Used D Andrea for sale (45,304)

Condition: like new (used), Year of construction: 2017, operating hours: 280 h, functionality: fully functional, machine/vehicle number: CR751, input voltage: 400 V, type of input current: three-phase, number of axes: 6, Equipment: documentation/manual, TECHNICAL DETAILS Gedpfs Ahn Efox Akhskd Number of axes: 6 MACHINE DETAILS Robot controller: Mitsubishi MELFA Input voltage: 400 V Type of current: Three-phase Operating hours: 280 h EQUIPMENT Original Mitsubishi robot controller Teach pendant / programming handheld device Software and programming equipment Robot connection cable and accessories Vacuum gripper Complete robot system Low operating hours, not used in continuous series production Documentation/manual

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL INFORMATION Manufacturer: Eisele Type: LMS III-D Machine number: 3.028 Year of manufacture: 1975 Machine type: Metal circular saw ELECTRICAL DATA Operating voltage: 220–380 V DRIVE Speed: up to 2,800 rpm TOOL Grinding wheel diameter: 250 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Godpfx As Aduyhjkhokd Length: 700 mm Width: 500 mm Height: 1,000 mm Weight: 150 kg

Condition: used, Year of construction: 2003, machine/vehicle number: 729.723.01, MACHINE DETAILS Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Rated operating current: 165 A Incoming feed line protection: 200 A Microcut Motor power: 90 kW Rated current: 158 A Mixing screw Motor power: 2.2 kW Rated current: 5.20 A MC screw Motor power: 4.0 kW Rated current: 8.80 A Conveyor screw Motor power: 3.0 kW Rated current: 6.80 A Agitator, buffer tank Motor power: 1.5 kW Rated current: 3.60 A Note: Further technical data can be found in the attached document. Gksdpfxs Ahgike Akhjd

Condition: used, machine/vehicle number: H2X392V01704, Year of construction: 2019, operating hours: 7,035 h, load capacity: 2,000 kg, lifting height: 4,250 mm, mast type: duplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,250 mm Load capacity: 2,000 kg Fork length: 1,200 mm MACHINE DETAILS Mast type: Duplex mast Drive type: Diesel Dimensions & Weight Dimensions (L x W x H): 4,100 x 1,200 x 2,777 mm Own weight: 3,740 kg Next service due in: 878 hours UVV certificate valid until: 03/2027 Operating hours: 7,035 hours EQUIPMENT Full cabin Gsdpfj Ahraqex Akhskd Heater Windshield wiper Road traffic lighting with turn signals LED work light, front LED work light, rear Orange warning light Safety light, rear Comfort seat Lumbar support Seat heating Former Linde full-service unit Side shifter 3rd hydraulic valve: Available 4th additional hydraulic valve: Available, free for fork positioner All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 216

Condition: ready for operation (used), D'Andrea T100 Planing and Turning Head for Fehlmann SF32 Head diameter: 102mm Radial adjustment of the tool slide: 30mm Max. planing diameter: 200mm Max. speed: 1500 rpm Accuracy: 0.005 mm Net weight: 4.6 kg Tool holder: SF 32 Fehlmann You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is available. Gjdpfxez H Iz Do Akhokd Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: used, Andreas Schmid Climate and temperature test chamber KK 7.200/-50/180S 7,200-liter test chamber / Year of manufacture: 2016 Temperature and humidity tests Used climate chamber with a separate air-cooled Güntner condenser. Technical data: Manufacturer: Andreas Schmid Anlagentechnik GmbH Type: KK 7.200/-50/180S Year of manufacture: 2016 Test chamber volume: 7,200 liters Temperature specifications according to the manufacturer: Temperature control system: -50 °C to +180 °C Previously used for tests on active batteries. Air Liquide gas supply and pressure regulating unit: Completely mounted in a metal cabinet. Pressure regulator, pressure gauge, shut-off and flush valves, as well as pipelines and connecting hoses. All components installed on a common mounting plate in the cabinet. Climate range: +10 °C to +95 °C Humidity range: 10 % to 95 % RH According to the manufacturer's climate diagram Steam humidifier: 8 kg/h Heating: 5.0 K/min (-20 to +120 °C) Cooling: 5.0 K/min (+120 to -20 °C) Without test load Heating power: 36 kW Air circulation: 3 fans / 8,000 m³/h Refrigerant: R404A / 55 kg Connection: 400 V / 3 phases / 50 Hz Max. current: 100 A Internal dimensions (W x D x H): 3,000 x 2,000 x 1,200 mm External dimensions: 3,300 x 3,200 x 2,500 mm With attachments: 3,600 x 3,300 x 3,100 mm Weight of chamber: 4,500 kg Empty weight of condenser: 460 kg Total weight: 4,960 kg without additional parts Equipment: V2A stainless steel interior Double-leaf door 2 heated viewing windows, each 600 x 500 mm 4 heated feedthroughs DN 150 Pressure equalization / Condensate drain Halogen lighting 200 W Program controller SE-702 STANGE ECS-2000-1 software on CD License documents and USB dongle available License rights not checked Güntner condenser, air-cooled: Type: GVV 090.2D/1-N(D).E Year of manufacture: 2016 Dimensions: 2,700 x 930 x 1,650 mm Application areas: Temperature and humidity tests Environmental simulation / Quality assurance Material and component testing Condition: Used Optical condition according to images Scope of supply: Andreas Schmid climate chamber Separate Güntner condenser 1 x Air Liquide gas control unit, completely mounted in a metal cabinet, with existing equipment as shown in the images STANGE CD, dongle, license documents Technical documentation as shown in the images Gkedpfx Ae Ai I T Tjkhjd Shipping by freight forwarder possible. Errors and prior sale excepted. We will be happy to answer any questions by phone.

Condition: used, Used Morton model FKM1200-D stainless steel ploughshare mixer/dryer. Has approximate total capacity of 1,200 litre with a working capacity (product dependent) of 480 to 840 litre. Unit has serrated ploughshare blades driven by Brook Crompton electric motor through a SEW Eurodrive gearbox. Unit includes external stainless steel jacket rated 5.5 bar design pressure at 163 deg. C. Unit has provision for 4 choppers but only 1 chopper currently fitted. Unit has stainless steel Morecroft Engineers stainless steel top-mounted feed hopper and Mitchell Dryers stainless steel jacketed dust filter. Includes centre bottom entry discharge port with flap valve. All mounted on stainless steel frame. Gksdpfx Aksz R R A Rshsd Specifications: Bowl Volume: 1,200 L Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Vacuum Internal (Y/N): N Jacket (Y/N): Y Jacket Pressure: 5.5 Bar Jacket Temperature: 163 deg.c.

Condition: used, Year of construction: 2013, Ashton Industrial model AIS-3350/XDIA D Refurb Edge Detection Unit/Arriser. Serial no: 8343 (2013) Gkodpfxo Afwwge Akhsd Location: These lots are located in Wellingborough, Northamptonshire, UK

Condition: not inspected (used), Year of construction: 2009, operating hours: 12,500 h, overall weight: 2,500 kg, power: 22 kW (29.91 HP), Used shredding machine designed as a twin-shaft shredder blade 30 mm drive 22 KW we currently have 4 used machines in stock with control system and partly installation frame and hopper. Gjdpfx Aksra A D Tjhekd

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, HÖFFMANN DÜBELFIX DBL Dowel and Slot Drilling Machine In very good condition, this machine comes from a small carpentry shop, and everything is in its original condition; it has only been cleaned. It can be used to mill slots and drill dowel holes on two levels without reclamping. 380V, 1500W Speed: 2850 rpm Year of manufacture: 1991 With this machine, you can mill slots for, e.g., lock boxes and similar items, and produce all types of frame dowel joints at right angles, butt joints, and miter joints. Ideal for the production of dowel joints in timber frame construction, furniture, door, window, and staircase construction, and for similar applications. Drilling on two levels, the grid and stops, and the machine's design allow dowel joints to be produced in a very short time, making the machine very economical. Gsdj Aiv T Hjpfx Akhskd The machine requires a compressed air connection of 6 bar (the air consumption is very low). Rotates clockwise. Mills and drills very well and cleanly. Comes with 2 angle stops integrated into the machine table and 2 additional stops on the left and right outside of the table. Additionally, you will receive a round stop rail, 2000mm long with a folding stop. This stop rail can be used on both sides, and when switching from one side to the other, the folding stop does not need to be readjusted. The workpiece is clamped using 2 pneumatic clamping cylinders, and the switches are located directly on the clamping cylinders. The height adjustment from one drilling level to another is also pneumatic; the pneumatic switch for this is located at the top of the adjustment lever for the grid. This ensures a quick adjustment of the grids and the drilling levels. Comes with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right. The 2 drilling levels each have a scale with a height indicator, making it easy, quick, and accurate to adjust the height of each drilling level. It can be quickly converted for slot milling; the machine can then be used without a grid with 2 adjustable stops on the left and right, and then has a working width of max. 320mm. The machine has a stop rail at the front of the machine table, which can be adjusted downwards if required. The max. drilling hole height is approx. 150mm. The max. drilling hole depth is approx. 120mm, with a drilling depth stop. The max. workpiece height is approx. 250mm. Everything is in perfect working order. We will personally deliver and demonstrate the machine throughout Germany for 220.00 euros, so you have no risk when buying. Delivery to Austria and the EU is also possible upon request. The machine table is 800mm wide and 250mm deep. Professional equipment, not cheap DIY junk. Comes with instructions. You can start working with the machine immediately. Comes with a 2-jaw drill chuck up to 20mm. Very stable and durable construction. The precision guides with play-free ball bearing bushes are in good condition and move smoothly. Very stable and rigid design.

Condition: excellent (used), axle configuration: 2 axles, first registration: 09/2003, total length: 11,240 mm, total width: 1,900 mm, wheelbase: 880 mm, color: other, = Additional options and accessories = - Spare tire = Remarks = Damages: none XL919629135075522 = More information = Year of construction: 2003 Empty weight: 4.900 kg Carrying capacity: 3.100 kg GVW: 8.000 kg Technical condition: very good Visual appearance: very good Price: On request Registration number: OH-15-HL = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Gedjynh Ikjpfx Akhekd Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: 1044, Diosna SP 120 D spiral mixer/kneading machine 32 Ah connection with 2-hour timer, 2 speeds on castors In excellent condition, operates quietly If you have any further questions, please contact us. Gkodpfx Ajdc Eh Ajkhod Thank you in advance.

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, type of input current: AC, input voltage: 400 V, D&K PROTEUS fully automated B1 laminating machine. Production speed: 35 m/min. Max sheet size: 760 x 1050mm. Gkedjz D Uanspfx Akhsd Min sheet size: 210 x 220mm. Stock range: 115 - 600gsm. Jogger delivery

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 9710-1987, input voltage: 380 V, year of last overhaul: 2026, input frequency: 50 Hz, used spiral mixer Diosna SP 120 D, overhauled, for 120 kg dough, 2 timers, stainless steel bowl, stainless steel spiral, newly painted, new electrics, new bearings, new V-belts Gede Ah If Hepfx Akhokd

Condition: used, Year of construction: 1979, operating hours: 13,655 h, overall weight: 13,500 kg, fuel type: diesel, color: red, power: 46 kW (62.54 HP), mileage: 1,001 km, first registration: 01/1979, empty load weight: 11,800 kg, maximum load weight: 1,700 kg, gearing type: automatic, axle configuration: 4x4, front tire size: 9.00-20, number of seats: 1, driver cabin: other, wheelbase: 2,500 mm, maximum speed: 20 km/h, Equipment: additional headlights, all wheel drive, Vehicle location: Bovenden, working lights, twin tires Wheelbase: 2500 mm Approx. 13655 operating hours! Air-cooled Deutz diesel engine type F 4 L 912! Godpfx Akovhh Nqehokd High-performance double pump with total output control! Steering axle with automatic oscillation lock! Hydraulic drive by variable speed drive motor with creep speed control! Loading length approx. 7400mm! Loading width approx. 2500mm! Loading height approx. 3000mm! Bucket available at extra charge! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, Year of construction: 2023, Manufacturer : Sesotec Model : Raycon D+ HX 1400 / 660 / 450 / 250 Year : 2023 Type: X-ray detector – X-ray inspection systems for food Product width: max: 450 mm Maximum product height: 250 mm Belt width: 660 mm Detection : 0.4 mm Capacity : 900 pcs/min Speed v = 0,32 -1,04 m/s Gkodpfxsy Abcro Akhjd X-ray Source : 40–100 kV / 2.0–5.0 mA (200 W) Weight : 585 kg Weight / conveyor : 111 kg

Condition: used, axle configuration: 2 axles, first registration: 11/2026, color: other, Year of construction: 1997 Empty weight: 6.960 kg Gkedpfx Ake Ai E Sxshsd Axle 1: left 10 mm right 10 mm Axle 2: left 10 mm right 10 mm Axle 3: left mm right mm

Condition: used, color: blue, Equipment: air conditioning, Year of construction: 2009 Operating hours: 14.744 Empty weight: 45.000 kg Gkedpfxj Agu U Ds Akhjd = Additional options and accessories = - Autoradio - Central lubrication = Remarks = Used Fuchs MHL360 D mobile material handler for sale at CHESS This Fuchs MHL360 D is equipped with a 6 cilinder turbo charged water cooled Deutz TCD 2013 L06 2V diesel engine (186kW). Machine is from 2009 and has 14.744 working hours on the service meter. Moreover the machine has 4 outriggers high rise cabin (elevatable and forward movable cab) camera system full rubber tires cabin steps etc. This Dutch machine comes from the first owner with full service history and books. Fuchs grab optional Fuchs MHL360 D in very nice condition with original paint ready for inspection at our yard. Please contact us for more information!

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). Gksdpfx Aszt Ai Eekhsd with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: good (used), Year of construction: 2001, operating hours: 20,900 h, functionality: fully functional, Channel baling press Paal Konti 275 D, year of manufacture 2001, with shredder and chain belt conveyor Paal KEM-1500, year of manufacture 2005 Technical data: Manufacturer Paal Type Paal Konti 275 D Year of manufacture 2001 Operating hours 20,900 as of 10/2026 Gkjdpo Afwy Hjfx Akhjd Pressing force 75 t Total connected load 106 kW Feed opening 1020 x 1550 mm Bale dimensions 750 x 1100 mm, length variable Tying 4-way automatic Throughput at 35 kg/m³ approx. 12 t/h 60 kg/m³ approx. 21 t/h 100 kg/m³ approx. 33 t/h Bale weight 500 to 750 kg Transport dimensions approx. 11152 x 2152 x 2800 mm (LxWxH) Machine weight approx. 25,000 kg Type Paal KEM-1500 Year of manufacture 2005 Drive power: 5.5 kW Conveyor speed: 0.29 m/s Nominal width 1500 mm Axle distance 17500 mm Length of feed belt: approx. 10000 mm Length of rising section: approx. 9000 mm Gooseneck: approx. 1000 mm Inclination angle: 28° Materials: Paper, cardboard, light waste, plastic waste Note: The press is currently still in operation. Dismantling is planned for December 2026. An inspection under operating conditions is possible. The complete documentation including the CE declaration is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offer is subject to change, prior sale is reserved and the offer can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment ex works, without any guarantee or warranty.

Condition: used, functionality: unexamined, total width: 120 mm, total length: 120 mm, total height: 120 mm, overall weight: 1 kg, Bender ISOMETER iso685-D-B Insulation Monitoring Device – B91067020 Insulation monitoring device for continuous monitoring of the insulation resistance in unearthed AC, DC, and AC/DC power supply systems. Manufacturer: Bender Product Series: ISOMETER Type: iso685-D-B Article Number: B91067020 Device Type: Insulation Monitoring Device Gjdpfxs Aia Dnj Akhokd Monitored Network System: IT systems (unearthed networks) Network Rated Voltage AC: 0–690 V Network Rated Voltage DC: 0–1000 V Network Rated Frequency: 1–460 Hz Supply Voltage AC: 24–240 V Supply Frequency: 50–400 Hz Supply Voltage DC: 24–240 V Measured Values: Insulation resistance, network voltage, network leakage capacitance, and frequency Measurement Method: Active AMPPlus measurement method Measurement Profiles: Predefined measurement profiles for different network conditions Display: Integrated high-resolution graphical LC display Operation: Integrated control elements Communication Interfaces: Ethernet and RS-485 Communication Protocols: Modbus TCP, Modbus RTU, BCOM, Bender Sensor Bus Web Server: Integrated History Memory: Available ISOnet Function: Available, for monitoring coupled IT systems Alarm: When set insulation limit values are undercut Remote Monitoring: Possible via network interface Extension of Voltage Range: Possible via external coupling devices Standard for Insulation Monitoring: IEC 61557-8 Application Areas: Industrial power supplies, converter systems, UPS systems, battery networks, and coupled IT systems.

Year of construction: 1981, condition: used, functionality: fully functional, Name: Ploughshare mixer Manufacturer: Lödige Type: FKM 1200 D Year built: 1981 Total content: 1200 Liter Speed: 120 Driving force: 18,5 kW Material: Titanium-stabilized stainless steel 1.4541 Motor Voltage: 380 V, 50 Hz, Degree of protection: IP44 Design: Horizontal, batch operation Gear box: SEW, Size: R 120 P Description: Lödige FKM 1200 D Equipment: Ploughshare blades Gkjdpfo Aitp Eex Akhjd Dimensions: L: 3.200 x W: 1.100 x H: 1.360 mm Technical doc.: Yes Message: The mixer was used in the food industry (spices) Condition: Second hand Price: By request

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: UB421, mileage: 154,542 km, power: 95 kW (129.16 HP), first registration: 01/2009, fuel type: diesel, empty load weight: 4,010 kg, maximum load weight: 1,990 kg, overall weight: 6,000 kg, axle configuration: 4x2, next inspection (TÜV): 11/2027, fuel: diesel, color: orange, gearing type: automatic, emission class: euro4, number of seats: 6, loading space length: 2,950 mm, loading space width: 2,200 mm, loading space height: 1,450 mm, Equipment: ABS, airbag, differential lock, sliding door, soot filter, tilting carriage, MB Vario 613 D tipper Double cab with 6. seats 1st hand vehicle Former municipal / authority vehicle Low emission Euro 4 (BlueTec4) Green environmental badge Automatic gearbox Twin tires on rear axle Differential lock rear axle Former city vehicle yellow rotating beacons Isri comfort driver's seat power steering Driver airbag electric exterior mirrors Radio with CD Swedish hatch Loading area dimensions in mm L: 2150/2950 W: 2200 H:1450 The loading area is divided into two compartments 1x 2150L 1x 800L but can be made into one loading area then 2950L Payload 1990 kg Unladen weight 4010 kg Gross vehicle weight 6000 kg Wheelbase 3700 mm Ready for immediate use Errors excepted, subject to change and prior sale We sell exclusively for our own account and under exclusion of any warranty. Subject to errors, changes and prior sale We are there for you Monday \- Friday from 9\.00 \- 17\.00, Saturday by appointment\. Outside these opening hours, appointments can be made by telephone\. We will gladly accept your current used appliance/vehicle in payment\. Sales to traders and exporters are given priority, this applies to our entire vehicle stock\. The above information is non-binding, subject to errors/changes and prior sale! Gkodpfx Ajrpmwkekhsd

Condition: used, Year of construction: 1958, fuel type: diesel, color: blue, power: 8 kW (10.88 HP), mileage: 1,001 km, first registration: 01/1958, gearing type: other, driver cabin: other, Vehicle location: Bovenden, Superstructure: The smallest Lanz tractor built! If you have any questions, please call ! Gjdpfx Asvhh Akekhekd Color: blue Very elaborately restored! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 13,619 h, load capacity: 5,000 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: simplex, construction height: 2,870 mm, fork carriage width: 1,800 mm, fork length: 2,200 mm, empty load weight: 6,775 kg, total length: 3,400 mm, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Load center: 600 Fork width: 150 mm Fork thickness: 60 mm Gsdpfx Ae Akap Tekhjkd ISO class: PIN-TYPE Mast type: Standard Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 315/70-15 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 2 x 250-15 Rear tire condition: 60 - 80% Battery year of manufacture: 2017 Additional single hydraulic circuit, integrated fork positioner, half cab with heater, 4x work lights at the front, 1x work light at the rear, Blue Spot