Press Brake

Bystronic PR6

Condition: excellent (used), functionality: fully functional, stroke length: 310 mm, controller manufacturer: Cybelec, controller model: DNC 1200, working width: 3,100 mm, bending force (max.): 100 t, distance between stands: 2,550 mm, control type: CNC control, back gauge adjustment: CNC-controlled, number of axes: 7, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, upper tooling, Bystronic 100 ton x 3100 mm PR6. 7 Axis X. R. Z1. Z2. X1 100 mm Extra Daylight & Stroke Hydraulic Crowning Hydraulic Upper Tool Clamping Full Upper & Lower Tooling Csdpfsyxhhmsx Al Aohc Cybelec 1200 Colour Graphic Control

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, operating hours: 600 h, power: 0.011 kW (0.01 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 35 t, stroke length: 300 mm, operating speed: 180 mm/s, reverse speed: 180 mm/s, table width: 60 mm, table height: 100 mm, clearance between the columns: 1,375 mm, total length: 2,250 mm, total width: 1,820 mm, total height: 2,515 mm, overall weight: 4,900 kg, controller manufacturer: Lenze, controller model: SafanDarley E-Control, working width: 1,275 mm, bending force (max.): 35 t, back gauge: 1,000 mm, back gauge speed R-axis: 150 mm/s, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 1,375 mm, height adjustment type: electric, installation height: 1,000 mm, warranty duration: 12 months, control type: CNC control, number of axes: 7, actuation type: electric, Equipment: CE marking, safety light barrier, The E-Brake Premium 35t-1250 is the fastest servo-electric press brake on the market, manufactured by SafanDarley. Lenze servomotors controlled by frequency inverters from the same company enable fast and reliable operation of the system for many thousands of operating hours. The SAFANDARLEY E-Brake features a patented drive transmission method, which is implemented using reinforced belts. The roller system creates what is known as a multi-block or multi-pulley system. This principle has been known for years, but its successful implementation in SAFANDARLEY press brakes since 1995 has resulted in a press that is approximately 30% faster than hydraulic presses, quieter, more environmentally friendly, and eliminates the need for oil changes. Parameters: SAFANDARLEY servo-electric press brake, model E-Brake 35-1250 - Pressing force: 350 kN (35 tons) - Stroke: 300 mm - Opening: Q = 690 mm - Accuracy of the upper beam: +/- 0.01 mm - Max. bending speed: 10 mm/s - Max. speed of the back gauge fingers: 350 mm/s - Max. reach of the back gauge fingers (third point of reference): 1000 mm - Connected power: 11 kW - Machine width: 2225 mm - Machine depth: 1820 mm - Machine height: 2550 mm - Weight: 4,300 kg - Servo-electric drive (without hydraulic system) SAFAN E-Control – numerical control system - Dual 21'' color split-screen touchscreen (The lower part of the screen enables programming, and the upper part allows viewing PDF documentation, DXF files, or a 3D visualization of the bending process) - Swivel arm - ELO Touch technology EC20 – 2D graphics program, overlay for the E-Control control system CNC axes: Y1, Y2 – CNC-controlled axes X – CNC-controlled axis deltaX – CNC-controlled axis R – CNC-controlled axis Z1, Z2 – CNC axes Safety light guard – programmable light curtain: Basic function – safety Cedpor Axxzefx Al Ashc Interruption operation function – 1 cycle / 2 cycles Curtains can be disabled in safe mode WILA NSCL I HC upper adapter – hydraulic upper tool clamping system Safan OBS/3 table – lower tool mounting system, compatible with Wila/Trumpf or Amada tools, table with a width of 60 mm and a 13 mm groove Ergonomic package: cutout in the table for working in a seated position, ergonomic tables, ergonomic chair E-Bend S system – sheet thickness measurement system with automatic deflection correction The machine is in like-new condition. Inspection, testing, and presentation are possible on-site – Sosnowiec. Each unit undergoes a full technical inspection and quality testing by an authorized SafanDarley service center.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, pressing force: 150 t, working width: 4,100 mm, working range: 4,100 mm, Used high quality very accurate Edwards Pearson PR6 150/4100 CNC Pressbrake for sale New / Year 2002 Total axis: 6 axis complete with Crowning Capacity: 4.1m x 150ton / 4100mm x 150ton Fully serviced Csdpfx Ajv Ub Elel Ajhc Very late Pr machine before Bystronic pressbrakes Complete with with: Cybelec CNC Control with Colour Graphics  Y1, Y2, X, R, Z1, Z2 Max stroke 215mm Sick Infrared Lightguards Full Top and Bottom Tooling Has come from a company that manufacture’s for the architectural sector and has mainly been folding aluminium New tooling to fold your products on this press available Can be seen working

Year of construction: 2004, condition: like new (used), Used high quality Bystronic Edwards Pearson PR6 cnc pressbrake for sale – manufactured by Beyeler GMBH Bystronic Edwards Pearson PR6 100/3100 CNC Pressbrake 3metre x 100ton / 3100mm New / Year 2004 Hydraulic tool clamping Hemming table – to be confirmed 4 axis back gauge – z1, z2, x and r axis – 6axis in total Cybelec Modeva 10 Chodpfx Alehgl S Sj Ajc Machine in good working condition including upper & lower Pressbrake tooling. Fully serviced by Bystronic uk The full services of New tooling, delivery, installation, training and guarantee are available form us on this machine

Condition: as good as new (ex-display), Year of construction: 2007, I - beam section - flat steel 50 x 10 mm I-beam section - upend 80 x 15 mm L-beam 50 mm round material 30,0 mm bar material dia. max. 1 1/2" mm bar material - diameter 30,0 mm weight 185 kg range L-W-H 670 x 530 x 1350 mm square material 40 x 40 x 3 mm pipes 60 x 2,0 mm Thickness of tenon 30 mm total power requirement 0,75 kW Demonstration device Equipment: • Base frame of the machine Cedpfx Alet U R H Ue Ashc • Foot switch • Standard-rolls (divided) • Possible to bend horizontally and vertically • machine has only one drive (right-left-run)

Condition: used, Year of construction: 2023, turning diameter 380 mm turning length 1000 mm control Mazatrol SmoothG max. swing diameter over bed 695 mm Standard machining diameter 276 mm bar material dia. max. 80 mm x-axis 234 mm rapid traverse X-axis 30 m/min y-axis 100 mm rapid traverse Y-axis 21 m/min z-axis 1090 mm rapid traverse Z-axis 33 m/min w-axis 1050 mm rapid travel W 30 m/min Cedpfx Alszzd Rte Aohc turning speeds 35 - 4000 U/min spindle nose A2-8 spindle bore 91 mm Motor output (30-min. rating) 26/22 Max. Torque 465 (15% ED) Nm turning speeds 35 - 6000 U/min spindle nose A2-5 Motor output (25%ED) 11 Max. Torque 90 (15% ED) Nm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20 x 2,5 coolant tank 270 l Chuck diameter main spindle 10 '' Chuck diameter counter spindle 8 '' total power requirement 37 kW weight of the machine ca. 6,6 t dimensions of the machine ca. 3,6 x 2 x 1,9 m Machine in standard configuration, equipped with the following optional equipment: Air blast through the turret Automatic operator door – opening and closing Air blast system at the main spindle chuck Chip conveyor High-pressure coolant system, 15 bar Robot interface (ADVANCE / Ethernet/IP) C-axis on the sub-spindle, input resolution (contour/indexing): 0.0001° Additional push buttons on the CNC control panel Sub-spindle tailstock function Rectangular 3-colour LED signal light Preparation for oil mist extraction, mechanical flange only, Ø 98 mm Absolent 10C oil mist extraction system Preparation for bar feeder Overload monitoring system Drilling cycle with torque-dependent chip breaking Engraving function Thread re-cutting function All dimensions, weight and performance specifications are non-binding. Used machine – sold without warranty.

Condition: used, Year of construction: 2014, total length: 1,500 mm, total width: 1,150 mm, total height: 2,400 mm, Weight: 3.600 kg - Year: 2014 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 441 - Power [kW]: 3.0 - Press force [ton]: 28 - Max. working width [mm]: 1000 - Column gap [mm]: 950 - Throat depth [mm]: 220 - Backgauge depth [mm]: 415 - Transport dimensions: 1500mm x 1150mm x 2400mm (l x w x h) - Transport weight [kg]: 3600kg Chodoxapftepfx Al Aec - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2025, condition: new, Standard version with column Motorized height adjustment 700 mm Articulated arm length 2 x 1,100 mm Height adjustment of the grinding spindle 130 mm Grinding motor 5.5 kW Including the following options: + Speed control, spindle speed approx. 250 – 1,000 rpm Codegn Tzlspfx Al Aehc + Pneumatic grinding pressure support + Bellows cover for column and trapezoidal spindle + Incl. foundation bolts and mounting template Grinding tools available as an option Request more information

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity Codpfx Aeuiy Ngjl Aohc New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Condition: as good as new (ex-display), Year of construction: 2023, Container rotating device, 10-ton lifting capacity Cedpfsd Nmx Tsx Al Ashc Speed: continuously adjustable Hand and foot remote control Diameter: 320mm to 2800mm Roller diameter: 300mm Speed: 6 - 60 m/h Power: 2 x 0.55 kW