Automatic column band saw 500mm

CORMAK HR500SA przecinarka taśmowa do metalu

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high Cpodpfjfg E Hpsx Abueu static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Weiler C30 x 750 precision lathe (2007) Manufacturer: Weiler Type: C30 x 750 Year of manufacture: 2007 Availability: several machines available Condition: very good, used, from training workshop, last maintenance 09/2024 Center width 750mm Circulation diameter over bed 330mm Rotation diameter facing slide 160mm Movement of facing slide 180mm Bed width 240mm Turning tool cross-section 20 x 20mm Spindle head according to DIN 55027 size 5 Spindle diameter in front bearing 70mm Spindle bore 40.5mm Inner taper of the main spindle 5mm Drive power 60 %/100 % ED 9/7KW Total speed range 1 - 4,500 rpm Feed force longitudinal 6,000N Planar feed force 3,000N Feed range 0.001 - 10 mm/rev Rapid traverse speed longitudinal/plane 6/3 m/min Metric threads 0.1 - 400mm Inch thread 56 - 1/4 G/inch Module thread 0.125 - 28mm DP thread 224 - 1 Dp Max. Threads 99 Quill diameter 50mm Quill stroke 130mm Inner taper of quill MK3 Length 1750mm Width 1350mm height 1670mm Weight 1300kg Scope of delivery Rota S Plus 200-52 jaw chuck Multifix Machine light Csdpjxd Tiwofx Abujpu Coolant system Machine feet Original documentation Weiler maintenance log 09/2024

Condition: ready for operation (used), total width: 3,000 mm, total height: 5,350 mm, total length: 15,000 mm, empty load weight: 20,000 kg, Rollenbaan type G met Titan straalwielen Voor profielen, platen, rollen, buizen... maximale ingangsbreedte: 1100 mm maximale instaphoogte: 550 mm 4 turbines, elk 11 kW werksnelheid: 1,4 2,4 m/min Totaal vermogen: 62 kW Wordt op de vloer geïnstalleerd, geen fundering nodig! Cedpfowikatex Abuepu Inclusief een grote keuze aan nieuwe reserveonderdelen ter waarde van meer dan 80.000€!

Condition: new, - Semi-automatic - Hydraulic - Infinitely adjustable band saw speed - Double miter - Hydraulic clamping of the miter setting - Hydraulically adjustable sawing pressure - Fully hydraulic material clamping - Hydraulically adjustable clamping pressure Cpodpfxevkkl Ts Abuju - Cooling system - Automatic switch-off - Automatic switch-off of the machine at open cover, torn belt, reduced belt tension - Emergency stop - Documentation - 400V

Condition: used, Year of construction: 2009, Technical details: basket dimensions: 1160 x 600 x 500 mm Csdou Nu Iyspfx Abuspu heating capacity: 4 kW rated capacity: 16 kW rated current: 400V / 50/60 Hz A heating capacity: 4 kW temperature range: 0 - 60 °C weight of the machine ca.: 0,308 to dimensions L x W x H: 1,5 x 1,0 x 0,95 m Industrial Washing Plant The ultrasonic washing system (bath) is composed of external generator for two inserts. Type MW 2000 GT with 25 kHz sound power 2x2000 Watt with 9 levels adjustable continuous/pulse operation ultrasonic time adjustable The housing, the insert basket and the cover are made of stainless steel. The washing unit stands on a lower tub. Inner dimensions: L:1160 x W:600 x D:500mm (to drain 410mm) Protection class IP23 *

Condition: new, turning diameter over bed 410 mm turning diameter over slide rest 240 mm turning length 1000 mm Csdem Rlb Nspfx Abuopu turning diameter in the gap 530 mm turning speeds 65 - 1810 U/min centre height 205 mm spindle bore 52 mm tailstock quill taper MT 4 total power requirement 2,2 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 0,8 x 1,3 m Center lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material Cedpfjd Iipmex Abuopu 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Cutting range 90° Round: 260 mm Flat: 300 x 260 mm Smallest diameter: 5 mm Csdpfx Absh Tnd Asujpu NC-controlled, automatic material feed with hydraulic full-stroke material clamping Easy operation via NC control with plain text display Material advance function without reclamping for short section cuts Robust, linear-guided feed gripper with servo positioning for maximum precision Automatic adjustment of blade guides to material width Recommended options: Powered chip brush synchronized with blade speed Separate control panel 7" CE panel, network-compatible, up to 1000 data sets storable, history memory for various functions and data, etc.

Year of construction: 2006, condition: refurbished (used), HYDRAULIC PRESS MECAMAQ PRESSURE 350t STROKE 350mm TABLE LEFT RIGHT 600mm TABLE FRONT BACK 750mm POWER 15kw Dimensions: Height: 2,9m Width: 1,9m Length: 1,3m Cpjdpjfmqqlefx Abusu Weight: 5.700 kgr

Condition: used, Year of construction: 2015, x-travel 600 mm y-travel 800 mm Cjdpfx Ajvu E Rlobujpu z-travel 600 mm 0 1,7 + L µ Temperature range 20 °C weight of the machine ca. 1200 kg dimensions of the machine ca. 1319 x 1940 x 2710 m Gantry measuring machine on hard stone measuring plate with high accuracy, high- precision guides, wear-free precision air bearings, contactless scale system on all axes 0.1 µm, as well as with 3-axis CNC control, joystick,PH 10M rotary/ swivel head, measuring probe scanning kit 2 + scanning module kit. Dell OptiPlex system computer with LED monitor, keyboard, laser printer and software for graphical representation of the shape deviation, assistant for generating travel paths, simulation model, Excel protocol output, statistics module. Flexible exchange system for storing the scan modules. As is well known, measuring machines must be professionally dismantled by a specialist company and transported using special transport equipment. This costs approximately €3,500 + VAT. The machine has already been dismantled and issued with a certificate. It is in our stock now. Machine dealer with own stock of 1600 m².