Can making line

Cask 3 Head Fill Station

Year of construction: 1997, condition: ready for operation (used), A complete brewhouse SSP Lichtenvoorde, purchased from the Paul Mueller Company, is available. Components: mash tun, lauter tun, whirlpool, working platform, CIP system, spent grain container, and wort pump. Brew length: 40hl, min. brew length: 25hl, min. part mash: 12hl, spent grain container volume: 2.5m³, brews: 2, pumps: 4, wort cooling pump type: E-Hygia-Bloctronic I/25b, CIP system tanks: 2, heat exchanger: Pfaduko VT20 , capacity: 26l, max. temperature: 100°C. The system is equipped with a brewhouse automation including Siemens OP37 and PROSYT control, but this is defective. If desired, the brewhouse can be purchased at an additional cost with newly installed control, automation accessories, and general overhaul. Documentation available. An on-site inspection is possible. Bodpjxfvh Sefx Aiwsww

Condition: used, Year of construction: 2017, machine/vehicle number: LC560, Used Processing Line for small dairy products 2000 L/h Milk Reception and Initial Storage The Used Processing Line for Small Dairy Products 2000 L/h begins with a milk reception unit consisting of two Lactofreeze tanks and a receiving pump. Initially, operators channel raw milk into the tanks, where it remains chilled. As a result, the system ensures thermal stability before processing. Furthermore, this setup minimizes the bacterial load while allowing continuous transfer to the pasteurization stage. Pasteurization and Separation Next, the pasteurization phase uses a plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour. Specifically, the pasteurizer rapidly heats and holds milk at a predefined temperature to eliminate pathogens. Then, the GEA WESTFALIA separator—rated at 3,000 L/h—performs cream separation. Simultaneously, the RANNIE homogenizer (1,000 L/h) reduces fat globules, thus enhancing emulsion stability and preventing cream rise. Fermentation and Coagulation Following thermal treatment, the milk proceeds to fermentation. Here, operators use an insulated double-wall fermentation tank with a 1,000-liter capacity and planetary agitator. Consequently, they maintain uniform bacterial activity and precise temperature control. In parallel, a 1,000-liter coagulation vat equipped with a planetary mixer initiates the curdling process. Both tanks ensure optimal protein structuring for yogurt, cheese, and cultured cream products. Cheese Processing and Draining After coagulation, the Used Processing Line for Small Dairy Products 2000 L/h continues with cheese processing. The system includes a 500-liter vat with a draining sieve and two cheese draining tables. Therefore, operators can efficiently handle large curd volumes. Moreover, these components simplify whey separation while ensuring sanitary compliance. Additionally, their design supports easy cleaning and cross-contamination prevention. Packaging Operations Once products are ready for packing, the line integrates semi-automatic and automatic solutions. First, a semi-automatic filler doses pasteurized milk into 1-liter bags. Subsequently, the yogurt cup filler automatically fills and seals 75 mm and 95 mm cups at up to 1,800 units per hour. Meanwhile, the rotary labeling machine by ETICAP (2004) applies both front and rear self-adhesive labels on cylindrical cups. Importantly, the machine ensures consistent alignment and adhesion. Date Coding, Thermal Control, and Final Packing Bwjdow Ahg Rspfx Aiwow In addition, a Videojet 1220 coder (2019) applies expiry dates onto each product via belt conveyor. Further downstream, a vacuum packaging machine handles cream and cheese portions. Thermal utilities include a 115–150 kW solid fuel boiler (2014) with dual transfer pumps. At the same time, an ice water tank (5,000 L, 2014) and a cooling unit (2018) maintain temperature consistency across the line. Laboratory and Accessories Alongside processing units, the Used Processing Line for Small Dairy Products 2000 L/h features a dedicated laboratory. Specifically, it houses analytical tools for quality control and milk analysis. Additionally, the line includes 300 plastic crates for storing and transporting yogurt cups. System Shutdown and Storage Finally, operators shut down the line in September 2023. Before dismantling, they cleaned ...

Condition: used, Year of construction: 2021, We are offering these used DME 40HL 40HL insulated fermentation tanks, manufactured in 2021. Bwedeza Twnjpfx Aiwow Manufacturer: DME Model: 40HL Date of manufacture: 06/23/2021 Serial number: B5715-30-03 Year of manufacture: 2021 Condition: used Type: 40HL insulated fermentation tanks If you have any questions or would like more information, please feel free to send us a message or call us. Price per unit.

Condition: used, Year of construction: 2018, Overview  This brewhouse was manufactured in 2018 by Slovenian company SKRLJ d.o.o. The BH-3 brewhouse has a batch capacity of 20 hL and is designed as a semi-automatic system with steam heating. It includes all main process vessels and a wide range of accessories, making it suitable for medium-sized breweries. The system is currently available. Technical data - Capacity: 20 hL per batch - Hot water tank: 4,586 L, steam heating jacket - Cold water tank: 4,400 L, glycol cooling jacket - Heating: Steam - Control: Semi-automatic with PLC Scope of Delivery  - Brewhouse | SKRLJ d.o.o. | BH-3 | 2018 | 20 hL, semi-automatic, steam-heated - Hot water tank | SKRLJ d.o.o. | – | 2018 | 4,586 L, steam heating jacket - Cold water tank | SKRLJ d.o.o. | – | 2018 | 4,400 L, glycol cooling jacket - Grist bin | SKRLJ d.o.o. | – | 2018 | 500 kg capacity Bsdpfxjxcng Ie Aiwjww - 2-stage heat exchanger | SKRLJ d.o.o. | – | 2018 | Stainless steel - Accessories: wort aeration system, spent grain remover, grist hydrator, CIP sprayballs, temperature probes, steam jacket solenoids, 2 sanitary centrifugal pumps, electronic flow meter, manual cold/hot water mixer with thermometer, PLC for pump/recipe/temperature control  

Condition: used, Year of construction: 2000, Manufacturer: STAM Model: Stam 2000-3 Year: 2002 Condition: Used Stock number: 0395 Uncoiler – max. weight (ton): 30 ton Uncoiler – max. width (mm): 2,000 mm Uncoiler – min. width: 400 mm Uncoiler – outer coil diameter: 1,800 mm Uncoiler – hydraulic expansion: 508 mm min. 610 mm max. Bedpfx Aoywd Akoiwjww Straightener – strip width: 2,000 mm Straightener – max. strip thickness: 3 mm Straightener – min. strip thickness: 0.6 mm Straightener – number of rolls: 17 Straightener – roll diameter: 46 mm Electronic feeder – min. pitch: 250 mm, max. pitch: 4,000 mm.

Condition: used, Year of construction: 2016, Overview This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details  Filler | CIMEC | AM DPS 9-8-1C | 2016 - Output: 1,800 bottles/hour - Number of rinsing nozzles: 9 - Number of filling valves: 8 - Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) - Electrical power: 6 kW, 400V, 50Hz - Dimensions - Width: 1,400 mm - Length: 3,200 mm - Complete length with labeler: 8,800 mm - Operating hours: 1,370 hours - Complete documentation available Capper | Arol | TSI-Eagle C | 2016 - Pitch diameter: 410 mm - Number of heads: 1 - Type of closure: Standard crown cork - Complete documentation available Bjdpfx Aisvy D Adowjww

Condition: used, Guard Rail Roll Forming Line: • The production line for road safety barriers consists of: • Accessories and rollers for the production of 2- and 3-wave guard rails • Bending machine for 2- and 3-wave profiles • 19-station roll forming machine, complete with rollers and motorization • No. 3 punching stations • No. 1 cutting station • No. 7 hydraulic power units • No. 1 station with feeding rollers Bwodpjxnmmqofx Aiwsw

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: X82600, clamping force: 12,000 kN, screw diameter: 150 mm, clearance between the columns: 1,200 mm, displacement volume: 12,193 cm³, injection pressure: 1,500 bar, injection weight: 11,584 g, opening stroke: 1,400 mm, Used Stork IMM 12000-19000 injection molding machine. Bjdpfx Aowhkfyoiwoww

Year of construction: 2024, operating hours: 150 h, condition: like new (used), functionality: fully functional, X AXIS (longitudinal) (mm) 7,500 Y AXIS (transversal) (mm) 1,280 Z AXIS (vertical) (mm) 640 Bodpfx Aijz Dpduswsww A AXIS (vertical-horizontal rotation of the head) -90° ÷ +90° C AXIS (rotation on the vertical axis of the head) 0° ÷ 360° H AXIS (jaw positioning) (TKE 955 HP) (mm) 6,600 P AXIS (jaw positioning) (TKE 955 HP) (mm) 6,600 ELECTRIC SPINDLE Maximum power in S1 (kW) 11 Maximum power in S6 (60%) (kW) 13.5 Maximum speed (rpm) 24,000 Maximum torque in S6 (Nm) 10.7 Tool holder taper HSK – 63F Maximum blade diameter 400 mm

Condition: used, Year of construction: 2000, functionality: limited functionality, overall weight: 8,000 kg, type of input current: AC, Equipment: documentation/manual, Curd pre-pressing vat with a capacity of 12,000 litres and filling station cheese moulds from Tetra Pak Tebel. Year of manufacture 1999. In good condition, but with obsolete automation/PCL. We can provide PLC replacement and refurbishment on request. Available to visit. Documentation available. Bsdpeulnrvsfx Aiweww