Hydraulic Drawing Press

SMG HZPU

Condition: used, Year of construction: 1997, Pressure 500 t distance between columns 1550 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1200 x 1300 mm pressure of drawing cushion in table 250 t stroke of drawing cushion in table 150 mm die cushion area 950 x 950 mm table height over floor 1245 mm side window 1250 mm ram surface 1200 x 1300 mm speed down 750 mm/s speed up 780 mm/s working speed 105 mm/s oil volume 4000 l power requirement 263,0 kW weight 45,0 t Dimensions (WxDxH) 3,3 x 3,3 x 6,1 m height over floor 6,1 m Pedpfx Afsvuk T Eohogg YOM 1978 - overhaul 1997 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, pneumatic ejector in ram (0,5 t), cutting impact cushioning with depth stop (motoric adjustable), mechanical ram interlocking in TDC as is where is, WITHOUT putting into operation

Year of construction: 1990, condition: good (used), machine/vehicle number: 92041, table mounting size: 410 x 900 mm movements x/y/z: 560/410/380 mm Pgjdsdhhprspfx Afhsg spindle taper: SK 40 spindle turning speed range: 22 - 6000 rpm carriages: x/z until 10000, y until 240 mm/min space needed: 2600 x 2000 x 2300 mm weight: 3500 kg

Condition: used, Year of construction: 1992, Pressure 200 t distance between columns 1910 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 800 mm table surface area 1900 x 1150 mm pressure of drawing cushion in table 80 t stroke of drawing cushion in table 300 mm die cushion area 1500 x 950 mm table height over floor 800 mm side window 1000 mm ram surface 1900 x 1100 mm return capacity 36 t speed down 400 mm/s speed up 170 mm/s working speed 30,5 mm/s Pgjdpfxevuui Ro Afhsg oil volume 1500 l height over floor 4,85 m height beneath floor 2,6 m power requirement 45,0 kW weight 38,0 t dimensions (WxDxH) 3,05 x 2,8 x 5,55 m year of manufacture 1975 - modernization 1992 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, ram interlocking can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 2001, Manufacturer: SCHULER SMG, Model: HZPU-T 1000-2500/2100, Year of manufacture: 2001, Serial No.: 7.5592, Pressing force: 1,000 t, Changeable table: 2,500 x 2,100 mm, Ram surface: 2,500 x 2,100 mm, Max. ram stroke: 1,300 mm, Drawing cushion table pressure: 30-200 t, Drawing cushion stroke: 300 mm, Press control with OP Siemens Simatic OP 37, Control and switch cabinets Pgedsx Ry Ntspfx Afheg

Condition: like new (used), functionality: fully functional, The static autoclave bases its sterilization system on the heat and cold transmission system by means of a water cascade. This autoclave is suitable for products that do not require movement during the sterilization process. The water, by means of a pump, is passed through a stainless steel plate exchanger for indirect heating. The heating and cooling of the water, which we use in all the cycles of the process, is carried out in the plate heat exchanger by means of steam or cold water. PRODUCTS: CANNED VEGETABLES, PASTA, PRE-COOKED FOODS, JUICES AND BEVERAGES, MEAT PRODUCTS, PATES, Pgedpfx Aown Hgtofhjg CANNED FRUIT, FISH. Features: Diameter: 1380mm. Basket: 1X0.99X0.93m. Heat exchanger. Automated loading and unloading. Operation by waterfall system. Control panel. Valves.

Condition: used, Year of construction: 1989, Pressure total: 1400 ton Pgjdpfx Afjuqdi Ujheg Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton Standard configuration with hydraulic tool clamps on the ram

Condition: refurbished (used), Year of construction: 1971, functionality: not functional, machine/vehicle number: 7/2118, total height: 4,800 mm, table height: 950 mm, installation height: 800 mm, total width: 2,500 mm, total length: 1,800 mm, pressing force: 100 t, table width: 1,000 mm, table length: 870 mm, operating speed: 400 mm/s, overall weight: 10,800 kg, reverse speed: 300 mm/s, ram plate width: 1,000 mm, ram plate length: 870 mm, distance table to ram: 800 mm, type of input current: three-phase, stroke length: 500 mm, oil tank capacity: 800 l, input voltage: 400 V, pressing speed: 50 mm/s, Equipment: documentation/manual, safety light barrier, The press is currently undergoing a complete overhaul. Cylinder seals have been replaced and the hydraulic pump has been tested for functionality. It is equipped with a hydraulic safety block that complies with the latest safety regulations. A completely new electrical system and PLC control, including a front safety light curtain, ensure the press is almost as good as new. Pgsdsxyxrispfx Afheg

Condition: excellent (used), Year of construction: 2014, First commissioning: 2014 Control: Heidenhain iTNC 530 HSCI including HR 520 handwheel Machine hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Feed speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical specifications Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Pedjwywciopfx Afhsgg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra cost: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition and available for inspection under power! Images are sample photos from a new machine of this type. Original images to follow shortly!

Year of construction: 1970, condition: not inspected (used), Offered here is a balancing machine from the company Trebel. The machine has a solid steel protective hood. Psdpfehikdwjx Afhjgg For rebuilding, because the control cabinet is missing! Technical data: Manufacturer: Trebel Type: FC4c-xn Year of manufacture: 1970/74 Normal weight range up to 400kg Max. permissible load per block: 200kg

Condition: good (used), Year of construction: 2011, GILDEMEISTER CNC Twin-Spindle Turning Center Type: CTX beta 1250 4 A Machine No.: 00700000211 Year of Manufacture: 2011 Control: CNC contouring control including 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and with ShopTurn 3 G Power-on time: 41,378 h Program runtime: 24,814 h Technical data and equipment available upon request Podswcxlwopfx Afhjgg