Milling machine

Correa A30/40

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 20 rpm, table length: 4,500 mm, total height: 3,400 mm, total width: 5,390 mm, total length: 11,100 mm, workpiece weight (max.): 9,000 kg, overall weight: 22,500 kg, spindle motor power: 22,000 W, spindle nose: ISO 50, Fixed-bed milling machine built by Nicolás Correa in 2002, fitted with a Heidenhain TNC 426 CNC control and electronic handwheel. Working table measuring 4,500 × 1,100 mm with eight T-slots, 22 mm wide and spaced approximately 125 mm apart. Maximum permissible table load of 9,000 kg. Axis travels of 4,000 mm in X, 1,250 mm in Y and 1,500 mm in Z. Itedpfx Aszw Hgvecijl Universal milling head with manual positioning, hydraulic tool clamping and ISO 50 spindle taper. Main spindle rated at 22 kW with infinitely variable speed control across a range of 20 to 3,000 rpm. Cutting feed from 2 to 5,000 mm/min; rapid traverse of 15,000 mm/min on the X axis and 10,000 mm/min on the Y and Z axes. Compensation on the Y and Z axes, through-spindle coolant supply and provision for a fourth axis. The machine is supplied with a shared fourth axis, 400 mm in diameter. CE marked. Condition: axis movement is correct, with no unusual noise or vibration. Measured deviation of approximately 0.15 mm. The milling head is functional and shows slight play. The machine has been kept under basic maintenance and is in working industrial condition. Approximate weight between 22,500 and 24,000 kg. Approximate overall dimensions of 11,100 × 5,390 × 3,400 mm.

Condition: used, bore capacity in steel (diameter) 23 mm throat 220 mm bore stroke 120 mm Number of revolutions 25 - 3.200 U/min distance Spindlenose and center of table 275 mm table surface area 300 x 355 mm T-slots 3x T - slots distance 120 mm column diameter 110 mm Itodjyfwunopfx Acisl weight of the machine ca. ca. 120 kg dimensions of the machine ca. 0,8 x 1,0 x 1,9 m Table Drilling Machine IXION - BT 23 ST - incl. base cabinet

Condition: like new (used), Year of construction: 1997, Retrofitted: 2025 Numerical control: HEIDENHAIN TNC-320 Itodpfx Acjyw Uqxeiel Technical features Dimensions Table dimensions: 4500 x 1100 mmNumber of T slots: 8T slots dimensions: 22 mm   Traverses of axis Longitudinal traverse X: 4000 mmCross traverse Y: 1200Vertical traverse Z: 1000 Milling head Head type: New Universal Auto-indexing (UDG / every 2.5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)  /  Pull stud: DIN 69872Speed range: 20 - 3000 rpmSpindle power: 29,8 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 /  10000 mm/min Weight and dimensions Maximum weight on table: 8000 kgMachine weight approximate: 23500 kgMachine dimensions approximate: 11100 x 5392 x 3400 mm Accessories Guarding: 2 front doors and a new perimetral wire-mesh fence.Electronic handwheel: New HR-510Coolant: External Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: used, Swing Diameter Over Bed: 400 mm Swing Diameter Over Longitudinal Slide: 350 mm Distance Between Centers: 610 mm Travel Limit: 240 mm Suggested Workpiece Diameter: 200 mm Max Longitudinal Travel: 560 mm Machining Length: 550 mm Max Cross Travel: 40 mm + 120 mm Height of Spindle Axis from Floor: 1135 mm Programmable Spindle Speed Range: 40 to 4000 rpm Spindle Bore Diameter: 52 mm Spindle Interior Cone: MK 6 Slide/Bed Slope: 45/45° Turret Positions: 12 Tools Main Motor: 15 kW Ijdpfsxg Nd Aox Acijtl Control: Fanuc 6T Equipped with: See photos

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Iodeh Nypfepfx Aciotl

Year of construction: 2022, operating hours: 108 h, condition: refurbished (used), machine/vehicle number: SN2120, EDM312MF30-SLM (second-hand machine) Technical specifications: Travel ranges: 450x300x300mm Workpiece table 820x400mm Tank size 900x520mm Filling level 300mm Distance table/electrode holder 150/450mm Workpiece weight max. 800kg Dielectric fluid max. 700l Dimensions WxDxH 2700x1800x2350mm Machine weight 2500kg Power connection 3/N/PE 400/230 50Hz Power consumption 6.7 kVA Equipment: Color: Newly painted light grey + telegraph grey New control cabinet New control system APC910/2 (win10) User interface MF30 V 2.8 New B&R drives with Endat interface Touchscreen Generator exopuls+ 60A Rev.4 Rotary table, 5-axis Touch protection, operated via buttons Linear scales in all axes X, Y, Z (Fagor) Cartridge filters 2 pcs Cooling unit Termogamma Completely new machine installation New ball screws, bearings, coupling Maintenance unit with digital pressure switch Valve manifold CO2 extinguishing system C-axis Hirschmann 50/min., holding brake, completely overhauled Manual control panel with confirmation button Itjdpfxjhtrdye Acisl Lowering tank with automatic follow-up Chucks Erowa IST, Hirschmann, 3R Warranty 12 months Transport Commissioning on-site Training

Condition: used, functionality: fully functional, Forklift Kalmar LMV 9-600 Load capacity 9 T Iedpfx Acovq Im Ujiotl Diesel

Condition: like new (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 700 mm, total height: 2,800 mm, total length: 1,350 mm, total width: 1,260 mm, workpiece weight (max.): 300 kg, table width: 450 mm, overall weight: 2,300 kg, type of input current: three-phase, table length: 888 mm, drilling depth: 500 mm, Technical equipment Iedpfx Acevppw Seietl -4-way guide changer -32-way electrode changer -Preparation for rotary swivel axis -High quality of drive axes and guides -Integrated compressor cooling units for electronics and external connection option for dielectric cooling -High erosion performance thanks to MOSET generator -Fine filter for working with small pipe diameters EROSIX CONTROL -Fast probing -Simple programming for complex 5-axis machining -Extensive measuring cycles -Program transfer and storage via TCP/IP interface -High operating comfort

Condition: excellent (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 750 mm, table width: 1,500 mm, table length: 850 mm, rotational speed (max.): 2,500 rpm, quill stroke: 120 mm, SHW UF 5 Travels - X-axis (rotary table): 1,500 mm - Y-axis (vertical headstock): 1,000 mm - Z-axis (horizontal headstock): 750 mm Control system - CNC control: Heidenhain TNC 355 Automatic swivel head (change between horizontal and vertical machining) Quill 120mm Milling spindle holder SK 50 Speed 2500 rpm Itodpfx Acsvfm I Teiel Partial overhaul 2014 - Year of construction 1990 - Inspection/repair 2025 Table assembly - Travel distance: X = 1,500 mm - Clamping surface: 1,500 x 800 mm Chip conveyor Splash guard cabin We have ALL spare parts for this series (SHW UF 5) in stock! About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is in the field of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization _____ Used machine - used milling machine - used bed type milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - milling machine used - milling machine used - CNC milling machine used - drilling milling machine used - milling machine metal used - metal milling machine used - metal milling machine used metal milling machine used - used cnc milling machine - cnc milling machines - cnc milling machines - milling machine - large part machining - large part machining - large part machining - cnc large part machining - milling - shw - uf5 - uf 5 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 5 - UFZ 5 - UFZ5L - UFZ 5 L - MBM Milling Machine - MBM Machine

Condition: excellent (used), Year of construction: 2014, operating hours: 68,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,200 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 30 m/min, torque: 167 Nm, overall weight: 35,000 kg, Initial commissioning: December 2014 Control system: Fidia X-axis: approx. 2,200 mm Y-axis: approx. 3,500 mm Z-axis: approx. 1,200 mm A-axis: ± 100° C-axis: ± 275° Machine operating hours: approx. 68,000 h Total spindle hours: approx. 26,500 h Clamping table: 2,000 x 3,500 mm with T-slots 2-axis fork milling head Spindle power: 70 kW Spindle speed: max. 15,000 rpm Isdpfxeyrc Akj Aciotl Torque: max. 167 Nm Tool holder: HSK 100A Tool clamping: hydraulic Linear axis drives Feed rate X, Y, and Z axes: up to 50 m/min / 30 m/min Connection data Voltage: 400 V Frequency: 50 Hz Dimensions, weights Required space for machine without peripherals: approx. 8,000 x 6,000 x 5,000 mm Total weight: approx. 35,000 kg Additional equipment - Coolant system - 26-place tool changer - Work area enclosure - Chip conveyor Available at extra charge: - Wireless touch probe - BLUM laser Condition of the machine Fully operational, very good condition. Can be inspected under power.