Tool Room Milling Machine - Universal

DECKEL FP 1

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Manufacturer: Deckel Type: FP1 Machine number: 54.099/08 Machine type: Tool milling machine SPINDLE Spindle speed: 40–2,000 min⁻¹ Tool holder: SK 40 WORK TABLE Guodpfx Aj Adulqjkhei Table dimensions: 600 × 210 mm Table slots: 4 TRAVEL X-axis: approx. 300 mm Y-axis: approx. 300 mm Z-axis: approx. 300 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,000 mm Width: 800 mm Height: 1,500 mm Weight: 700 kg EQUIPMENT 2-axis digital display

Condition: good (used), Year of construction: 1991, machine/vehicle number: 139607, Offer 26215 Technical Data: - Drilling capacity 28 mm - Drill spindle mounting MK 3 - Tapping thread M 12 Gusdpfx Ajz Dtxcokhsi - Drill spindle speeds: - Level 1: 120 / 215 / 360 / 600 / 1080 rpm - Level 2: 240 / 430 / 720 / 1200 / 2150 rpm - Drilling unit with height adjustment via hand crank - Smallest / largest distance between table and drilling/milling spindle: 60 / 390 mm - Drill spindle stroke 100 mm - Fine feed adjustment of the spindle via handwheel - Drill spindle overhang 260 mm - Coordinate table with 3 T-slots: 600 x 240 mm - Table travel: - X-axis: 350 mm - Y-axis: 160 mm - Drive: 400 V / 0.7 / 1.3 kW - Footprint: approx. W 800 x H 1800 x D 900 mm - Weight: approx. 300 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS TRAVEL X-axis: 400 mm Y-axis: 300 mm Z-axis: 300 mm WORK TABLE Table dimensions: 600 × 210 mm Number of T-slots: 4 T-slot width: 12 mm SPINDLE AND FEED Spindle speed: up to 2,000 rpm Feed range: 10–500 mm/min MACHINE DETAILS Manufacturer: Deckel Type: FP1 Machine type: Tool milling machine Dimensions (L × W × H): 1,000 × 800 × 1,500 mm Weight: 700 kg Gsdpfx Ae Adui Ajkhoui EQUIPMENT Workshop cabinet Matching accessories for the machine

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS SPINDLE Spindle speed: 40–2,000 min⁻¹ Tool holder: SK 40 WORK TABLE Table dimensions: 600 × 210 mm Table slots: 4 TRAVEL RANGES Gjdpfj Aduhlex Akhoui Travel in X-axis: approx. 300 mm Travel in Y-axis: approx. 300 mm Travel in Z-axis: approx. 300 mm MACHINE DETAILS Machine type: Tool milling machine Manufacturer: Deckel Model: FP1 Machine dimensions length: 1,000 mm Machine dimensions width: 800 mm Machine dimensions height: 1,500 mm Machine weight: 700 kg

Condition: used, Year of construction: 1998, Technical details: height of profile: 180 mm max. dia. of grinding wheel: 200 / Topfscheibe mm grinding wheel hole diameter: k.A. grinding spindle speed: 2800 U/min Table dimensions: LxB: 500 x 160mm mm voltage: 220 / 380 V total power requirement: 3,0 kW weight of the machine ca.: 0,57 t dimension machine approx.LxWxH: 1,28 x 1,0 x 1,75 m Application for face grinding Magnet mount: LxW = 680 x 200mm; tilt approx. 15°; swivel 360° via radial scale magnet: Type S2D; permanent magnet, clamping surface 300 x 150mm. Grinding wheel support: -adjustment vertical = length 180mm manual; swivel = approx. 45° right/left manual. Operation via control panel on machine. Coolant tank with pump and feed Gusdpeu Ngrqsfx Akhji *

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min Gede Akchmepfx Akhoui rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: good (used), functionality: fully functional, Internal article number: 26103 Universal milling machine Deckel FP1 + 3-axis digital display K+C + New collet set + Coolant pump + Complies with occupational safety regulations Gedpfx Ae Aif N Iskhsui The machine comes from a training workshop and is in good condition, both technically and visually. The machine is fully functional and can be inspected while powered on, by appointment, in our heated warehouse covering over 500 m².

Condition: refurbished (used), Year of construction: 1988, Graver grinding machine Make: Maschinenfabrik Baden-Baden Model: FSS Year of manufacture: 1985 - overhauled, repainted RAL7012 basalt gray, RAL 7035 light gray Machine no.: 2992 Warranty: 12 months single layer from delivery, on the mechanics overhauled by us. The electrics and electronics are excluded, as they have only undergone a functional test. For machines located outside our northern Bavarian sales area, travel costs are to be borne by the customer. Accessories: - Grinding wheel with flange Gujdpfx Astqdqgjkhei - Operating instructions incl. new electrics On/off switch in new housing with undervoltage coil to realize the restart protection z. e.g. in the event of a power failure or if the mains plug is pulled out Used as seen The machine corresponds technically the state of the year of manufacture at that time.

Condition: used, Year of construction: 1970, Tool milling machine Deckel Type/Model FP1 Condition Used Geometrically overhauled in 2026, including geometry report Year of manufacture approx. 1970 The machine was completely disassembled, thoroughly cleaned, geometrically overhauled, and repainted. Subsequently, it was professionally reassembled, and a comprehensive functional test was performed. The machine geometry was checked. A test report according to DIN 8615 is available. During the work, the gibs were also adjusted, and the coolant pump was overhauled. Technical data Travel ranges X/Y/Z 300 / 150 / 340 mm Spindle stroke 60 mm vertical Tool holder MK 4 Speed range 40 to 2,000 1/min Two-stage motor, gear stages Speed steps 16 speeds Feed 16 steps 10 to 500 mm/min Drive power Two-stage motor approx. 1.0 / 1.4 kW Operating voltage 380 V / 50 Hz Total connected load approx. 1.9 kW Clamping surface 600 x 210 mm Max. table load approx. 150 kg Space requirement (W x H x D) approx. 1,100 x 1,000 x 1,500 mm Weight approx. 750 kg Equipment including: - Vertical milling head - Heidenhain 3-axis digital display - Automatic feed Gedoz A Tn Iopfx Akheui - Coolant system with overhauled pump - Equipment scope as shown in the picture Inquiry item: Transportation costs in an individual offer

Condition: reconditioned (used), Year of construction: 1976,

Condition: used, Year of construction: 1984, x-travel 300 mm y-travel 160 mm z-travel 340 mm digital readout 3 Achsen HEIDENHAIN spindle taper ISO 40 spindle turning speed range 40 - 2000 U/min Gjdjzz S Dujpfx Akhoui quill stroke 60 mm table-size 600 x 210 mm feeds -stepless- 5 - 500 mm/min rapid traverse 1200 mm/min power capacity 1,6 - 2,0 kW table load 200 kg voltage 400 V weight of the machine ca. 800 kg dimensions of the machine ca. 1,15 x 1,15 x 1,65 m electric cabinet 0,60 x 0,35 x 0,90 m !!! ATTENTION !!! EXCELLENT CONDITION !!! This machine comes from a vocational school! - Serialä-No.: 2102-2445 - 3-axis active digital display HEIDENHAIN TNC 116 - Rapid traverse - Machine light

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 from a training workshop Gsdps Ahq Eksfx Akheui Technical data: >> Machine no. 57752/08 >> Swiveling rotary table >> Speed: 40 - 2000 rpm >> Feed for 2 axes >> Drive power: 1 / 1.5 kW >> Travel ranges X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill – SK40 >> Spindle brake >> Collet system S20x2 >> Weight approx. 700 kg >> Coolant system About the machine: Offered is a Deckel FP1 universal milling machine in very good original condition. The Deckel has very little backlash and all spindles can be moved easily. The machine has a brake motor; the control cabinet was modified by the previous owner. The BGR inspection is no longer valid. An oil change has been performed. The FP1 comes from a large company and was only used for training purposes. Take advantage of the opportunity to inspect and test this machine on site while it is powered on. The machine is available immediately. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 from a training workshop Technical data: >> Machine no. 51434/08 >> Rotary, tilting, and swiveling table >> Speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travels X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill - SK40 >> Spindle brake >> Collet system S20x2 >> Weight approx. 700 kg >> Coolant system About the machine: Gjdpfxs Ahq A Ej Akhjui Offered is a Deckel FP1 universal milling machine in very good condition. The Deckel has very little backlash, and all spindles move easily. An oil change has been performed. The FP1 comes from a large company and was only used for training purposes. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up. The machine is available immediately. For an additional charge, the machine can be equipped with a new K&C digital display.

Condition: reconditioned (used), Year of construction: 1987, Universal Tool Milling Machine Manufacturer: DECKEL Model: FP 2 Aktiv Year of manufacture: 1987 – overhauled, newly painted with new machine electrics RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2202-11579 Milling head type: 2271 Milling head no.: 300-3606 with warranty Gedpfx Ajx A Eddjkhjui Geometric acceptance with inspection report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 - Fixed table 660 x 380 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Central lubrication, hand-operated - Coolant system - Operating manual - used, as seen -

Condition: good (used), functionality: fully functional, FOR SALE: DECKEL FP1 Milling Machine Technical specifications: • Model: FP1 (Serial number: 54212/08) • Machining travels: X = 300 mm | Y = 150 mm | Z = 340 mm • Spindle: SK 40 taper • Speeds: Mechanical adjustment via a circular selector on the front panel • Power supply: 400 V / Three-phase • Weight: Approximately 750 kg Included equipment: • VISOMAT 3-axis digital display on an articulated arm • Circular rotary dividing table mounted on the table • Articulated work lamp • Protective bellows for the slides, in excellent condition • Chip collection tray integrated into the machine frame Gsdpfj Af Au Nox Akheui Very clean used machine, slides in good condition, and ready for use.