Internal threading machine

CMA RE 16 / RE 24 elektrisch

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Number of Drilling Units 1 Vertical Motor Power 22 kW Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Nedpfx Aaogbfaxezewl Maximum material weight 760 kg Max. Max. Drilling Capacity (mm) Ø40 mm

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. Nodpsv Sa I Tofx Aazowl In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type WIG welding machine for direct current DC Serial no. 184548, year of manufacture approx. 1994 Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space requirement L x W x H: 850 x 480 x 740 mm Weight: approx. 150 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise in good condition. Nsdpfjdzqb Eex Aazjwl

Condition: excellent (used), Year of construction: 2018, total length: 9,800 mm, total width: 4,000 mm, feed length X-axis: 3,500 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 1,100 mm, feed rate X-axis: 30,000 m/min, feed rate Z-axis: 5,000 m/min, table length: 3,000 mm, table load: 6,000 kg, table width: 1,200 mm, power: 22 kW (29.91 HP), Surface grinder Ziersch - Z1030 MACH-ID 9597 Make: Ziersch Type: Z1030 Control: Mitsubishi Touch Year: 2018 X - Travel: 3500mm Y - Travel: 1100mm Nwodpfx Asy En Dneazsl Z - Travel: 1100mm Table Length: 3000mm Table Width: 1200mm Table load: 6000 Feed rate X-Axis: 30000mm/min. Feed rate Z-Axis: 5000mm/min. Grinding stone dimensions:500 x 100 x 203mm Power: 22kW Speeds: 3000Rpm Cooling system: yes Feed rate Y-Axis: 3000mm/min. Length: 9800mm Width: 4000mm Height: 4500mm Weight: 27500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2021, operating hours: 3,000 h, travel distance X-axis: 6,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 950 mm, CNC Travelling Column Milling Machine – Fully Retrofitted by REM (2021) Powerful and versatile heavy-duty milling machine, completely modernized by REM specialists in 2021 with state-of-the-art Heidenhain TNC 320 control. Ready for immediate production use. KEY SPECIFICATIONS: • X-axis (transversal travel): 6,000 mm • Y-axis (vertical head travel): 2,000 mm • Z-axis (axial slide travel): 950 mm • Dual-spindle head | Head rotation: 360° • Spindle speed: 1,000 – 4,000 rpm • Spindle taper: ISO 50 (automatic locking/unlocking) • Head dimensions: 290 × 290 mm • Spindle motor power: 15 kW (DC) • Machine weight: approx. 32 tonnes Nwodpfxen D N H Te Aazjl • CNC Control: Heidenhain TNC 320 WHY BUY FROM REM? ✔ Machine fully inspected and tested in working conditions ✔ Modern CNC retrofit – new electrics, new drives ✔ Documentation and technical support available ✔ Export worldwide | Competitive shipping Ideal for heavy component machining in aerospace, energy, and heavy industry. Contact us today for full technical specifications, photos, and video demonstration.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, We offer you: CNC turning and milling center with robotic automation Manufacturer: DMG MORI Type: CLX 450 TC Year of construction: 2026 Control system: Celos X with Siemens Sinumerik One Technical data: Max. turning diameter: 400 mm Turning length: 1100 mm Bar capacity: max. 65 mm Travel paths: X-axis travel: 276 mm Z1-axis travel: 755 mm Z3-axis travel: 775 mm Y-axis travel: +/- 100 mm B-axis travel: +/- 120° Main spindle: Speed: 5,000 rpm Drive power: 14/17 kW Max. torque: 275/345 Nm Counter spindle: Speed: 5,000 rpm Drive power: 14/17 kW Max. torque: 275/345 Nm Milling spindle: Speed: 0 – 12,000 rpm Drive power: 8.8/10.5 kW Tool interface: HSK-T 63 Tool changer: 60 positions Max. torque: 73/90 Nm Internal clamping device: Ø 67 mm Operating hours: approx. 1,130 h Spindle hours: approx. 280 h Technical features & accessories: - Absolute, direct linear scales in the X and Y axes - Double-circuit filter Nodpfxjz A Ay Tj Aazswl - Counter spindle ISM 65, A2-8, C-axis and hydraulic spindle brake - Hinged belt chip conveyor, incl. coolant tank - Chuck flushing device on the outside for the main and counter spindle - Coolant supply through the counter spindle - Coolant spray gun - Screen cleaning for the safety shield - Electronic handwheel (if available) - Alternating speed - Signal light, 4-color - Automatic work area door, electric - Electrical interface Robo2Go - Workpiece measuring probe, manufacturer Renishaw RMP40 (if available) - Tool measuring device, manufacturer Renishaw RP1 (if available) - Function for drill breakage detection for Renishaw RP1 - Linear scale for Z1-axis - Differential pressure monitoring 2.0 on the main and counter spindle - Tailstock function for the counter spindle, incl. foot switch - Coolant system 8/40 bar, consisting of: - Coolant tank 600 l - Pump pressure variable 8 – 40 bar - Belt filter system - Lifting pump with level monitoring - Mechanical oil mist separator - Protection Package - Technology cycle with dialogue-guided programming - Technology cycle for parting off the workpiece - 2x 3-jaw chuck, manufacturer Schunk ROTA THW3 265-81 - Loading and unloading system Robo2Go, consisting of: - Module 35 kg - Drawer storage incl. additional drawer - Accessories on request Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Changes and errors in the technical data and specifications, as well as prior sale, are reserved!

Condition: used, x-travel 800 mm y-travel 400 mm z-travel 300 mm digital readout Heidenhain Nwodjqpl Uuepfx Aazol table surface area 1000 x 520 mm turning speed range 40 x 2000 U/min spindle taper SK 40 total power requirement 2,2 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 1700 x 1600 x 1800 m

Condition: good (used), Code: 0749 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TT 3 1300 Automatic sanding machine for worktops, furniture, panels, tables Technical data: Working width mm 1300 Max working thickness mm 130 Min working thickness mm 1 Composition: 1° Transversal belt - Motor Hp 15 - Electronic speed variator with display 2° Transversal belt - Motor Hp 15 - Electronic speed variator with display Transversal sanding belt size mm 1350 x 150 Chevron belt size mm 5510 x 140 Belt blowers Belt feed speed mt/min 5/25 Fixed table and mobile head for on-line set-up Panel cleaning rotary blowers Vacuum table Belt cleaning brush Infeed roller conveyor Nwjdpoh T Dzqjfx Aazel Installed power Kw 32 Compressed air 7 Atm Suction inlets: n° 2 diameter mm 200 - n° 2 diameter mm 150 - n° 2 diameter mm 100 Overall dimensions mmm 4400 x 2500 x 1600 h Weight kg 5000

Year of construction: 2019, condition: new, Powder coating system Mini – for beginners The Spark / ROMER® powder coating system Mini consists of: Powder oven SLS-9 small (Internal dimensions: 1200x1400x1200mm - without transport system) Powder booth KPZ-2 Delivery time: approximately 12 to 16 weeks after the order Shipping costs will be calculated individually. (Self-collection is also possible) To provide you with a detailed offer for a system tailored to your specific application, we require further details regarding the application and batch size. We will then promptly prepare an offer for a suitable system with the dimensions you require. Nwedpfoctx Irox Aazel Payment terms: 30% down payment and the remaining 70% upon notification of shipping readiness.

Condition: new, Year of construction: 2026, Sheet metal folder directly from polish manufacturer Prod-Masz. Plate Bending Machine ZGR-2000T/0,8 incl. wheels Nedpjc Rtv Tofx Aazewl Technical data: Maximum working length: 2140 mm max. sheet metal thickness: 0,8 mm (steel) Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,2 mm Cooper plate 1,2 mm Max. bending angle: 145 degrees cutting with rotary shears on the whole working length max. bending edge: 15 mm Protractor, tapping angle Weight: 180 kg Rotary shears (max. plate gauge to 0,8 mm / steel) + 350 Euro The machine have certificate CE and 12 months of warranty Shipping costs: its dependent on destination point ONLY SHIPPING IS POSSIBLE Price: 1.350,00 Euro ( VAT excl. ) We provide invoices with 0% of tax.