Thicnkesser

Casolin TOP

Condition: good (used), Year of construction: 2002, Robust T 26 Tilting Spindle Moulder, tiltable from -45 to +45 degrees, with 2-axis Duocontrol positioning control Tilting spindle moulder in excellent configuration A real treat for any Martin enthusiast Pole-switchable drive motor 5/6 kW with automatic motor brake Forward/reverse operation Tilting angle electrically adjustable from -45 to +45 degrees Max. height adjustment 150 mm, electrically adjustable When adjusting the height, the correction factor for the tilting angle is displayed on the upper display, which is then set at the stop—this allows settings according to drawings to be easily realized Four spindle speeds: 3000, 4500, 6000, and 9000 rpm Spindle diameter 30 mm, quick-change spindle with torque wrench Electrically adjustable fence, infeed jaw adjustable with handwheel and SIKO counter Axes can be operated manually or automatic positioning of height and fence Fence can be swung away with lift device (for curved work) Table opening via eccentric table rings, electrically adjustable Table extensions on the right and left with extendable workpiece support Support extension up to 700 mm Table length approx. 2400 mm Swing-away fence for tenoning work Original Martin aluminum fence jaws with two ribs Aigner Centrex workpiece pressure device 3-roller HolzHer 1117 power feed, with 8 speeds, forward/reverse, new rollers Power feed socket, switchable from the control unit Two extraction ports, each 120 mm Compressed air connection 6 bar Emergency stop switch Some machine parts have been newly repainted Approx. 7400 operating hours Operating instructions CE mark Kfedpfevv H T Rsx Ah Uja Dimensions approx. 3000 x 1700 x 1830 mm (L x W x H). Weight approx. 1800 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse—see "other offers from this provider".

Condition: excellent (used), functionality: fully functional, Used sharpening machine made in Germany, Vollmer CX100, in good working condition. The machine sharpens circular saw blades and trimmings with an outer diameter from 80 mm to 500 mm. Sharpening is performed with oil cooling, allowing for high-quality results. The discs are sharpened automatically according to the program you set, both on the back and front surfaces of the tooth, including saws with trapezoidal teeth. The machine is equipped with a ventilation system for air filtration. Kfsdpfx Ahow Iwl Ee Usa

Condition: good (used), Year of construction: 1995, operating hours: 9,500 h, functionality: fully functional, CHP 250 Automatic Machine for Grinding the Complete Tooth Geometry of Carbide-Tipped Circular Saw Blades. The CHP250 controls two CNC axes for bevel grinding and grinding wheel infeed. Suitable for diameters from 80 to 810 mm and blade thickness up to 8 mm. Each tooth shape can be ground in one cycle either on the face or the back. Tooth pitch: 6 to 120 mm. Rake angle: -30° to +50°. Clearance angle: 5° to 45°. Tooth height difference up to 3 mm. Bevel grinding on the tooth back up to 45°. Bevel grinding on the tooth face up to 15°. Grinding wheel outer diameter: 125 mm; bore diameter: 32 mm. The machine is equipped with a filter cleaning system. The filtration unit is made of stainless steel. A knee switch releases the clamping carriage. Kfjdpfx Aexw Ip Ejh Uja Extraction unit and central lubrication are included. There is also a wide range of accessories, including saw blade holders and centering rings.

Condition: excellent (used), Year of construction: 2009, Tilting panel saw T74 by Martin with 3-axis scorer, 3m sliding table, and motorized rip fence From vocational school Operator panel at eye level with color touch-screen control Sliding table length 3000mm Saw blade tilting from 0 to 46 degrees Speeds 2800, 4000, and 5500 rpm with electronic speed display Reinforced drive motor 7.5kW with automatic motor brake Saw blade diameter up to 500mm Saw arbor with Pro-Lock quick-change system Maximum cutting height 170mm Cutting width up to 1100mm, electrically adjustable, positionable, and can also be moved manually Tilting angle and height adjustment electrically adjustable Cross-cut fence with 2-point support up to approx. 3350mm Parallelogram cross table with digital angle display Rip fence can be folded away Extraction nozzles 120 + 100mm Sliding carriage lockable in any position Handle 1 set of plastic saw blades with matching 3-axis scorer, freshly sharpened 3 riving knives Kjdpfx Ahsxp Rmdo Uofa 3-axis scoring unit, fully electrically adjustable while the machine is running 2 safety guards Tool compartment Emergency stop switch Operating manual CE mark Machine with minor traces of use on the anodized surface of the sliding table. Small cuts in the sliding table have been repaired. Original paint, only touched up in a few spots. Excellent condition from vocational school as shown in the original photos. Dimensions approx. 3150 x 3600 x 1700mm (LxWxH). Weight approx. 1950kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see 'other offers from this provider.'

Condition: excellent (used), Year of construction: 2006, Planer, Hofmann AHW 511 jointer with 4-knife Tersa cutterhead Kfsdjul Admopfx Ah Uoa Maximum planing width: 500mm Maximum cutting depth: 8mm Planing thickness adjustment: manual with scale Concave/bevel joint adjustment: manual with scale Drive motor: 5.5kW with automatic motor brake Tersa 4-knife cutterhead, knives on one side still new Planed cast iron tables, total length approx. 3060mm Slotted table lips Low-noise design Tilting fence with foldable auxiliary fence Suvamatic cutterhead guard Extraction port: 140mm Emergency stop Original paint, only a few spots touched up V-belt replaced CE mark Dimensions approx. 3060 x 1000 x 1100mm (LxWxH). Weight approx. 1100kg. The machine can be demonstrated on-site by prior appointment. We only offer machines that are ready for demonstration in our warehouse – see 'other offers from this supplier.'

Condition: used, LATHE FOR TABLE LEGS GENINI MOG. G300 - Max.turning diam. 300 mm. - Max. Turning lenght mm. 800 Kfsdpfxsmzbp Es Ah Uja - N. 4 carriages

Condition: excellent (used), Catalogue number 7797 TECHNICAL DATA - Shaft width: 510 mm - Number of knives: 3 pcs - Table length: 2520 mm - Brake - Cast iron tables - Both tables adjustable - Original angle-adjustable fence - Motor: 4 kW - Extraction port diameter: 160 mm - Dimensions (L/W/H): 2520x870x950 mm - Weight: 672 kg ADVANTAGES – Polish production – 3-knife cutterhead – Brake Kfedpfext Ii Rox Ah Usa – Used jointer, in very good condition Net price: 7,500 PLN Net price: 1,790 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, pressing force: 90 t, cylinder diameter: 85 mm, stroke length: 350 mm, number of cylinders: 6, TECHNICAL DETAILS Electric heating plates: 3,000 x 1,300 mm Number of heating plates: 2 pcs. Total pressing force: 90 t Cylinder stroke: 350 mm Number of levels: 1 pc. Level opening: 350 mm Press cylinders: 6 pcs. Diameter of press cylinders: 85 mm Kfedpfxjxnyqps Ah Uea MACHINE DETAILS Working temperature: 90°C Max. temperature: 120°C Electrical data Operating voltage: 400 V/50 Hz Connected load: 22 kW Heating capacity: 22 kW Power requirement hydraulic unit: 3 kW EQUIPMENT Movement of the press table via rack-and-pinion and parallel guides Electronic control unit with touchscreen Digital timer for setting pressing time Digital input and monitoring of pressing pressure Digital diagnostics and fault message display Safety circuit with two-hand operation Safety pull-cord Safety support for lower press table EFC electronic flatness control Gold anodized heating plates (Busse) Note: Dismantling and loading can be offered for approx. €1,200 net.