Collin press

Collin P200P

Condition: good (used), Year of construction: 2001, - Manufacturer: IDE - Type: 45/4 - Year of manufacture: 2001 - Monovis Ø45mm 25LD Nodpouhpiyofx Agyslc - Right-hand analog control - Screw profile: PVC - 4 heating zones on cylinder - 4 tool heating zones - Motor power: 8.5kW - Up to 60kg/h Good overall condition, very clean machine

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Nledjuiykdopfx Agyec

Year of construction: 2024, condition: new, Demag Panel NC3 Made in Germany width-30CM height-5CM length-50CM TYPE: 6EJ5 Njdpjqvuigofx Agyslc 398-0DE14 Demag spare part panel

Year of construction: 1993, operating hours: 104,599 h, condition: good (used), Brand Cincinnati Milacron Austria GmbH Type CMT 35 Nedpovl Hzgefx Agyslc Machine number 2005723/10 Type Screw Conical Double Screw Year of manufacturing 1993 Machine hours 104,599 hours Screw Diameter 35mm Dimensions (LxWxH) 3200 x 1500 x 1720 mm Weight (approx) 2000kg

Year of construction: 1999, operating hours: 16,484 h, condition: good (used), Brand: Collin Lab & Pilot Solutions GmbH Extruder model: E 30 M Low Boy Nodpjyub Rlsfx Agyjlc Screw type: Single screw Screw diameter: 30 mm L/D ratio: 25 mm Operating hours: 16,484 h

Condition: excellent (used), Year of construction: 2009, operating hours: 35,808 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 204 cm³, injection pressure: 1,860 bar, injection weight: 186 g, Here we offer the following well-maintained used injection moulding machine as an injection moulding machine dealer: Of course, we also purchase well-maintained injection moulding machines from the 2010 model year onwards. We have been a wholesale dealer for injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial number: 61013142 Year of manufacture: 2009 Operating hours: 35,808 h Control system: MC 5 Fully functional Condition: very well maintained Machine comes from original German ownership xxxxx without robot / without temperature control unit xxxxx Extras: - Pneumatic needle shut-off nozzle - 1 pneumatic valve on BWAP - Pneumatic control for 1 hot runner - Pneumatic control for hot runner/cold runner - Reject chute - Nozzle guard door – ejector area safety door foldable - Euromap 18 interface on FWAP - Electrically actuated ejector plate in BWAP - Hydraulic auxiliary unit for core pulls - Injection-compression control - 2 x hydraulic core pulls (on BWAP and FWAP) - Pressure relief for core pulls on BWAP and FWAP - Water manifold, 8 circuits - 8 heating zones for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets, 2 x CEE 16A / 1 x CEE 32A - EUROMAP 67 signal interface for robot - Start-up sequence, quality assurance package, cycle time analysis, cycle memory, event protocol - BluePOWER package: energy consumption display - Graphics analysis package, trend chart - Interface for temperature control unit - Cycle time analysis, actual cycle time optimization Injection unit: Screw diameter: 40 mm Shot weight: 186 g / PS Injection pressure: 1,860 bar Shot volume: 204 cm³ Clamping unit: Clamping force: 80 t / 800 kN Tie bar spacing: 420 x 420 mm Platen size: 655 x 670 mm Mould installation height: 250 mm Max. platen gap: 750 mm Ejector stroke/force: 100 mm / 22 kN Clamping unit fully electric Nlsdpfx Aoyrd U Ujgyec Warranty: Warranty until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight charges Available from our warehouse in Hannover, Germany

Condition: good (used), Year of construction: 2015, Moretto XD2 TS Mini Dryer – Technical Parameters (copy-friendly) Drying temperature (max): 180 °C / 356 °F Air flow: 3–10 Nm³/h (1.7–5.9 cfm) Hopper capacity: 15 dm³ (0.53 cft) Material capacity (bulk density 0.65 kg/dm³): 9.7 kg (21.4 lb) Total power: 1 kW (1.3 HP) Average energy consumption at 80 °C: 0.062–0.206 kWh Average energy consumption at 176 °F: 0.083–0.276 HP/h Power supply: 230 V / 1 phase / 50 Hz Dimensions & weight A: 409 mm B: 334 mm H: 591 mm H1: 556 mm d: Ø 9 mm D: Ø 50 mm F1: 180 mm d1 (mounting): 4 × M6 Nledpfx Ageyfhyusyec I: 100 mm F: 120 mm Weight: 13 kg

Condition: good (used), Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator -Manufacturer: MS ULTRASONIC, ultrasonic generator sonxGEN ADVANCED 20 -Type: 20 ADVANCED .: 7001480 -Power: 2.75 kVA -Number: 1x generator available -Dimensions: 360/100/H250 mm -Weight: 8.5 kg Nlsdpfjxpfa Ssx Agyjc