CME FU-3 CM

CME FU-3 CM

Condition: good (used), Year of construction: 2003, Ref. -No.: 10618 Manufacturer: KELLENBERGER Type: 600 U Nr. 33 Year of construction: 2003 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Switzerland Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Nodpfx Afjya Dagewjda Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500 / 1700 / 2200 / 3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400 / 10-400 Max. Grinding length: 900 mm Further information: The machine can be viewed while powered up.

Condition: excellent (used), Year of construction: 1988, TECHNICAL DATA. Max. clamping length: 90 mm Tool clamping height with tapered shank: 50 mm Tool clamping height with straight shank: 45 mm Max. helix angle: 45° Number of clamping positions: 1 to 99 Max. slide travel: 550 mm Max. grinding wheel diameter: 350 mm Min. grinding wheel diameter: 150 mm Grinding wheel speed (variable): up to 2700 rpm Swivel range of grinding spindle axis: 0° to 15° Grinding slide feed rate (variable): 0.05 to 16 mm/min (with 3rd and 4th axis: 0.05 to 8 mm/min) Workpiece spindle taper: ISO Taper No. 40 Grinding Wheel Data Ndjdpfxjwwkace Afwea CBN and diamond cup grinding wheel: Ø200 mm → Min. DFF: 66 (3rd axis), 76 (4th axis) Ø250 mm → Min. DFF: 16 (3rd axis), 26 (4th axis) CBN-ES cone grinding wheel: Ø200 mm → Min. DFF: 50 (3rd axis), 60 (4th axis) Ø250 mm → Min. DFF: 0 (3rd axis), 10 (4th axis)

Condition: good (used), machine/vehicle number: 630, with a swiveling (pivoting) vertical head Table size: 300 x 1,430 mm Table travels: longitudinal (X-axis) 1,000 mm vertical (Z-axis) 520 mm transverse (Y-axis) 360 mm Njdpfx Aobq Rugofweda Installation height under the milling spindle approx. 500 mm Overhang of the milling spindle min./max. 350 mm Spindle mount: SK 40 Spindle speeds: 25 - 1,200 rpm Feed rate/rapid traverse: 12-900 mm/min Spindle drive: approx. 3 kW Total drive: 3.4 kW - 380 V - 50 Hz Weight: 2,400 kg

Condition: excellent (used), Year of construction: 2000, turning length: 2,000 mm, spindle bore: 105 mm, spindle motor power: 21,000 W, total height: 2,100 mm, total length: 4,500 mm, total width: 2,000 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, turning diameter over bed slide: 620 mm, workpiece weight (max.): 2,500 kg, overall weight: 7,800 kg, Very little hours Hydraulic tailstock CE Safety doors Multi Fix Tool holders system  D1 Chip conveyor Swing over bed Ø: 620mm Swing over cross slide Ø:370mm DBC Turning Length: 2000mm Spindle bore: 105mm Spindle power: 21kW Tailstock spindle Ø: 100Ø Stroke pinole: 200mm Spindle taper: 6Mk Workpiece weight: 2500 Speeds / ranges: 1600Rpm Nedeyuchrspfx Afwoda Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Length: 4500mm Width: 2000mm Height: 2100mm Weight: 7800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2006, Control unit MANUAL PLUS 4110 Nsdpfxex Tg T Ro Afwsda

Year of construction: 2003, condition: ready for operation (used), Swing diameter over bed/cross slide: 320mm/150mm, center height: 160mm, distance between centers: 750mm, max. turning length: 740mm, travel X/Z: 185mm/700mm, chuck diameter: 200mm, speed: 4000rpm, rapid traverse X/Z: 5m/10m/min, tool stations: 8, tailstock quill stroke: 120mm, tailstock quill diameter: 60mm, machine dimensions X/Y/Z: approx. 2300mm/1500mm/1700mm, weight: approx. 2000kg, control: Heidenhain. Documentation available. An on-site inspection is possible. Nedpezdum Dofx Afwoda

Condition: excellent (used), Year of construction: 1982, KLINGELNBERG SNC 30 GRINDER Brand: Klingelnberg Model: SNC 30 Type: Industrial grinder Year: 1982 Nodsy S Akpspfx Afwoda Serial number: 3837 FEATURES: – Complete machine – Hydraulic unit and filtration system included – Heavy-duty industrial installation – Precision machine – Equipment visible in the photos

Condition: used, x-travel 600 mm y-travel 400 mm z-travel 400 mm table surface area 720 x 410 mm Njdpfoy It S Nsx Afwoda spindle turning speed range 40 - 2000 U/min tool taper SK 40 total power requirement 3,0 kW weight of the machine ca. 1,4 t dimensions 1,8 x 1,6 x 1,9 m Milling machine with - Toolmaker's table - Heidenhain digital readout - Rapid traverse - Coolant system - Central lubrication - Machine feet - incl. drawer unit with contents

Condition: good (used), Year of construction: 2011, functionality: fully functional, Saeilo Dialog H 66 Control: Siemens 840DSL with ShopTurn Swing diameter over bed: 600 mm Ndjdpey D I Hmjfx Afwoa Centre distance: 2,000 mm Turning length: 1,980 mm Gear stages: 2 Spindle bore: 105 mm Spindle speed: 2,500 rpm Power: 18.5 kW

Condition: used, Year of construction: 2010, turning diameter 475 mm turning length 1500 mm control Fagor 8055T Revolver 8 turning diameter over slide 240 mm turning dia. in gap 710 mm length of gap 350 mm spindle passage 51 mm turning speeds 100-4500 U/min Power 7/11 KW 3-jaw chuck 250 mm steady 230 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Ndedpfeyqv S Nsx Afwea About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team