Machining center

CNC bewerkingsmachine DMA 1532 Nesting

Condition: like new (used), Year of construction: 2017, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,200 mm, table length: 3,500 mm, table width: 1,750 mm, spindle speed (min.): 24,000 rpm, Heidenhain iTNC 530 control Main spindle HSK-A 63 Hedpfxjw S T Iqe Agpjfp Speeds: 1-24,000 rpm Tool changer for 50 tools Through-spindle cooling 5-axis milling machine with simultaneous milling head (Gabelkopf)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, A used CNC portal milling machine with a C-axis for turning (CNC turning, CNC milling and angle head machining). Boring machine machining! Hirth gearing! TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Table diameter: 2,500 mm Max. turning diameter: 3,000 mm Max: turning height: 1,000 mm Machine: Uniport 6000 Boring machine work, also CNC turning, CNC milling and angle head machining. All in one clamping, combined with the speed and precision of a CNC portal milling machine. TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Dimensions Table diameter: 2,500 mm & 2,000 mm Hfjdpovvh R Dsfx Agpjp Max. turning diameter: 3,000 mm & 2,500 mm Max: turning height: 1,000 mm C-axis for turning New price: €1.8 million Dismantling: by arrangement The machine comes with a protective cover so that no chips get into the Hirth gearing on the slide during milling. Then there is the turning attachment head for the turning tools and an angle head for lateral machining on the plate field or on the rotary table. You can swivel this over the Hirth gearing by 2.5° each. All holders (milling, turning, angle head) are clamped using HSK-100. The machine comes with a radio probe from M&H (Hexagon) for measuring and zero point probing.   The machine is in operation and can be inspected on site. A video of the machine is available.

Condition: new, Year of construction: 2024, operating hours: 50 h, machine/vehicle number: 305, Available: February 2023 Control: Osai X-axis: approx. 3,100 mm Hsdpswwq Hcefx Agpefp Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with T-slots across every 250 mm Max load: 1000kg distributed over the entire surface 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 min-1 Torque: 15.3 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blowing air / MMS: outside Drives linear axes Feed speed X and Y axes: up to 50 m/min Z-axis feed rate: up to 30 m/min Color Housing, portal, control cabinet: light gray Z-slider and milling head: orange Additional equipment - 15-way tool changer - Control in a separate, rollable desk

Condition: good (used), Year of construction: 2017, operating hours: 9,380 h, functionality: fully functional, machine/vehicle number: 4455, Numerically controlled machining center max. panel sizes: 4,000 x 2,300 mm 1 Kuka KR420R3300 robot 1 Kuka KR200L140 robot 1 Kuka KRL140-3Comp robot Conveyor belt for removing the scrap metal Suction Ruwac Zone 22 Hedpfxsr E D Eao Agpsfp

Condition: used, Year of construction: 2018, functionality: fully functional, X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ±110° C-axis: ±360° Control unit: Heidenhain TNC 640 with HR 520 handwheel Clamping table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with transverse T-slots at 250 mm intervals Max load: 1,000 kg evenly distributed across the entire surface 2-axis milling head ST8 Spindle power: 15 kW Spindle speed: max. 24,000 rpm Torque: 20.9 Nm Hfsdexm Tv Aepfx Agpop Tool holder: HSK 63F Tool release: pneumatic Blow air: external Linear axis drives Feed rate X and Y axes: up to 60 m/min Feed rate Z axis: up to 40 m/min Accuracies Positioning accuracy: 0.10 mm Repeatability: 0.05 mm Colour Enclosure, gantry, control cabinet: light grey Z-carriage and milling head: blue Additional equipment - 15-position tool changer - Oriented milling spindle (e.g. for thread cutting) - Direct path measuring system on all 5 axes - Double-sided enclosure - Heidenhain TT140 (optional, at extra cost) - Heidenhain TS260 (optional, at extra cost) - 3D machine model (optional, at extra cost) Machine condition Fully functional, immediately available, still under power until November 2025