Condition: excellent (used), Vertex pneumatic tapping machine on articulating arm. Mounted to table 1800 x 900mm area. Kedpey Tl Rbsfx Al Nslu

Condition: good (used), Year of construction: 2002, functionality: fully functional, Pressing force: 10 t Workpiece diameter - max.: 2-50 mm Control system: SIEMENS SIMATIC Total power consumption: 12 kW Machine weight (approx.): 2.5 t Dimensions L x W x H: 1300 x 1500 x 1600 mm Roller stroke: 80 mm Klsdpfozd Dibox Al Nou Smallest/largest center distance between roller spindles: 117/197 mm Roller spindle height above machine bed: 160 mm Max. tool diameter: 175 mm Roller spindle mounting diameter: 54 mm Roller spindle mounting length: 75 mm Swiveling angle of roller spindle: -/+ 10 degrees Roller spindle speed (variable): 10-100 rpm Motor for roller spindle drive: 7.5 kW Accessories: several thread rolling tool sets

Condition: excellent (used), Thread cutting head Kjdjg Sif Uepfx Al Nslu self-opening Make Akon Type Rubometic Type D cutting capacity M6 - M 20 shank diameter 40 mm

Year of construction: 2014, condition: excellent (used), Tap Make Emuge HSS - NE 2 M 80 x 3 Ksdpfx Aefhdwpol Nelu

Condition: excellent (used), Tap for pipe thread Make May Type : R 3 3/4 inch Total length 185 mm Klsdpfx Aljfhdwqj Neu

Condition: excellent (used), Tapping attachment Efem No.1 for internal thread Mounting MK 2 Tapping head Adjustable slip clutch Thread M3 - M10 Kjdpstqlq Eofx Al Nolu Mechanical condition very good optically there are traces of storage

Condition: excellent (used), Tapping attachment Make EFEM Size 0 (28548) Spindle holder MK 1 Tap M1-M 4 Kodpfsuf Ru Eox Al Nelu right -left run automatic

Condition: excellent (used), Tapping attachment Type Efem MK 3 (28520) Shank diameter on tap 21 mm Automatic right - left run Total length 285 mm Ksdpfxet R S Avj Al Nolu Diameter 109 mm Weight 7.5 kg

Year of construction: 1985, condition: repair required (used), Extraction machine for taps -Handover in the current condition as seen -Current consumption: too high, machine as spare parts carrier Kjdpfxsi Huvhs Al Njlu -Manufacturer: Electro ARC, extraction machine for taps or similar tools -Clamping table: 660 x 460 mm -Outreach: 250 to 480 mm -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm -Weight: 402 kg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, ORT Italia Netting Machine CE certified Type RP 18/U Year 2012 Siemens SIMATIC OP17 CNC control panel Kjdozb Imaepfx Al Njlu Reference: F24

Condition: like new (used), Tapping dies R 2 for GA 4 Klodpeivzckofx Al Nju Tapping dies for Georg Fischer GA 4 tapping machine as new GF Art. 012209

Condition: good (used), Year of construction: 1973, pressure 0,5 - 10 t max. workpiece diameter 2 - 50 mm threading length 2000 mm pitch in mm 3 mm diameter of roll spindle taper 54 tool diameter 145 mm roll spindle turning speed range 41 - 129 U/min stroke 0 - 8 mm total power requirement 4,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 1,3 x 1,2 x 1,2 m Kodpfx Aszd Hhasl Njlu

Year of construction: 1968, condition: good (used), 1 used thread whirling machine for lathes make Burgsmüller type L 2 Klsdepit Afopfx Al Nsu serial number 68/1724

Condition: good (used), Year of construction: 2008, 1 used profile ring rolling machine Kledpfxjyurx Tj Al Nou Make: Profiroll Bad Düben Model: URWA 250 Year of manufacture: 2008 Technical data: Control: SINUMERIK 840 D Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100–700 rpm Drive power: 110 kW Mandrel diameter: 45–100 mm Length: 2,600 mm Width: 2,600 mm Height: 2,600 mm Weight: 12.5 t Scope of delivery: Centralized lubrication Infinitely variable speeds Proportional measuring system Linear mandrel guide Mandrel run-out monitoring Process data management Rolling equipment: Feeder: 130–190 mm / W 46–80 mm Magazine: 130–190 mm Measuring head Separate cooling unit Electronic setup assistance Process visualization Ring stopper and turning device for rotating the rolled part

Condition: used, Year of construction: 1985, thread dia. 254 mm grinding length 350 mm thread pitch 51 mm Control SIEMENS S 8 total power requirement 12 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m B A H M Ü L L E R Automatic Internal Thread Grinding Machine Model IPE 12 i.S. Year 1985 Serial No. 103174 _____ workpiece Ø, max. 300 mm workpiece length, approx. 350 mm height of centers (WP spindle/grinding spindle) 300 mm table stroke approx. 450 mm thread diameter ground max. approx. 254 mm thread diameter ground min. approx. 25,4 mm Ksdpfx Alst Hw U Ao Njlu thread length ground in one setting max. 250 mm Lead range, max. 51 mm Lead angle max. 10 ° Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 5,000 kg Accessories / Special Features * This is a programme controlled (SIEMENS S 8) internal thread and internal worm grinding machine , suitable for the grinding of ball screw nuts. * All movements are controlled by the SIEMENS programme control * Automatic infeed for grinding depth. * Automatic diamond roll profile dressing device, motorized by hydraulic motor,and device can be swivelled and mechanically adjusted lengthwise. * FISCHER Internal grinding spindle up to 30.000 rpm with oil and air lubrication and with Infinitely variable grinding spindle speeds. • 4-jaws chuck approx.. Ø 250 mm * Separate switch cabinet, separate hydraulic unit, oil drip pan, etc. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1986, workpiece diameter 460 mm threading length 900 mm thread pitch 100 mm Kodpfxst H Smte Al Nolu total power requirement 10 kW weight of the machine ca. 8 t dimensions of the machine ca. m

Condition: used, Year of construction: 2001, pressure 0,2-40 t max. workpiece diameter 70 mm threading length 120 mm Control total power requirement 29 kW weight of the machine ca. 9,5 t Kodet Hw N Tjpfx Al Nelu dimensions of the machine ca. m

Condition: used, Year of construction: 1991, workpiece diameter 30 mm threading length 110 mm thread pitch 0,5-2,75 mm/GG total power requirement 4,5 kW weight of the machine ca. 1,7 t Klodot Hwzcspfx Al Nju dimensions of the machine ca. m

Year of construction: 1985, condition: used, workpiece diameter 50 mm threading length 100 mm thread pitch mm total power requirement 1 kW weight of the machine ca. 1500 kg dimensions of the machine ca. m Kodst Hwn Njpfx Al Nelu

Year of construction: 1985, condition: used, workpiece diameter 25-90 mm threading length 3000 mm thread pitch 2-16 mm total power requirement 25 kW Klodstzdyzjpfx Al Nou weight of the machine ca. 10,5 t dimensions of the machine ca. m

Condition: new, thread dia. bis M 36 turning speeds max. 150 U/min thread M5 - M36 working area 2050 Rmax. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 4.0 kW Klsdoy Umd Eopfx Al Nju weight - pallet system 320 kg equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 . M27 / M30 / M33 / M36 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert

Condition: new, thread dia. bis M 24 turning speeds max. 280 U/min thread M5 - M24 working area 2050 Rmax. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 3.0 kW weight - pallet system 280 kg Equipment: Klsdpfey Umdlex Al Nju - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert

Condition: good (used), Year of construction: 1990, Thread cutting machines with accessories Kjdpfxjvk D Rpj Al Nslu Manufacturer SONE Type: 2000 . 230V .

Condition: reconditioned (used), workpiece diameter (max.): 60 mm, roll diameter: 185 mm, roll width: 150 mm, One - Reconditioned ORT Model RP18 - 18 ton Hydraulic Thread Rolling Machine with fixed rolling spindles for in-feed rolling or thru -feed rolling with helical thru-feed dies. Including new rolling spindles , new bearings and new worm gears & shafts etc Klodpfx Aloyml Ekj Nou Max rolling dia: 60mm - Max rolling width with in-feed dies: 150mm - Max rolling width with thru-feed dies: infinite Spindle diameter : 69.85mm - Power of main motor: 7.5kw Photographs taken before reconditioning

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: Kljdpfx Aev T Truel Nsu - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters