BIESSE drilling gfrup 3 Spindles int.

BIESSE

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, number of axes: 4, table length: 4,300 mm, table width: 2,200 mm, number of spindles: 40, tool diameter: 120 mm, TECHNICAL DETAILS Number of spindles for vertical drilling: 30 Number of spindles for horizontal drilling in X-direction: 6 Number of spindles for horizontal drilling in Y-direction: 4 Total number of vertical + horizontal spindles: 40 Number of controlled axes: 4 Maximum tool diameter: 120 mm Table dimensions: 4,300 x 2,200 mm Number of stations in tool magazine 1: 22 Number of stations in tool magazine 2: 8 MACHINE DETAILS Milling motor power: 12 kW Total installed power: 42 kW Control software: BIESSEWORKS EQUIPMENT • Automatic panel loading system • Automatic panel stacking system • Lift table Hfodpeyq Ez Tofx Abved • Conveyor system • Vacuum pump Note: The safety fences at the rear and on the loading table are missing and will only be supplied subject to availability. The machine is sold and delivered as-is, in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial descriptive materials. The buyer has the right to inspect the machine prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7087

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, workpiece height (max.): 90 mm, workpiece width (max.): 3,200 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units on the left side: 5 Milling unit (AS10) Double finishing cutter, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (rough) Fine trimming for chamfering and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 90 mm Maximum panel length: 3,200 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm FEATURES Feed chain with carriers Pressure applied via rubber belt Panel guide rails with NC positioning Hjdpfxeyq Avho Abvefd Edge roll magazine with 6 positions Hot melt adhesive system for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on upper cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7685

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, travel distance X-axis: 6,200 mm, travel distance Y-axis: 1,935 mm, workpiece height (max.): 250 mm, number of axes: 4, number of spindles: 40, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of vertical drilling spindles: 28 Number of horizontal drilling spindles in X-direction: 4 Number of horizontal drilling spindles in Y-direction: 8 Total number of drilling spindles: 40 Total number of tool change positions: 22 Number of suction traverses: 10 Milling unit Number of axes: 4 Motor power: 10.5 kW Automatic tool changer Edge banding unit Gluing unit Tool magazine Grooving unit Number of positions in tool magazine: 22 MACHINE DETAILS Main spindle power: 10.5 kW Total power: 31 kW EQUIPMENT Vacuum pump Safety net Chip conveyor Hodpsyqzrnsfx Abvofd The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods before collection and shall be responsible for the installation, securing, and use of the machine at the place of destination. External reference: 8011

Condition: good (used), Code: 0278 Hedpjyuvb Esfx Abvefd Brand: COMIL BIESSE Model: COSMO Self-adjusting clamp press for furniture, furnishings, kitchens, bathroom furniture and various Working length max mm 2500 Working height mm 1200 Working width mm 700 Positioning speed 3,5 mt/min Total power Kw 3,7 Overall dimensions: mm 3760 x 920 x 2280 h Weight kg 2200

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 4,140 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 275 mm, number of axes: 5, This 5-axis BIESSE Rover A 1242 was manufactured in 2021. It features a working range of 4140 mm in the X-axis, 1270 mm in the Y-axis, and 275 mm in the Z-axis. The machine is equipped with brushless motors and a PC-based control system for enhanced performance. If you are looking to get high-quality CNC wood machining capabilities, consider the BIESSE Rover A 1242 machine we have for sale. Contact us for further details. • Working range • Y (5-axis): 1270 mm • Y (4-axis): 1260 mm • Z (with H=74 mm vacuum modules): 230 mm • Z (with H=29 mm vacuum modules): 275 mm Hsdpjyt Rrvjfx Abvofd • Axes and drives • X & Y: Rack and pinion drive; accuracy class 6 • Z: Ball screw with preloaded nut; accuracy class ISO C7 • Motors: Brushless motors with digital drives via Mechatrolink system • Control system and PC hardware • Control: BH660 (PC-based) with WRT (Windows Real Time) technology • CPU: Intel Core i5 or higher • RAM: 16 GB • Storage: 256 GB SSD or higher • Monitor: 21.5-inch LCD color screen • Operating system: Windows with real-time process management extension • Connectivity: Ethernet card; USB ports • Electrical and pneumatic • Power supply: 380 / 400 / 415 V – 50/60 Hz • Control voltage: 24 V DC (stabilized power supply) • Cabinet cooling: Air conditioning system for operation up to 40°C (104°F) • UPS (uninterruptible power supply): 7–10 minutes runtime for data protection • Workpiece support (ATS system) • Workpiece supports: 8 ATS aluminum supports on linear guides • Module carriers: 24 carriers (132 × 132 × H41.5 mm) with pneumatic clamping • Set-Up Assistant (SA): Manual positioning with LED indicators; ±1.5 mm precision • Vacuum zones: 2 independent work areas in X; 2 independent clamping areas in X • Software and licensing • Primary software: NC-HOPS 7 MacroCAM • Safety and maintenance • Safety system: Bumper system (front and rear) for immediate stop upon collision • Protection: Polycarbonate transparent front plate and sound-absorbing cover • Lubrication: Automatic lubrication system for linear guides and rack/pinion Additional equipment • Vacuum pumps (supported/optional): Up to two units, 90/100 m³/h or 250 m³/h each

Condition: ready for operation (used), Year of construction: 2020, overall weight: 3,800 kg, This 3-axis BIESSE Selco WN 2 was manufactured in 2020. It features a robust machine weight of 3900 kg and operates on a power supply of 400 VAC with a consumption of 12 kW. The machine is designed for efficient panel cutting and includes a CE marking for compliance. If you are looking to get high-quality panel saw capabilities, consider the BIESSE Selco WN 2 machine we have for sale. Contact us for further details. • Electrical cabinet weight: 190 kg • Power supply voltage: 400 VAC • Full load current: 24 A • Number of power supply phases: 3 • Power consumption: 12 kW • Frequency: 50 Hz • Short circuit rating: 10 kA RMS • Compressed air supply: 6.5–7 bar Hfsdpfx Asyt Rkljbvjd • Required suction flow speed: 30 m/sec • CE marking: Yes

Condition: used, functionality: unexamined, Ferwood Code: AGG0062 – Manufacturer Code: 6314A0111 – Condition: Used – Functionality: Not tested – Compatible Machine: CNC BIESSE ROVER 23/24/27/30/346 – If interested, we offer an overhaul service, please contact us. Weight and dimensions for transport: 2.5 kg, 20x20x20 cm Hodovu Auujpfx Abvofd

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,300 mm, number of spindles: 21, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 1,300 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 60 m/min Travel speed Z-axis: 25 m/min Number of suction traverses: 6 Spindles Number of spindles for vertical drilling: 15 Number of spindles for horizontal drilling in X-direction: 4 Number of spindles for horizontal drilling in Y-direction: 2 Total number of spindles: 21 Milling unit Number of axes: 3 Max. spindle speed: 24,000 rpm Motor power: 9 kW Tool changer Hfsdpfx Absytr Rysvod Number of tool positions: 10 MACHINE DETAILS Total power: 26 kW EQUIPMENT Vacuum pump WINDOWS control system WRT machine programming software Note: Cones and milling cutters are not included in the scope of delivery. Safety fences will be supplied subject to availability (right side missing). The machine is sold and delivered in its actual and legal condition ("as seen and agreed") based on photo documentation and technical/commercial documents for descriptive purposes. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8174

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, CNC machining center X working area: 3855 mm Y working area: 1650 mm Z working area: 245 mm 5-axis electrospindle, 13 kW power, HSK63F interface, liquid-cooled 12-position turret tool changer mounted on carriage Hfodoyuuw Eepfx Abvod 16-position tool changer mounted on X carriage Vertical drilling heads: 20 Horizontal drilling heads X: 4 Horizontal drilling heads Y: 4 Saw blade unit for grooving 8-rail worktable Software: bSolid Heat exchanger for coolant 250 m3/h vacuum pump Safety photocells Chip conveyor Only 3377 hours of program execution with EPS for automatic positioning of rails and suction cups Suction cups and Uniclamps included Available in July

Condition: used, Year of construction: 2014, total height: 2,800 mm, total length: 6,900 mm, total width: 2,800 mm, Empty weight: 6.100 kg Price: On request - Details: - └ Description: Needs repair to B-axis and leaks to seals - Year: 2014 - Documentation available: No Hodsyr Rnuopfx Abvjfd - CE certificate present: No - Serial number: 10333 - Number of milling spindles [pcs.]: 2 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 3 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - Tool changer positions [pcs.]: 45 - Safety feature: Safety mat, Enclosed fence, Door interlock switches - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Becker - └ Type: Vtlf 2.250 - └ Year of manufacture: 2011 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Connection diameter [mm]: 60 - └ Vacuum pressure [bar]: 200 - └ Oil free: Yes - Tools included: Yes - CNC documentation available: User keys/licenses, USB stick - Table length [mm]: 4800 - Table width [mm]: 1500 - Voltage [V]: 400 - Current consumption [A]: 39 - Fuse [A]: 63 - Power [kW]: 22.8 - Transport dimensions: 6900mm x 2800mm x 2800mm (l x w x h) - Transport weight [kg]: 6100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets