Universal machining center

DMG MORI DMU 60 eVo

Condition: used, Year of construction: 2014, x-travel 600 mm y-travel 500 mm Rsdpfx Afeycxinoxju z-travel 500 mm total power requirement --- kW weight of the machine ca. 9,6 t dimensions of the machine ca. --- m

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 530 mm, table load: 500 kg, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 60, number of axes: 5, This 5-axis Mazak VARIAXIS C 600 was manufactured in 2022. It features a table size of 730 x 450 mm and impressive travels of 650 mm in the X-axis, 550 mm in the Y-axis, and 530 mm in the Z-axis. The machine is equipped with a spindle speed of 18,000 rpm and a tool magazine that holds 60 tools. If you are looking to get high-quality machining capabilities, consider the Mazak VARIAXIS C 600 vertical machining centre we have for sale. Contact us for further details. • Control: Smooth X • Table size: 730 x 450 mm • Through-spindle coolant: 20 bar • Number of pallets: 1 • Table type: T-slot table Rsdpfjyxdcgsx Afxou • Capability: Continuous simultaneous 5-axis machining Additional equipment • Renishaw probe • Remote handwheel • Air blow on spindle flange Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2014, operating hours: 14,950 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Exclusive use in plastics processing – no heavy-duty machining, no steel, stainless steel, or titanium processing; resulting in reduced wear on the spindle, guides, ball screws, and rotary axes. Technical data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: Rodpfjy Smm Ujx Afxou - Speed range: 20 – 18,000 rpm NC rotary table: - Table clamping surface: 600 x 500 mm - Loading capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool holder: HSK-A63 Chip conveyor: not shown, but available. Operating hours: approx. 50,320 h Spindle hours: approx. 14,950 h

Condition: excellent (used), Year of construction: 2015, operating hours: 50,976 h, functionality: fully functional, nominal power (apparent): 57 kVA, overall weight: 9,850 kg, spindle speed (max.): 18,000 rpm, input voltage: 400 V, For Sale: DMG MORI DMU 60 eVo CNC 5-Axis Universal Machining Center — 2015 German-made DMG MORI DMU 60 eVo CNC 5-axis universal machining center, suitable for high-precision and complex milling operations. The machine offers excellent rigidity, precision, and productivity for mold manufacturing, precision engineering, automotive, aerospace, and general machining applications. Main Specifications: Manufacturer: DMG MORI / DECKEL MAHO Seebach GmbH Model: DMU 60 eVo Rodpfx Asy Rd Rnjfxsu Year: 2015 Origin: Germany Spindle Speed: 18,000 rpm Weight: 9,850 kg Power: 57 kVA Voltage: 400 V / 50 Hz CE Certified Available for inspection. Photos, videos, and further technical details can be shared upon request.

Condition: good (used), Year of construction: 2007, Used OKUMA lathe - Model: LT200-M TwinStar - Year: 2007 - including chip conveyor - coolant tank Rodpsv S Svvjfx Afxou - immediately available

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 640, total height: 2,700 mm, overall weight: 9,600 kg, spindle speed (max.): 20,000 rpm, product length (max.): 3,000 mm, number of axes: 5, This 5-axis DMG MORI DMU 60 EVO was manufactured in 2017. It features a Heidenhain iTNC 640 control, a spindle speed of 20000 rpm, and a 120-fold tool changer. The machine includes a chip conveyor, coolant system, and an internal coolant supply of 40bar. It's well-suited for high-precision machining tasks. Consider the opportunity to buy this DMG MORI DMU 60 EVO vertical machining centre. Contact us for more information about this machine. • NC swivel rotary table • Tool changer: Yes, chain magazine 120 positions (120-fold) • Coolant: internal/external; internal coolant supply 40 bar / 6001; extended chip flushing; flushing gun; blast air through spindle center • Rotating viewing window • Electronic handwheel • Screen display: German/English Rodpfx Aoy D Hvaefxeu • Space requirement: 25 sqm • Condition: Very good, in operation Additional equipment • Chip conveyor • Oil and emulsion mist separator • Infrared PP 60 optical measuring probe • Tool breakage control TRS2 • Signal light, 4-color • Extended interface M65 for Erowa Job Management System • Preparation for EROWA handling system (Operating mode 4) • Accessories: 120x SK40 tool holders Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm Redpfx Afexgnz Texsu NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

Condition: new, Extraction capacity of filter unit at spigot*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 db(A) Dimensions L/W/H in mm: L 329 / W 374 /H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on the filter equipment Special voltage or special colour on request Application: Extraction of oil mist and smoke, for small to very large machine workrooms. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects. Redpfxeh Rdwxj Afxju

Condition: good (used), Year of construction: 2014, feed length X-axis: 1,000 mm, feed length Y-axis: 700 mm, feed length Z-axis: 180 mm, travel distance X-axis: 1,000 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 180 mm, Selling FIVE working Datron M10 Pro due to relocation, with a 6th M10 Pro for SPARES/REPAIR. 1 x Datron M10 Pro 2018 3kw 40k HSKE25, 2 x 12 tools fixe axis capable linear scale option 1 x Datron 8 Cube 2015 Rsdpfx Afjywu Tyjxeu 3kw 40k HSKE25, 2 x 12 tools fixe axis capable 1 x Datron M10 Pro 2014 3kw 40k HSKE25, 2 x 12 tools 1 x Datron M10 Pro 2014 3kw 40k HSKE25, 2 x 12 tools 1 x Datron M10 Pro 2014 3kw 40k HSKE25, 2 x 12 tools 1 x Datron M10 Pro 2014 Spares/Repair ONLY , no spindle, no XYZ servos, no computer. Available for immediate sale. The DATRON M10 Pro is a high-speed CNC milling machine designed for precision and versatility in industrial applications, particularly for the aerospace, medical technology, and electronics industries. Built with a solid granite table for vibration damping and thermal stability, it is engineered for high-speed cutting (HSC) of non-ferrous metals like aluminium, composites, and plastics with a 3.0 kW HF Spindle HSK-E 25.

Year of construction: 2000, condition: used, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control WENZEL WPC 2040/FW31.351 total power requirement kW weight of the machine ca. 5500 kg dimensions of the machine ca. m Rjdpfot Hw Nyjx Afxeu Coordinate measuring m/c, software QUARTIS R12/16, Renishaw PH10Mplus