CENTAURO T3-1300 hydraulic copying lathe

Centauro t3 1300

Year of construction: 2000, condition: good (used), Barberan laminating line all inquiries should be directed to the number 790800714 line in continuous operation maximum lamination width - 1300mm Nlsdeilqvrjpfx Aazjg min. gr. 3mm max. thickness 40mm maximum length of elements 2800 mm minimum length approximately 600 mm smooth speed control from the brushing machine, maximum speed 20 m / min. the line includes - automatic loading of Tommassini (out of order) - brushing machine up and down - heating lamps in front of glue rollers up and down - PVAC glue applicator - top-down drying lamps - a line of steel calenders for pressing - in addition, the line has a purchased crowning machine for the upper surface (working) - can be laminated on one side with PP foils

Condition: used, Year of construction: 2022, Edge bander for narrow surfaces + XES200 station Manufacturer: HOMAG Type: EDGETEQ S-500 KAL375 AT Year: 2022 + XES200 station designed for servicing a PUR adhesive system using airTec technology Control: HOMAG powerControl PC23 with powerTouch screen Equipment: pre-milling unit, glue application unit, airTec technology, trimming units, milling units, rounding units, sanding units, Nlodpfx Aaozkmqzezeg polishing units. Additional equipment: HOMAG XES 200 service station.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control Njdpfx Aaeztpw Nezjlg - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, machine/vehicle number: 008503, Max. panel width: 4300 mm Max. panel length: 4300 mm Main saw blade projection: 80 mm Nledpfxjy Hcd Es Aazjg No of Grippers: 8

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Nodpswuz Ekjfx Aazjlg Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: used, Year of construction: 2010, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 2010, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Nledpfx Aajv Sthgszog Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 2,200 mm, travel distance Y-axis: 2,900 mm, travel distance Z-axis: 450 mm, overall weight: 2,500 kg, controller model: XINJE, feed length X-axis: 2,100 mm, feed length Y-axis: 2,800 mm, feed length Z-axis: 300 mm, spindle motor power: 9,000 W, rapid traverse Z-axis: 20 m/min, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, spindle speed (max.): 24,000 rpm, control type: NC control, Danibrum ROD Line CNC Router – Complete Industrial Solution for Precision Nesting The Danibrum ROD Line CNC Router is a professional-grade machine, designed for large factories and industrial manufacturers who demand efficiency, reliability, and high-precision machining. Built for nesting and panel cutting operations on chipboard, MDF, and solid wood, the ROD Line provides a robust, configurable platform ideal for automated production environments. Optimized Working Area for Industrial-Scale Production The standard working area of 2100 x 3000 mm allows for the processing of large panels without repositioning. The welded steel frame ensures structural rigidity, while HIWIN linear guides guarantee smooth, stable, and precise motion. Powerful Motor and Automatic Tool Change Equipped with a 9 kW spindle motor and a 12-position automatic tool changer, the ROD Line enables the seamless execution of complex tasks such as contour cutting, grooving, milling, and drilling — all in a single uninterrupted cycle. Industrial-Grade Speed and Accuracy The X-Y axis transmission features helical rack and pinion drives, while the Z axis employs a TBI ball screw for sub-0.01 mm repeatability. With a top travel speed of 80 m/min on X and Y, this router is engineered for high-output production cycles. Intuitive CNC Control and Broad Software Compatibility The machine is powered by the NC Studio control system, running on Windows OS, and is compatible with industry-standard CAM/CAD software such as Type3, ArtCAM, and Fusion360. The user interface is simple yet professional, supporting high-level production workflows. Optional Automation Features For automated production lines, the ROD Line can be optionally equipped with an automatic loading/unloading table — significantly reducing handling time and increasing operational throughput. Versatility and Custom Configuration The router offers customizable working dimensions, making it highly adaptable to various production layouts. It efficiently processes melamine-faced chipboard, MDF, solid wood, and composite materials. Key Advantages Heavy-duty industrial build for intensive operation High precision and excellent surface finish Nlodpfxjwpttps Aazeg Automatic tool change system for efficiency Extensive software compatibility Optional integration with automated production lines The Danibrum ROD Line CNC Router is a critical step toward the digital transformation and industrial optimization of wood processing. It is the complete solution for workshops and factories aiming for high performance, reliability, and flexibility in line with modern market demands.

Condition: used, machine/vehicle number: 008588, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm No of Grippers: 9 Nsdpsy In Avofx Aazelg Thin sheet loading: yes

Condition: used, Year of construction: 2023, operating hours: 489 h, Homag EDGETEQ 300 The machine will be available from approximately the end of December 2026. For further information about the machine, please see the images or feel free to request it. Nedpfx Aajz D U A Ajzjlg

Condition: used, Atlas Copco GA 118 Rotary screw compressor Nljdpfx Aajzz Rm Uszog