Press

Dener CNC Abkantpresse Ketzer 30125 XF

Condition: excellent (used), Year of construction: 2002, quill stroke: 35 mm, grinding spindle speed: 1,670 rpm, overall weight: 4,000 kg, Used cylindrical grinding machine STUDER S40 : - 350 mm permissible diameter - Distance between centers 1000mm - Table travel 1050mm - Standard grinding wheel dimensions: 400x40x12mm Technical specifications : - Distance between points: 1000mm - Tip height: 175mm - Strokes: 1050 x 275mm - External grinding wheel dimensions: 400 x 40 x 127mm - Grinding head power: 7.5kW Pedpfx Ahsmuz Sqo Usha - Speed: 1,670 to 2,110 rpm - Workpiece-holder headstock taper: ISO 50 - Headstock power: 0.785kW - Max. workpiece weight between centers: 130Kg - Tailstock: Morse 3 type - Quill travel: 35mm - Weight: 4000Kg

Condition: good (used), Year of construction: 2005, Gebruikte 3 meter Amada CNC kantbank Type: HFP 130 3 Capaciteit: 3100 x 130 ton Phjdpfx Ahswz I Irj Uoa 8-assig (Y1, Y2, X1, X2, R1, R2, Z1 en Z2) Bouwjaar: 12-2005 Automatisch Fiessler Alas lasersysteem Euro-stijl gereedschapsklemming met laswisseladapters

Year of construction: 1992, condition: good (used), 21 rolls, Ø 80 mm strip width: 500 - 1.650 mm strip thickness: 1 - 5 mm Phodpfx Ahog Iirnj Uja

Condition: used, different types available Pedpsdc A Sbsfx Ah Uoha

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Pjdpfskvnumex Ah Uoha Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1986, plate thickness 6,0 mm pressure 18 t cutting angle - upper blade 90 ° blade length 225 x 225 mm voltage 380 V Pedpfxsg Ip Efo Ah Ujha total power requirement 5,5 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1,10 x 0,80 x 1,05 m - Angular stops adjustable

Year of construction: 2011, condition: excellent (used), IWN Crusader Crate / Utensil / Tunnel Washer Year 2011 All Stainless steel Power wash and rinse system with digital adjustable temperature controller Chemical dosing facility for wash and rinse system Gas fired burner with reset facility Complete with extractor fan and ducting Pjdpfx Ahsgqutco Ujha In excellent working condition, ready for use.

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box. Phjdoxddvnepfx Ah Uja

Condition: excellent (used), Year of construction: 2006, Technical Specifications: Phsdpfx Aewmw Acoh Uea Press Brake: Model: AMADA HDS 1030 NT Working Length: 3100 mm Folding Width: 2700 mm Press Force: 100 t CNC Control: AMADA AMNC PC 3D-graphic 15-inch TFT Color Screen Controlled Axes: 7 Drive: Servo-Hydraulic Installation Height: 500 mm Motorized Adjustable Backgauge: 600 mm Thrust: 415 mm Stroke: 200 mm Working Height: 960 mm Motor Power: 9 kW Dimensions (Length x Width x Height): approx. 4300 x 2300 x 2950 mm Weight: approx. 8 tons Loading and Unloading Robot: Model: ASTRO-MP 20 Max. Capacity: 20 kg Number of Controlled Axes: 6 CNC control: AMADA AMNC II Drive: AC servo motor Bending robot: Model: ASTRO-100 NT CNC control: AMADA AMNC II Max. capacity: 20 kg Number of controlled axes: 5 Length of linear axis: 3080 mm Max. cutting size for sheet metal: 800 x 1000 mm Max. cutting size for profiles: 300 x 1800 mm Drive: AC servo motor The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2016, Technical details: turning diameter over bed: 402 mm turning dia. over face-slide: 245 mm turning length: 1000 mm centre distance: 1000 mm centre height: 200 mm swing diameter: in Kröpfung: 560 mm throat: Breite: 120 mm revolution per minute: 40 - 345 / 345 - 1015 / 1015 - 2800 U/min feed: längs: 0,05 - 0,752 + quer: 0,025 - 0,376 mm/U spindle diameter: Ø 42 mm tailstock taper ISO: MK4 tailstock quill stroke: 180 mm Podpfjvav Sdex Ah Usha total power requirement: 4,1 kW Weight approx.: 1,2 t dimension machine xH: 2,4 x 1,0 x 1,7 m Die Drehmaschine verfügt über keinen Eilgang. Positionierung über 2-Achsen Anzeige über Pinacho Lathe Controller Multifix-Stahlhalter mit Drehmeißel Kühlmittelanlage Fußtaster Gewindeschneiden möglich (metrisch, Whitworth, Modul, Pitch) *