Injection molding machine

SUMITOMO shi-Demag

Condition: used, Year of construction: 2019, Sumitomo (SHI) Demag EL-EXIS SP 1000/1195-6300 Injection Moulding Machine General Information Manufacturer: Sumitomo (SHI) Demag Model: EL-EXIS SP 1000/1195-6300 Year of Manufacture: 2019 Country of Origin: Germany CE Marked: Yes Availability: Immediately available Location: Belgium ----- Technical Specifications Clamping Force: 10,000 kN (1,000 tonnes) Screw Diameter: 119.5 mm Injection Unit: 6300 International Size: 10000 / 6300 Control System: NC5 Plus / C-Dias Machine Weight: 67,600 kg Maximum Operating Pressure: 210 bar Power Supply: 3 × 400 V / 50 Hz Connected Load: 204 kVA Rated Current: 552 A ----- Operating Hours PLC / SPS Hours: 37,916.5 hours Drive Hours: 25,326.0 hours Heating Hours: 29,982.7 hours ----- Description Well-maintained Sumitomo (SHI) Demag EL-EXIS SP 1000/1195-6300 all-electric high-performance injection moulding machine built in 2019. The EL-EXIS series is specifically designed for applications requiring exceptional productivity, fast cycle times, high precision and reduced energy consumption. It is particularly suitable for packaging applications, thin-wall products and technical mouldings. Nljdpj Afbz Uefx Abush The machine is equipped with the advanced NC5 Plus / C-Dias control system and remains in very good operating condition. Inspection under power can be arranged by appointment. Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Manufacturer: Sumitomo (SHI) Demag Model: EL-EXIS SP 1000/1195-6300 Year of Manufacture: 2019 Availability: Immediately available Location: Belgium Clamping Force: 10,000 kN (1,000 tonnes) Screw Diameter: 119.5 mm Injection Unit: 6300 International Size: 10000 / 6300 Machine Weight: 67,600 kg PLC / SPS Hours: 37,916.5 hours Drive Hours: 25,326.0 hours Maximum Operating Pressure: 210 bar

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, travel distance X-axis: 3,030 mm, travel distance Y-axis: 1,520 mm, travel distance Z-axis: 310 mm, total length: 9,500 mm, total width: 4,500 mm, total height: 2,050 mm, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, VS-3015CE 6KW FIber Laser Sheet Cutting Machine Working area (mm) : 3000×1500 X axis travel distance (mm): 1520 Y axis travel distance (mm): 3030 Z axis travel distance (mm)： 310 X/Y axis positioning accuracy ： ≤0.03mm\m X/Y axis repeat positioning accuracy： ≤±0.02mm Max. synthetic positioning speed: 150m\min Max. acceleration: 2G Double-sided control panel, adaptive multi-angle placement, simple disassembly, and can fit into a standard 40HQ container. Nlsdpsv Ngrajfx Abush Industrial-grade special air conditioner, constant temperature and humidity for stable performance. Automatic grease and oil injection system, intelligent air pressure monitoring device, and anti-collision detection device provide intelligent protection.

Condition: used, Year of construction: 2000, screw diameter: 95 mm, clearance between the columns: 1,000,900 mm, injection pressure: 1,832 bar, injection weight: 2,550 g, mold height (min.): 450 mm, ejector force: 138,000 N, ejector stroke: 300 mm, plate length: 1,450 mm, plate width: 1,350 mm, total length: 10,100 mm, total width: 2,500 mm, total height: 2,600 mm, overall weight: 33,200 kg, Demag Ergotech 650/1000-5200 system Year of manufacture: 2000 Control system: NC4 Injection unit 5200 - Screw diameter: 95 mm - Specific injection pressure: 1832 bar - Injection volume: 2835 ccm - Injection shot weight: 2550 g - Pump motor power: 74 kW - Cylinder heater power: 43 kW - Screw L/D ratio: 20 Mold closing unit 6500 - Clamping force: 650 t - Mold plate dimensions: 1450 x 1350 mm - Distance between tie bars: 1000 x 900 mm - Ejector force: 138 kN - Mold height: 450 mm - Opening stroke: 930 mm - Maximum mold plate distance: 1880 mm - Ejector stroke: 300 mm Electrical connection (fuse): 1300 A Weight: 33200 kg Dimensions (m) length x width x height: 10.1 x 2.5 x 2.6 m Equipment: - NC4 control system with color screen - Screw Ø 95 mm, L/D 20 - Injection, holding, and packing pressure adjustable by servo valve - Core pull system with 4 circuits on proportional valves on the moving platen - Hot runner control with 8 zones - Hydraulic control for hot runner nozzles (1 valve) Nsde Adp Elepfx Abuslh - 10-circuit water distribution manifold with temperature indication - Pneumatic ejector - Additional fine oil filter in the bypass - Interface for a host computer

Condition: used, Year of construction: 2003, screw diameter: 80 mm, clearance between the columns: 800,710 mm, injection pressure: 1,855 bar, injection weight: 1,600 g, mold height (min.): 380 mm, ejector force: 90,000 N, ejector stroke: 230 mm, plate length: 1,200 mm, plate width: 1,100 mm, total length: 8,400 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, Demag Ergotech 420/800-3300 system Year of manufacture: 2003 Control system: NC4 Injection unit 3300 - Screw diameter: 80 mm Nedpfx Abj Adpt Asuolh - Specific injection pressure: 1855 bar - Injection volume: 1779 cc - Injection shot weight: 1600 g - Cylinder heating band power: 31 kW - Screw L/D ratio: 20 Tool clamping unit 4200 - Clamping force: 420 t - Tool plate dimensions: 1200 x 1100 mm - Daylight between columns: 800 x 710 mm - Ejector force: 90 kN - Tool height: 380 mm - Opening stroke: 710 mm - Maximum distance between platens: 1530 mm - Ejector stroke: 230 mm Electrical connection (fuse rating): 760 A Weight: 21000 kg Dimensions (m) length x width x height: 8.4 x 2.2 x 2.5 m

Condition: good (used), Rotary vane vacuum pump, oil-lubricated, 2-stage Status: General overhaul Warranty: 12 months Manufacturer: Leybold Type: Trivac D16B Pumping speed: approx. 16 m³/h Ultimate pressure: approx. 5 x 10⁻³ mbar Motor: 400V, three-phase Operating fluid: Mineral oil Accessories: Operating manual Nsdpfx Asbgdifsbujlh Oil mist separator optional Delivery time: upon agreement (subject to prior sale) Spare parts, operating fluids, or alternative pumps available upon request.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 32,000 h, functionality: fully functional, clamping force: 2,100 kN, screw diameter: 50 mm, clearance between the columns: 580,580 mm, injection weight: 402 g, opening stroke: 690 mm, installation height: 340 mm, Incl. Geiger robot Midiliner F 10.0 year 2011, Conveyor and safety cage Nodo Aarbbepfx Abuelh

Condition: used, Year of construction: 2011, clamping force: 1,600 kN, screw diameter: 45 mm, clearance between the columns: 520 mm, injection pressure: 1,914 bar, injection weight: 294 g, mold height (min.): 275 mm, ejector force: 59,000 N, ejector stroke: 160 mm, total length: 5,410 mm, total width: 1,660 mm, total height: 2,140 mm, overall weight: 7,090 kg, Used Sumitomo (SHI) Demag Systec 160/520-600 injection molding machine, manufactured in 2011. Technical specifications: Nedpfx Aez T Iufjbujlh - Clamping force: 160 t (1600 kN) - Injection unit: 600 - Screw diameter: 45 mm, L/D 20 - Specific injection pressure: 1914 bar - Injection volume: 323 cc - Injection shot weight: 294 g - Cylinder heater power: 11.3 kW - Tool plate dimensions: 770 x 770 mm - Distance between columns: 520 x 520 mm - Tool height (min.): 275 mm - Opening stroke: 500 mm - Maximum distance between plates: 1085 mm - Ejector force: 59 kN - Ejector stroke: 160 mm - Weight: 7090 kg - Dimensions (L x W x H): 5.41 x 1.66 x 2.14 m - Control system: NC5 Equipment: - NC5 control system with color screen - Screw Ø 45 mm, L/D 20 - 5-zone hot runner control - Air blow valve on the moving platen - Clamping force adjustment - Active mold protection (activeProtect) - Demag robot interface - WC5 remote service - Process data logging and statistics - Reinforced oil cooler

Condition: excellent (used), Year of construction: 1988, Krauss Maffei KM 250-900B Closing force: 250 tons Nlsdpfx Aefp U Hvjbush Year of manufacture: 1987 Injection weight: 470 g Tie bar spacing: 63 x 56

Condition: excellent (used), Year of construction: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping Unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface 5x air valves 1x hydraulically operated core pull with proportional valve 5x hot runner controls Hardened injection unit – bimetal Moog proportional valve on the injection unit – high-precision injection Parallel movements Central lubrication 3 variable-capacity hydraulic pumps Integrated printer Machine has been regularly serviced by authorized Sumitomo Demag technicians Robot Wittmann-Demag DR833 Year of manufacture: 2011 Njdpfxoz Iplmj Abujlh 4-axis robot: 3 axes driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Axis travel: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and protective enclosure Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 15,750 kg L x W x H: 8.26 x 2.01 x 2.27 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2014, Sumitomo Demag Systec 210/580-430 with Sepro Success 22 robot / Hybrid machine Year of manufacture: 2014 Injection unit: Screw diameter: 35 mm Shot weight: 153 g Injection pressure: 2640 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 210 t Tie bar spacing: 580x580 mm Platen size: 860x860 mm Ejector: hydraulic Clamping unit: toggle Controller: NC5 Nsdpfoz Ipkcjx Abuelh Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and quiet Operating hours: approx. 30,000 h in automatic operation Euromap 67 Robot interface Air valve x 9 Hydraulic needle core pull, controlled by a proportional valve x 1 Hydraulic core pull x 4 Air core pull x 5 Controller with hot runners x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by an inverter - energy saving Proportional valve on the injection unit – precise injection Parallel movements Integrated printer Dimensions: Weight: 8930 kg Length/Width/Height: 6.02x1.76x2.15 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: good (used), Rotary vane vacuum pump, oil-lubricated Manufacturer: Leybold Type: Trivac D 30 A & S 30 A Voltage: 400V / 50Hz Pumping speed: approx. 30 m³/h Ultimate pressure: approx. 5x10e-3 mbar & 5x10e-2 Condition: Overhauled Nodpfx Ajb Ii E Debuelh Warranty: 12 months Accessories: Operating manual Mineral oil filling Quantity: several available Delivery time: from stock

Condition: excellent (used), Year of construction: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Nlsdpfxez Ipi So Abush Dosage volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Hardened injection unit - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Built-in printer Machine was regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, safety enclosure Robot acquisition available at an additional cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine, or to take part in technical live tests at our facility in Łódź. Price: On request

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, Sumitomo DEMAG Systec 170/520-600 NC 5 Year of manufacture: 2008 Control system: NC 5 Screw: 45mm Injection volume: 323ccm / 294g Clamping force: 1700KN Tie-bar spacing: 520mm x 520mm Mold height: min 275mm - max 585mm Maximum plate spacing: 1085mm Opening stroke: 500mm Ejector stroke: 160mm Core pull: 2x Pneumatic valve: 1x Equipment: Core pull, 2-circuit, serial to tool movement on the movable platen Pneumatic valve 5/2, No. 1, on the movable tool platen Ejector parallel to the tool movement Nodpfjz Rkmfjx Abuslh Clamping force controlled Freely programmable inputs/outputs (3 inputs/3 outputs) 3 in/3 out, freely programmable Start/stop program (with purging) Interface for handling, Euromap 67 (50-pin) Interface for tool protection (ejector plate safeguard) Plug-in ejector plate safeguard Integrated hot runner control, 8 zones Tool protection Switch-off of tool cooling Closed-loop clamping force control Active mold protection via sensor Hydraulic screw drive, high speed Temperature control of cooling feed zone Follow-up pressure switchover WID 1 circuit Back pressure programmable Injection via DFE pump, speed closed-loop Intrusion Reduced nozzle sealing force at open mold, programmable Process data recording (PDE) with graphics and control Extended storage for process/mold data and report lists on internal memory Program for storing process data on external memory Switch-on/off program with purging Flexible clamping sequence with ejector and cores Amendment report Event history Help function, integrated hints via control Detailed hints via control Preventive maintenance program 2 freely programmable screens Intrusion 2x socket combination 380V, 230V Printer Change journal PDE control, graphics ERGOStart The machine is currently being overhauled and tested for functionality.

Condition: excellent (used), Year of construction: 2009, Closure canister 4 cavities per mould Hot runner Two moulds available Nedpfx Aexrtmxobuolh

Condition: used, Year of construction: 2023, Machine No. 26, Serial No. 7271-0616, NC5+ control system, maximum clamping force 1,300 kN, conveyor system, manufacturer Colortronic, handling system, manufacturer Wittmann, type Primus 14-0704, year of manufacture 2023, safety enclosure, conveyor belt, L/W approx. 1,800 x 800 mm, skylight. Nedpfx Abjz H Rc Dsuslh