Pillar jib crane

DEMAG

Condition: used, Year of construction: 2003, Clamping force: approx. 50 tons Components: 1 Horizontal screw diameter: approx. 30 mm Core pull: 0 Hot runner zones: 0 Flow rate: approx. 130 l/min Frequency: 50 Hz Power supply: 3/N/PE AC 400 V Pressure: approx. 210 bar Current: 94 A Weight: approx. 3.3 tons Gujdpfx Aljzlhxie Asd

Condition: excellent (used), Year of construction: 2008, overall weight: 120,000 kg, main lifting speed: 3 mm/min, working height: 10,000 mm, Double hoist 60 + 60 Ton Lifting class H2 Freqence vario speeds Hoist ABUS GM 7600U6 FEM Group 1Am Ikusi remote (TM70 2.13) Little used / Under power / Direct availebel Span: 31820mm Lift height: 10000mm Capacity Kg: 120000 Lifting speed:0,50 - 3,30 M/Min Hoist trolley:5/20 M/Min Crane driving:1/20 M/Min Length: 31820mm Width: 4500mm Height: 2300mm Gjdpfjxmf R Sex Al Aoud Weight: 86000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2006, Operating hours: 30,471,625 Clamping force: approx. 800 t Tie bar spacing: approx. 420 mm Flow rate: approx. 103 l/min Frequency: 50 Hz Power supply: 400 V Gjdpszlg Uvefx Al Ajud Pressure: approx. 210 bar Current: 82 A Weight: approx. 4.0 t

Condition: used, Year of construction: 2000, Clamping force: approx. 200 t Godpfx Alszlg S Ie Aeud Number of components: 2 Mold installation height: approx. 310 / 760 mm Opening stroke: approx. 300 / 575 mm Tie bar spacing: approx. 560 × 560 mm Horizontal screw diameter: approx. 50 mm Vertical screw diameter: approx. 30 mm L/D ratio: 1 / 20 Core pull: 2 Special equipment: Needle gate Hot runner zones: 16 Flow rate: approx. 190 l/min Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 196 A Current 2: 110 A Current 3: 86 A Current 4: 67 A Weight: approx. 9.7 t

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Guedslz Rvlepfx Al Ajd Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2001, Operating hours: 193589 Clamping force: approx. 250 t Number of components: 1 Gedpfx Aszlg N Hel Ajud Tie bar distance: approx. 840 × 840 mm Horizontal screw diameter: approx. 45 mm Core pull: 2 Hot runner zones: 0 Flow rate: approx. 206 l/min Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 139 A Current 2: 102 A Current 3: 37 A Current 4: 67 A Weight: approx. 10.7 t

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 861 0250, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,090 g, total length: 9,000 mm, total width: 4,000 mm, total height: 4,000 mm, overall weight: 20,000 kg, input frequency: 50 Hz, input current: 165 A, controller model: ERGOCONTROL, DEMAG ERGOTECH 420/800-2003 SYSTEM injection molding machine - Operating voltage: 3 x 400 V Gjdpfxszlfd Nj Al Aeud - Metering stroke: max. 315 mm - Nozzle stroke: max. 620 mm - Nozzle immersion depth: 45 mm - Includes the manufacturer DEMAG's loading system with a gripper robot and a conveyor belt - Conveyor belt length: 4000 mm - Conveyor belt width: 640 mm - Also includes various spare parts Please note: The item must be picked up between September 8th and 10th, 2026, on a date to be determined. FCA D-63128 Dietzenbach - loaded onto a truck.

Condition: new, weight max. in kg 1000 kg arm length 4000 mm height 3000 Unterkante Ausleger total column height 3790 mm swivelling range 270 Grad Total weight, approx. 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED Gedsxak Hxspfx Al Asud - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Gedpezc Ndcofx Al Ajud Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2015, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR853 robot Year of manufacture: 2015 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1,877 bar Dose volume: 1,212 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 720x720 mm Platen size: 1,040x1,060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Control with air valve Control with hot runner x 5 Injection unit hardened - bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Gusdpozc Nv Sofx Al Asd Central lubrication 3 hydraulic pumps with variable output Built-in printer Machine regularly serviced by authorized Sumitomo Demag service Wittmann-Demag DR853 robot Year of manufacture: 2016 6-axis robot: 5 axes driven by servo motors (electric): X, Y-telescopic, Z, B, C Axis travels: X-1,200, Y-2,400, Z-4,000 Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: used, functionality: fully functional, Year of construction: 2000, overall weight: 1,000 kg, total height: 3,500 mm, load capacity: 2,500 kg, throat depth: 5,000 mm, working height: 3,000 mm, DGUV certified until: 06/2025, Equipment: documentation/manual, Column-Mounted Jib Cranes & Wall-Mounted Jib Cranes TAUCHA / DEMAG / LIFTKET – 50 kg to 2,500 kg – Electric Chain Hoist – Multiple Systems Available For sale are several column-mounted and wall-mounted jib crane systems from Mechanik Taucha Fördertechnik GmbH, Demag, and Liftket. The systems offer a load capacity range from approximately 50 kg up to 2,500 kg, making them suitable for use in workshops, manufacturing plants, assembly workstations, as well as in in-house logistics. Gujdpjyt Hc Dofx Al Ajd Some of the cranes are designed as classic column-mounted jib cranes with a single jib arm, while select models feature a double-jib column design, allowing coverage of two separate working areas. All cranes are equipped with electric chain hoists and trolley carriages, operated via pendant controls. The systems can be purchased individually. Inspection by appointment is possible. Taucha Column-Mounted Jib Crane – Load capacity 2,500 kg Heavy-duty column-mounted jib crane with floor-mounted steel column and jib arm for industrial lifting and assembly applications. Taucha Column-Mounted Jib Crane – Load capacity 2,000 kg Column jib crane with pivoting jib for material handling in production and assembly areas. Taucha Column-Mounted Jib Crane – Load capacity 1,600 kg Industrial crane with column base and pivoting jib, suitable for medium to heavy loads. Taucha Column-Mounted Jib Crane – Load capacity 1,250 kg Column jib crane with jib arm and trolley for precise material movement. Taucha Column-Mounted Jib Crane – Load capacity 1,000 kg Column jib crane with electric chain hoist and pivoting jib for assembly workstations. Taucha / Liftket Column-Mounted Jib Crane – Load capacity 1,000 kg Column jib crane with Liftket electric chain hoist, suitable for industrial lifting operations. Taucha Column-Mounted Jib Crane – Load capacity 800 kg Column jib crane with pivoting jib and trolley, ideal for workshop and production areas. Taucha Column-Mounted Jib Crane – Load capacity 800 kg (Double Jib) Column jib crane with two opposing jib arms, suitable for servicing two workstations. Taucha / Liftket Column-Mounted Jib Crane – Load capacity 500 kg Column jib crane with electric chain hoist, ideal for lighter lifting tasks. Liftket Column-Mounted Jib Crane – Load capacity 500 kg Column jib crane with Liftket chain hoist and pivoting jib. Demag Wall-Mounted Jib Crane – Load capacity approx. 315 kg Wall-mounted jib crane with Demag electric chain hoist, suitable for workstations with limited space. Taucha Column-Mounted Jib Crane – Load capacity 250 kg Compact column-mounted jib crane for light loads. Taucha Column-Mounted Jib Crane CS KD 250-6 – Load capacity 250 kg Column-mounted jib crane with pivoting jib and electric chain hoist. Liftket Column-Mounted Jib Crane – Load capacity 250 kg Column jib crane with Liftket electric chain hoist for assembly tasks. Taucha Column-Mounted Jib Crane – Load capacity 200 kg Column jib crane for light material handling. Taucha Column-Mounted Jib Crane – Load capacity 125 kg Lightweight column jib crane for smaller components and tools. Taucha Column-Mounted Jib Crane – Load capacity 100 kg Compact workshop crane for light loads. Taucha Column-Mounted Jib Crane – Load capacity 50 kg Very light jib crane for small lifting applications.

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Guodpfxszc Nfmj Al Aod Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Gjdpfx Aljzc Nv Eo Asud Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosage volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Hardened injection unit - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Built-in printer Machine was regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, safety enclosure Robot acquisition available at an additional cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine, or to take part in technical live tests at our facility in Łódź. Price: On request

Condition: good (used), Sturdy crane system, ideal for glass storage or workshop, Load capacity: 3t, Length: 14250 mm, width: 8500 mm, height: 3650 mm Max. hook height: 3280 mm, Gjdperyv S Aofx Al Ajud Max. Overall height: 3950 mm.

Condition: excellent (used), Year of construction: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 70 mm Gedpozc Nwcjfx Al Aoud Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping Unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface 5x air valves 1x hydraulically operated core pull with proportional valve 5x hot runner controls Hardened injection unit – bimetal Moog proportional valve on the injection unit – high-precision injection Parallel movements Central lubrication 3 variable-capacity hydraulic pumps Integrated printer Machine has been regularly serviced by authorized Sumitomo Demag technicians Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Axis travel: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 15,750 kg L x W x H: 8.26 x 2.01 x 2.27 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request