepted

Condition: new, Center length ----- 1000 mm Center height ----- 230 mm Kedpfega Tz Uox Addedg Turning diameter ----- 460 mm Main spindle passage ----- 80 mm Bed width ----- 336 mm Spindle speed ----- 25-1800 rpm Motor ----- 5.5 KW HEAVY DUTY VERSION - WEIGHT 2400 KG INCLUDED * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOB2 with 4 tines * 3 Chuck 250 mm * 4 Chuck 320 mm * 350 mm clamping plate * Fixed and moving glasses * LED working light and cooling system * Electric brake CE * Box with various tools

Condition: new, ROGI surface grinder type FSG-2050M Kdjdpfsga T H Sex Addjg Table size ----- 200 x 508 mm Longitudinal displacement of work table ----- 530 mm Cross displacement of worktable ----- 220 mm Unloading ----- 450 mm Max. permissible workpiece weight ----- 180 kg Grinding stone ----- 220 × 20 × 31.75 mm Motor ----- 2.2 KW Weight ----- 1600 kg Dimension machine ----- 2300 x 2150 mm

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. Kedofgyigspfx Addodg The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.