Band saw

Bomar Individual 620.460 DGH

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Isdpfxeul Svle Apnsib Weight: 1050kg The machine is fully refurbished and tested.

Condition: used, Column Drilling Machine Make: IBARMIA Model: A-35 Iedpfx Aew Hxbmepneib Year of manufacture: 1980 – workshop-tested Machine No.: 1294-C Speed: See technical data Accessories: - Automatic feed for drilling - Machine lamp - Machined coolant base plate - Coolant system - Operating manual Technical Data: 9 spindle speeds via gear stages 73/103/149/232/325/472/695/976 and 1415 rpm Right/left rotation 4 automatic drilling feeds: 0.1/0.2/0.4 and 0.4 mm Drilling capacity in steel (ST 60): 35 mm Drilling capacity in cast iron (GG 20): 45 mm Thread cutting capacity in steel (ST 60): M 27 Thread cutting capacity in cast iron (GG 20): M 33 Spindle taper MK 4 Spindle stroke: 200 mm Table dimensions: 510 x 510 mm (T-slot: 16 mm) Rotatable table plate Weight approx. 490 kg Used, sold without warranty.

Condition: used, Bandsaw Bomar 450SL. In good condition, documentation included. Can be tested in Kaunas. Specification: Model. Iijdoqk U Rrspfx Apnjb Bomar 450 450 Bomar 450 Bomar 450 Bomar 450 Bomar 450 Bomar 450 Bomar 450.

Condition: good (used), Year of construction: 1999, Technical specifications Ø: 1100 mm Ijdsv Tzxvspfx Apnoib Rectangular: 1300 x 1100 mm

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 capacity 45 degrees: round 550 mm capacity 45 degrees: square 550 mm capacity 45 degrees: flat 550x600 mm capacity 60 degrees: round 370 mm capacity 60 degrees: square 370 mm capacity 60 degrees: flat 370x600/450 mm saw band length 7260 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs Isdpfx Apefg E Hmenoib with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, bore capacity in steel (diameter) 60 mm bore capacity in cast iron (diameter) 70 mm threading cutting capacity: M50 throat 420 mm bore stroke 260 mm spindle taper MK 5 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 64 - 1210 U/min transmission ratio 12 Stufen column diameter 220 mm table surface area 600 x 600 mm total power requirement 4 kW weight of the machine ca. 0,82 t dimensions of the machine ca. 0,7 x 1,2 x 2,7 m Equipment: - Gears made of hardened and ground steel Isdpfxjfg U Tuo Apnjib - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: used, mileage: 186,400 km, power: 118 kW (160.44 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x4, overall weight: 3,270 kg, maximum load weight: 1,000 kg, first registration: 05/2019, loading space length: 1,600 mm, emission class: euro6, number of seats: 5, Year of construction: 2019, - Used Truck: Ford Ranger Double Cab 5 seats 4WD Limited. - Year: 05.2019, Engine: 2.2 TDCi 160 HP Euro 6, Automatic transmission, Mileage: 186,400 km. - Double cab pick-up with 5 seats, load bed length: 1,600 mm, with protective liner and load securing hooks. Four-wheel drive with electronic selector. Tow bar. Payload capacity: 1,000 kg. - Limited trim level, equipped with: Automatic climate control, SYNC 3 Touchscreen Radio with Bluetooth, USB and Navigation, Front and rear parking sensors with rearview camera. Cruise control, 17-inch alloy wheels, fog lights, heated leather front seats, central locking, trip computer, two keys, spare wheel. - Bodywork has some minor scratches and roof has minor hail dents, interior in good condition. Mechanically sound. Please note: Engine oil leak. - MOT valid until June 2027. Ijdpfjyy Rgbsx Apnjib CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sellers: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como) Lombardy. Opening hours: Monday to Friday: 8:30-12:15 / 14:00-19:00; Saturday: 8:30-12:00 / 14:00-17:00. - Certified mileage. - Test drive available by appointment. - Ownership transfer handled on site. - Custom financing options available. Carlo Mauri Srl declines all responsibility for any unintentional discrepancies present in this advertisement, which does not constitute any contractual commitment. The prices shown are excluding VAT and registration costs.

Condition: good (used), Year of construction: 2010, functionality: fully functional, coil weight: 16,000 kg, inner diameter: 640 mm, sheet thickness (max.): 5 mm, working width: 1,500 mm, total length: 24,500 mm, product width (max.): 1,500 mm, Longitudinal Slitting Line YC 180 Technical Specifications: Line length: 24.5 m Line width: 7.8 m Material thickness: 1.5 to 5.0 mm Max. coil diameter: 1.8 m Coil inner diameter: 640 – 800 mm Max. coil width: 1,500 mm Max. coil weight: 16 MT Installed power: 253 kW Line speed: • At 1.5 mm thickness: 110 m/min • At 4.0 mm thickness: 95 m/min Tooling & Accessories: • Slitting knives – total 186 pcs: Set 1 – 10 mm, Ø307: 26 pcs Set 2 – 14 mm, Ø315: 66 pcs Iedpfxowylavo Apnjib Set 3 – 14 mm, Ø315: 50 pcs New – Ø320: 44 pcs • Rubber rings – total 93 pcs: Set 1 – 25 mm: 31 pcs 15 mm: 12 pcs Set 2 – 25 mm: 31 pcs 15 mm: 18 pcs Set 3 – 25 mm: 31 pcs 15 mm: 18 pcs • Spacers: Slitter knife spacers: 480 pcs Separator spacers: Metal: 252 pcs Non-metal: 369 pcs • Spare slitter shafts: 1 complete set General Information: Manufacturer: Winfos, Taiwan Year of manufacture: 2010 In operation since: 2017 The machine is fully operational and can be inspected in production. Available for dismantling at the beginning of 2026.

Condition: new, Year of construction: 2025, Technical data: • Cutting diameter: 335 mm • Blade dimensions: 4400 x 34 x 1.1 mm • Work table height: 750 mm • Feed range: 5 to 2300 mm per stroke • Cutting area at 90°: flat elements 500 x 335 mm • Cutting range at 45°: approx. 330 mm • Cutting area at 45°: flat elements 320 x 335 mm • Round cut at 45° (left side): 305 mm • Cutting area at 45° (left side): flat 305 x 335 mm • Maximum cutting range at 30°: approx. 180 mm • Cutting area at 30°: flat 170 x 335 mm • Cutting speed: continuously adjustable from 15 to 150 m/min • Maximum load material: 250 kg/m • Total installed power: 3.0 kW • Machine weight: approx. 2550 kg • Required installation space: approx. 4350 x 2300 x 1900 mm Standard equipment MEBAeco 335 DGA-2300: • Access protection in accordance with CE thanks to a light barrier. • Robust, two-column linear construction of the MEBA band saw with automatic material feed system (range 5–2300 mm per stroke). • CNC control for easy program entry and visualization. • Automatic cutting at any angle in the range of 30°–135°, with the possibility of setting the length and number of elements. • Possibility to create and manage up to 255 cutting programs. • Intuitive data entry reduces the risk of operator errors. MEBA High Performance Package: • Saw feed by servo drive and ball screw mechanism with automatic monitoring of cutting pressure and feed. • Constant and optimized working conditions when cutting a variety of materials, including thin-walled profiles. Iedpfowf Hm Ijx Apnsib • Precise and fast material positioning by means of AC rack and pinion drive with a stroke length of up to 2300 mm and integrated roller conveyor up to 3000 mm long. • Clamping jaw system that allows opening from both sides, with bars for transporting heavier materials. Design and functionality: • Robust saw frame made of welded vibration-resistant steel. • Saw blade set at a 3° angle to the table for increased efficiency and blade life when cutting steel profiles. • Integrated saw blade guides with precision bearings to minimize band deflection. • Carbide sliding guides for maximum precision. • Point 0 (rotate the miter saw) located at the intersection of the blade with the movable clamping jaw, eliminating the need for length correction when changing the angle. • Automatic programming of angles on the control panel. Vice system: • Patented double angle vice system with automatic adjustment of position to the cutting angle, which ensures a secure and precise grip of the material close to the cutting line. • Clamping performed by full-stroke actuators. Other functions: • Automatic lowering of the saw frame in front of the material when starting the cut, minimizing cycle times. • Optimal conditions for both single and serial cuts. • Infinitely variable band saw drive controlled by an inverter (15–150 m/min). • Precisely pre-machined elements eliminating play.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 saw band length 5850 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm Iodpfx Ajfgyifopnoib total power requirement 5,5 kW weight of the machine ca. 4,45 t dimensions of the machine ca. 5,85 x 3,6 x 2,7 m 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.