Vessel Turning Unit

DUMETA D-TLRS-150-D

Condition: new, weight max. 10 t workpiece diameter 100 - 3200 mm drum diameter 300 x 120 mm feed 100 - 1000 mm/min total power requirement 2 x 0,55 kW Podpfx Aof Ep Dijazogt

Year of construction: 2025, condition: new, Description:  Screen deck system consisting of 1 deck for separating old wood or wood chips.  Input material: 0-200 mm  Capacity: approx. 80 m³/h (material-dependent)  Material separation into 2 fractions: 0-25 mm and oversized fraction  To be mounted on customer-owned impact plates or a substructure Technical Data:  Screen deck 1: Length = 5,200 mm; Width = 1,215 mm o External dimensions: Length = 5,500 mm; Width = 1,850 mm o Screen area: 6.3 m², Number of shafts: 40 o Drive: 2 x 7.5 kW geared motors o Screen body: Polyurethane (star screen) D 166 / 12 fingers o Screen shafts as a plug-in system (easy and cost-effective adaptation to other grain sizes) o Bearing lubrication positioned externally; optional central lubrication available at an extra cost Pgsdjg I Uqfopfx Aazot

Year of construction: 2025, condition: new, machine/vehicle number: Neu, Description:  Screening system consisting of 1 screen deck for separating green waste / biomass with a particle size of 0-80 mm.  Capacity up to 150 m³/h (material-dependent).  Material separation into 2 fractions: 0-80 mm and oversize.  Screen deck with enclosure and extraction for film particles.  Extraction point is adjustable.  Suction and conveying fan positioned beside the unit in a frame, with a hose diameter of 300/350 mm. Technical data:  Screen deck 1: Screen deck area, length = 6,360 mm; width = 1,215 mm o External dimensions: length = 6,690 mm; width = 1,850 mm o Screen area 5.1 m², number of shafts 24 o Drive: 2 x 7.5 kW geared motors o Screen body: polyurethane (star screen) D 340/9 fingers Pgjdpfx Aaed Rbnqozst o Screen shafts as a plug-in system (adaptation to other particle sizes is easy and cost-effective) o Bearing lubrication via central lubrication system 24V (without control; must be integrated into the system control).  Suction and conveying fan o Drive: 1 x 15 kW (optional control via frequency converter; not recommended as part of the offer). o Optional: with knife attachment. Delivery time approx. 18 to 20 weeks.

Condition: new, weight max. 5,0 t workpiece diameter 250 - 2500 mm total power requirement 0,75 kW load capacity drive unit max. 2500 kg load capacity rotating unit max. 2500 kg weight of the machine ca. 0,9 t The self-adjusting D-HGZ roller blocks adapt to the different Diameters of your workpieces yourself. This roller block is for special designed for heavy-duty activities. Furthermore, this roller block is for Suitable for thin-walled workpieces, as the four wheels per unit are an improved Supply pressure distribution. || Features: | - Electronic components of Top quality | - Infinitely adjustable speed of the drive unit | - Wheels fitted with solid rubber tires enclosed in one Steel construction | - Heavy construction enables very high stability. | - Favorable price-performance ratio enables quick recovery Your investment. | - The D-HGZ series is supplied as a standard version and includes a remote control with digital reading. || Accessories: | - double Psdpsgvkpfefx Aazjgt Foot pedal (start-stop / left-right) | - remote control

Condition: used, machine/vehicle number: 2414-0075 bzw. 2314-0703, Tabletop clamping surface: 520 x 1000 mm 6 clamping slots: 16 mm Slot spacing: 90 mm Pgedpfeb Hmbpex Aazst Clamping plate can be rotated horizontally to the right and left by: 45° each Can be tilted towards/away from the machine by: 15° each Can be swiveled to the right and left by: 15° each Permissible load, movable: approx. 1000 kg Permissible load, fixed table: approx. 1500 kg Weight: 376 kg Suitable for DECKEL milling machines: FP 3 L; FP 3 LG; FP 3 LV

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, I am selling this machine. A video of the machine can be sent via WhatsApp. It can be tested while connected. Very good condition. X 11,500, Y 3,150, Z 2,000, clamping M 100 Includes a support column, 6 pieces of boards with dimensions 6,500 x 1,850 x 400 mm. Rotary table E 20. Heads, etc. This is a complete workstation. Weight approximately 200,000 kg. Psdpfxoxwl Tbo Aazogt

Condition: used, Year of construction: 2023, Spreading vane set TS30 right ISOBUS operator terminal AmaTron4 ArgusTwin for / ZA-TS WindControl for ZA-TS Hydro GPS-Switch basic for AmaTron4 SpreaderConnect / for ZA-TS Drive Hydro left with AutoTS Drive Hydro right with AutoTS / main disc left Pedpfxot Nf Dqs Aazsgt

Condition: excellent (used), Year of construction: 2000, An inclined conveyor with steel hinge plates. Last loaded with a wheel loader and a dump truck. Overall length: 9.6 m Size of the feed hopper: 8.0 x 3.6 m Width of the conveyor at the bottom: 1.85 m Maximum width with drive: 3.2 m Width of the conveyor belt: 1.3 m Overall height: 5.3 m Belt speed: 0.05 - 0.29 m/min Conveyor chain: FV 315 with bushing and idler roller Throughput: 3 to 14 m³/hour Gear motor, belt, SEW: 0.75 kW Pgjdsiwxmbopfx Aazjt Speed: 0.2 rpm Torque: 18000 Nm Speed of the winding shaft: 64 rpm Gear motor, winding drum, Flender: 7.5 kW Total weight: approx. 20 tons A cover belt conveyor / steep conveyor is also available.

Condition: excellent (used), 3000 Kg load capacity welding rotary table, very robust speed infinitely variable from 0,05 to 0,6 rpm Clamping plate square 2200mm bore 190mm, T-slot 70mm Height tilted up to center 1600mm inclination up to 135 length 2,0 m x width 1,4 m hand remote control with digital display Pgedpfx Aasncfwmszet and foot remote control

Condition: used, Year of construction: 1996, functionality: fully functional, Pressure 160 t Bending length 3000 mm Machine weight approx. 16 t Equipment: - Two-hand foot pedal - CNC control Cybelec DNC 800 - Hydraulic upper tool clamping - Hydraulic crowning - Hydraulic lower tool clamping - 5 manually adjustable backgauge fingers - Die displacement Pgjdpfxox A Eucj Aazot - Tool package - Side safety doors - Controlled axes: y1, y2, x, R