Powder coating oven on Gas 1500x5000x200

Bumex Sp. z o.o. TPG1550

Condition: good (used), Drying oven for uv line Bledpfx Aet Ag Uqsbpsc

Condition: good (used), Marble plate Length: 3500 mm Width: 1500 mm Thickness: 300 mm Height on feet: 930 mm Number of feet: 5 feet Blsdjig Hu Nspfx Abpoc 1 small failure on the top (L 150 mm x W 20 mm) - see photo Weight: approx 3 T

Condition: good (used), Complete AMMANN asphalt mixing plant. The ERMIIS automation was installed in 2013, replacing the original AMMANN automation. Capacity: 160 tons/hour. The plant is operational until January 2026. Bedexqpvtspfx Abpslc

Condition: used, functionality: fully functional, Year of construction: 2009, machine/vehicle number: 1017, Used production line for blocks of concrete (and expanded clay). The line was used to produce concrete blocks using expanded clay. From 2023-08, the line is no longer in operation, it has been preserved. Line of blocks in order: - 2 pcs. small silos (with vibro, with pneumo flaps). - Raw material supply conveyor to the weighing hopper. - Weighing hopper. - Raw material supply conveyor from the weighing hopper to the mixer. - Mixer FK Machinery (Poland, 2022, bucket capacity 1200 l, engine power 18.5 kW). - Conveyor for feeding the mixture from the mixer to the SIGMA 1000 vibro press. - Vibro press SIGMA 1000: Type mark: PIERRE ET BERTRAND SIGMA 1000 with automatic TELEMECANIQUE control Manufacturer: ADLER S.A.S. Route de la Bourde, 60360 CREVECOEUR LE GRAND, France Serial no./year of manufacture/year of renovation - 1017/1989/2009 Area on the board (palette): 1130 mm x 550 mm (long x wide) Height of products - max 250 mm - Production shelf. - From the production shelf, the production is transported by autoloader to the mechanism where the production is automatically reloaded from the production boards onto the pallets. Production boards are automatically returned to the vibro press. - Control board with programmer. - Electric switchboard. Bsdeuc Tzvspfx Abpslc 2022 year of production Mold 200 x 185 x 490 with which we have been working for the last year. There are many other used Moulds. There are about 500 pieces production boards. There is no compressed air compressor. We can provide disassembly, assembly and equipment startup services.

Condition: new, functionality: fully functional, Year of construction: 2025, Box Type Electrostatic Powder Coating Oven: Length: 500cm, Width: 250cm, Height: 300cm Bodpfx Absv Nvndspjlc - Powder Coating Booth with Filter: Length:300cm, Width:220cm, Height:270cm - Electrostatic Powder Coating Equipment: Model: HMK MULTICOLOR, Type of Use: Manual

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. Bledpfxsfz U S Ee Abpjc - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: new, Year of construction: 2026, Size: 6 Nominal heat output: 170kW -- BImSchV stage 2 and CE conform-- Blodpfx Absdlhdbjpjc combustion chamber completely fireclayed For rooms of: 4.800 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes fuel consumption: 40 - 50 kg/h Blower air capacity, free blowing: 14.000 m³/hour Outlet opening: Ø 700mm Flue pipe connection Ø 220 mm Weight: 2.150 kg SPS control cabinet: 380 Volt

Condition: excellent (used), functionality: fully functional, Technical data for the document shredding system: Manufacturer HSM GmbH + Co KG General data for the two-stage shredder system: Type Duo Shredder 5750 Year of manufacture 2015 Operating hours 3,093 hours Bodpfowrybrox Abpjlc Throughput capacity up to 800 kg/hour, depending on material Rated power 30 kW Rated current 62 A Particle cutting size 6 x 40 - 53 mm Fuse protection 63 A gG/gL/C/K Weight of shredder approx. 2500 kg Data on the pre-shredder: Shredder type V 570 Working width of the cutting unit 500 mm Particle size 20 x 155 mm (w x l) Nominal power of pre-shredder 2 x 5.5 kW Nominal current of pre-shredder 2 x 11.5 A Data on the secondary shredder: Shredder type P 500.2 Working width of the cutting unit 500 mm Particle size 6 x 40 – 53 mm (w x l) Nominal power of secondary shredder 9.2 kW Nominal current of secondary shredder 18 A Security level according to DIN 66399 P-3, O-2, T-3, E-2 Baling press data: Type KP 100.1 Year of manufacture 2015 Operating hours 2,377 hours Pressing force 9 - 12 t Bale weight 40 – 150 kg/bale, depending on material Cycle time 7–16 seconds Feed chute dimensions 450 x 580 mm Bale size 630 x 500 x 400-1000 mm (w x h x l) Triple horizontal binding Press dimensions 3990 x 2225 x 1735 mm (l x w x h) Weight of press approx. 1000 kg Dimensions of entire system, conveyor belt, shredder and press: 9560 x 2071 x 3550 mm (l x w x h) Function description: This is a complete system consisting of a feed conveyor belt, a two-stage shredder and a horizontal baling pres. The material is fed onto the conveyor belt, shredded in two stages and then pressed into stackable bales. A second cutting unit and various motors are available as spare parts for the system. Comments: The documentation (Manual, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2025, functionality: fully functional, As a leading manufacturer of systems for surface technology, we offer you an almost limitless portfolio for powder coating applications. At our site in 47669 Wachtendonk, we turn your individual requirements into reality and produce your desired concept. Thanks to our in-house production for almost all components, we are flexible and can respond specifically to your requirements. We not only provide you with your ideal powder coating system - we are also on hand with comprehensive user expertise to support you in all matters relating to surface technology. Every item offered here is manufactured especially for you. Whether large or small projects - we supply complete systems from a single source, tailored to your requirements. We look forward to hearing from you and implementing your ideas together! Example: KM Pro KM Pro electric chamber oven Heating type electric Air circulation Heating capacity 30kW Circulating air motor 3kW Insulated up to 250°C Connected load 380-400V, 34kW Floor insulation 100mm Insulation walls 150mm (highly compressed) External dimensions : 3400mm (L) x 1800mm (W) x 2550 (H) without fan motor on top and switch cabinet on the side Working dimension (inside) 3100mm (L) x 1200mm (W) x 1880m (H) Height due to the low-lying rails ≠ 2000mm Equipment - Double-wing door, incl. door bolt and handle - Adjustable air slats (optimum air circulation regulation) - 2 pcs. Heating coil - 2 PT 100 temperature sensors (top and bottom) - Exhaust air throttle flap, manual adjustment (exhaust air regulation) - 2 rails on the oven ceiling Bledpfx Abjtxcpwspoc - Walls made of galvanized sheet steel Control system : - Rittal control cabinet - Hitachi panel 7 inch (touch operation) - Control via Hitachi PLC - Speed control of the air circulation motor via frequency converter, with braking resistor - Emergency off - Adjustable control power of the heating coil (if current peaks are reached, you can regulate the oven down) - GELLING function for stoving different colors in one oven (air circulation motor is throttled over a period of time) - OPEN-DOOR function regulates the air circulation downwards when the door is opened. So you have less heat loss - Traffic light to indicate the respective status. - STAY-HOME-WARM-UP is a time-controlled switch-on of the oven. This allows you to start the oven before starting work. - SEE-TEMP shows the temperature curve of the oven. This allows you to check the temperature. - GO-HOME-LEAN-BACK switches the oven off via a time control.

Condition: new, functionality: fully functional, Year of construction: 2025, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Bedpfxsrq D Nij Abpjlc Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.