Drum chipper - wood shredder

BRUKS 602CS

Condition: excellent (used), Bruks 602 CS Drum Chipper - Inlet opening size: 540 x 300 mm - Drum diameter: 600 mm - Number of knives: 2 - Maximum wood thickness: 180/100 mm - Main motor power: 26 kW - Fan motor power: 11 kW - Capacity: up to 20 m³ of chips/hour - Standard chip length: 20-35 mm - Net weight: 1400 kg - Manufacturer: BRUKS (Sweden) Condition: tested, in working condition Conveyors are also available Gbsdpfxsxmbids Aqisr

Condition: used, Year of construction: 1987, pressure 160 t Gjdpfjtqqr Rex Aqiobr chamfer lenght 4000 mm distance between columns 3060 mm control FORTRON CNC 10 H 4 throat 280 mm stroke 250 mm dayligth 500 mm table length 4050 mm table width 280 mm feed down 70 mm/sec feed up 68,4 mm/sec working feed 9 / 3,5 mm/sec operating pressure max. 205 bar oil volume 400 l total power requirement 19,5 kW weight of the machine ca. 20,8 t Total weight including accessories 22 t dimensions of machine L x W x H 4,8 x 1,88 x 2,93 m dimensions of switch cabinet 1,6 x 0,5 x 2,25 m - 3-axis machine - Acc.: programmable back gauge, upper and lower dies, table extensions

Condition: used, Complete pellet production line with a maximum capacity of up to 5 tons per hour (limited by dryer capacity). Pellet Presses (3 units): CPM 7122 CPM 7922-2 CPM 7930-4 (only ~200 working hours) Hammer Mills (3 units): Maier hammer mill for wet material Maier hammer mill for dry material Kamas hammer mill (for burner material production) Cooling System: CPM pellet cooler Additional Information: Electrical and control systems are fully integrated into container units Gbsdpfx Aqoyvz Afeier Production line has been in operation for approximately 2 years Belt conveyor, reception hopper 4 kW Dryer: distributor reception hopper 2,2 kW Conveyor belt, reception hopper 2,2 kW Worm conveyor for drum dryer 2,2 kW Drum dryer 7,5 kW Main cyclone 90 kW Sluice head cyclone 7,5 kW Fan cyclone 18,5 kW 1 Sluice cyclone 1 2,2 kW Sluice cyclone 2 0,55 kW Sluice cyclone 3 0,55 kW Worm conveyor for cyclones 1-3 3 kW Hammer mill – Maier 160 kW Hammar mill for dust burner – Kamas 110 kW Hammar mill for woodchips – Maier 132 kW Worm screw for elevator 4 kW Elevator for buffer pocket 7,5 kW Buffer pocket high/low 8/4,5 kW Scraper conveyor for the presses 2,2 kW Worm screw for dust mill 2,2 kW Press 1 CPM: Model: 7122 Main engine 160 kW Cascade mixer 7,5 kW Feeding screw 2,2 kW Oil lubrication 1,5 kW Grease lubrication 0,18 kW Press 2 CPM: Model: 7922-2 Main engine 250 kW 200 kW Cascade mixer 7,5 kW Feeding screw, frequency converted 2,2 kW Oil lubrication 1,5 kW Feeding screw 4 kW Press 3 CPM: Model: 7930-4 Work only 200 hours Main engine 250 kW Cascade mixer 7,5 kW Feeding screw 2,2 kW Oil lubrication 1,5 kW Oil cooler 2,2 kW Grease lubrication 0,18 kW Conveyor for warm pellets 2,2 kW Belt conveyor to the refrigerator 2,2 kW Pellet refrigerator, outflow 1,5 kW Fan for the pellet refrigerator 11 kW Fan for the suction 5,5 kW Elevator 2,2 kW Belt conveyor 1,5 kW Belt conveyor 4 kW Combustion air fan 45 kW Conveyor fan 22 kW Conveyor fan 11 kW Silo filter 0,04 kW Filter fan 4 kW Screw for dust silo 2,2 kW Driving motor for dust silo 1,1 kW Oil pump 1,5 kW Dosing screw 0,75 kW Sluice feeder 0,37 kW

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Gbsdpjqmi Irofx Aqier Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Following a revision of our long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, supplied complete as per the original OEM scope. The unit is BRAND NEW, fully manufactured and tested by the OEM, but it has never been installed or put into service. It remains under the manufacturer’s warranty and has been stored in a closed, controlled environment. Immediate availability eliminates typical production lead times, which for this type of equipment are generally 24–36 months. Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated three-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated output: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless construction, parallel grid operation ready Included systems: - Integrated baseplate oil system - Main mechanical oil pump and auxiliary electric oil pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and process steam Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning support from the manufacturer available Potential application fields: - Biomass and waste-to-energy plants, for electricity and process steam production, with immediate unit availability, avoiding multi-year production lead times - Industrial cogeneration (CHP) for facilities with continuous process steam use (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants, as a fast-track alternative to new OEM supply with 24–36 month delivery lead times Gbjdpjyidvdjfx Aqior Price: on request. Further technical information and documentation available upon request.

Condition: used, Year of construction: 1997, functionality: fully functional, For sale a round log sorting line by Nurminen. 40 pockets, Scanner Finnos Fusion CU-2 with X-Ray was reinstalled in 2022. Speed 100 m/min. Maximum log input length - 6.1 m, Minimum log input length - 2.4 m, Gbedpfsxgt U Eox Aqijr Maximum log diameter- 550 mm,, Log handling - Stationary crane, Transversal loading feeder, Number of cross conveyor chains- 6, Conveyor length of the loading cross conveyor - 34.198 m, Log singulation Log measurement - in-line, Sorting line length - 140 m, Ejectors in the sorting line - Yes, Number of ejectors in the sorting line - 40, Rundholz-Sortierboxen - Concrete, steel; Sorting boxes - 40, Box length max - 7 m Box width max - 2.5m Box height max - 1.2m Continuously variable feed, Sorting by - Quality, Diameter, Length; Space requirement Length - 180 m, Space requirement Width - 30 m,

Condition: ready for operation (used), Drum chipper type Bruks type 1202 CS6 for production of high quality pulp chips from bulky mixed waste such as: Edgings, slabs, trim ends, plywood, veneer and joinery waste and log tops. The chipper can produce pulp and board chips, or fuel chips. Gbedpfeuhvhpex Aqior Capacity up to 50 m3 chips per hour With bigger electrical motor up to 100 m3 of chips per hour Electrical motor 75 kW

Condition: used, Używana suszarnia rurowa do pracy ciągłej z sekcją chłodzącą produkcji COMESSA wykonana ze stali kwasoodpornej AISI 304. Komora o wymiarach: Ø 2400 x długość 14000 mm. Długość części suszącej: 7000 mm. Długość części chłodzącej: 7000 mm. Poprzednie zastosowanie: suszenie białego cukru z wydajnością do 30 T/h. Ślimak ze stali ko napędzany silnikiem el. o mocy 7,5 kW. Wentylator nadmuchowy wykonany ze stali ko, napędzany silnikiem elektrycznym o mocy 7,5 kW. Wentylator chłodzący wykonany ze stali ko, napędzany silnikiem el. o mocy 11 kW. Elementy instalacji do podgrzewania wstępnego, suszenia i chłodzenia wykonane ze stali kwasoodpornej. W zestawie dokumentacja producenta. Gedpeyhc N Nefx Aqiebr Suszarnia dostarczana jest bez: Silnika elektrycznego do napędu suszarni o mocy 45 kW. Wentylatora wyciągowego napędzanego silnikiem elektrycznym o mocy 55 kW. Nagrzewnicy parowej. Pełny opis oryginalnej instalacji na zapytanie. Weight: 21500kg Dimensions: diameter 3.35m x lenght 14m

Condition: good (used), Year of construction: 1999, MOSCA strapping press Automatic pallet strapping machine, model KPK-121-18 Year of manufacture: 1999 The control system is S7. The strapping machine is equipped with 2 strapping heads. The press has a walk-in roller conveyor with a turnstile. Occupancy dimensions including pallet: Length: 1,200 mm Width: 1,200 mm Height min. 500 mm max. 1,600 mm Technical data: Continuously adjustable belt tension: 200 – 2,000 N Belt guide speed: 4.6 m/s Type of closure: friction weld closure Dimensions of the control panel: Width = 1,200 m, depth = 650 mm, height = 850 mm Dimensions of the packaging press: Max. clearance height: 1,600 mm Max. clearance width: 1,500 mm Length of the pressure plate: 1,600 mm Pressure force: up to max. 50,000 N selectable via potentiometer Belt guide distance: 440 mm Drive: via pole-changing Gear brake motor Rapid traverse speed: 150 mm/sec Gsdpfx Aqsq Svgksiebr Pressing speed: 37 mm/sec Conveyor belt in the pressing area: Usable width: 1,500 mm Length: 2,100 mm

Condition: used, Valon Kone VK450 with infeed conveyor. Gedpfx Asvt S R Aeqiebr