3D PRINTER

EOS P396

Condition: excellent (used), Eos EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) The machine has been serviced regularly (last service: 08/2024). It has exclusively processed PA11 (EOS PA1101). The system is offered including accessories: 1 x build box, docking station, multibox with cooler Operating hours: 5,962.3 h "The printer has been equipped with a new IntelliScan III scanner including a laser deflection head and has been thoroughly inspected." For sale is an EOS P 396 with PSW 3.8, a high-precision industrial system for additive manufacturing (Selective Laser Sintering, SLS). The system is suitable for the production of complex plastic components for both series and prototype manufacturing. Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set: PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20°C water / 18°C process water Pump capacity: 5 l/min at 3.5 bar Electrical power: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. charge: 420 g) Multibox is a typical EOS accessory for powder handling, used for transporting and interim storage of material. Technical Data: Laser and Optics: Laser type: CO₂ laser Rated power: 70 W Wavelength: 10.55 – 10.63 μm Laser safety class: 1 (closed) / 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure area: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build chamber: 350 × 350 × 620 mm X-axis (coater): Travel 690 mm, speed max. 200 mm/s Z-axis (build platform): Travel 650 mm, speed max. 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating Systems: Process chamber heating: 3.0 kW, infrared twin tube radiator with pyrometer control Take-off chamber heating: 1.6 kW, resistance heater coil with separate temperature measurement Control & Operation: Process computer with Windows 7 OS 15.1" TFT display, membrane keypad & mouse Ethernet network connection Other: Noise emission: < 70 dB(A) Electrical Data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Rated power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Line protection: 32 A Total weight: approx. 1,400 kg Condition: used Djdpfx Aoxw Uyqoa Njcd Scope of delivery: (see picture) Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox (Specifications and information are subject to change and correction!) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 1998, clamping force: 50 kN, displacement volume: 200 cm³, injection pressure: 2,587 bar, overall weight: 2,500 kg, load hours: 4,500 h, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz delivery time: on request Dedpfx Aswi Uzhsa Necd terms of payment: 100% prior to delivery

Condition: like new (used), Year of construction: 2016, For Sale: EOS P 396 – Guaranteed Working Condition This EOS P 396 was purchased from EOS in 2022 by the previous owner and is now available for resale in fully guaranteed working condition. Before the sale, the machine is thoroughly inspected and revised by our experienced technicians to ensure top performance. The package includes: • 2 build frames • Hydac water cooler Dcodpfx Aotp Up Eja Njd Additional accessories are available upon request. We offer transport in the original EOS packaging and provide professional installation services to ensure a seamless experience. Warranty and maintenance plans are available to suit your needs. For more information or specific requests, please don’t hesitate to contact us. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality refurbished EOS SLS machines and unparalleled support. With our team of ex-EOS technicians, we are the only provider in the market offering a complete solution for used EOS equipment—including installation, maintenance, repairs, upgrades, and consumables. What sets us apart: • Guaranteed reliability: Every machine is inspected and revised before delivery. • End-to-end support: From transport and installation to tailored maintenance plans, we’ve got you covered. • Expertise: With years of experience in the SLS industry, we ensure that your machine runs at its best. • Exclusive offerings: Unique materials, accessories, and service plans designed specifically for EOS users. Choose IM3D for unmatched expertise, value, and service. Feel free to reach out to learn more about how we can support your SLS production needs!

Condition: refurbished (used), Available rubber testing equipment Djdpfx Ajwmnlhja Njcd 1 x Alpha Production MDR Rheometer (optionally in container with pneumatic sample punch) The device has been inspected, calibrated, and equipped with new software on a new tower PC!

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 200 h, The system is located in the BIBUS Austria Democenter and can be inspected and tested at any time. The device can process a total of 14 materials - in addition to common plastics such as ABS, PLA, TPU and Carbon PA, high-performance polymers such as Ultem, Peek, CarbonPeek and Helios-Peek are also available. Four material-dryer are included in the delivery, Payment terms: Cash in advance, excluding transport and commissioning - these costs are charged depending on the location. Djdpjibikwofx Aa Necd

Condition: used, Year of construction: 2008, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: XR203724, number of blades: 36, rotor length: 2,000 mm, rotational speed (max.): 30 rpm, Single-shaft shredder UNTHA XR2000S, currently in operation in a three-shift system for alternative fuel production, available for sale from January 2026. Rotor length 2,000 mm, 36 rotor knives, hydraulic pusher, two 132 kW drive motors, two slip clutches, two gearboxes. Various spare parts are available in addition to the shredder: spare rotor, spare gearbox, spare motor, screen clamping bars, knives, etc. Dcsdpfx Ajwz Ex Usa Njd

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,504 h, Equipment: ABS, compressor, Printer is fully functional and it is still under power. Printer was not used much often only 1504 working hours Dcodpfxjw Imk Ro Aa Ned There are available all model materials licences available in 2019. New PM Kit is on site and it will be installed just before printer dispatch to the new customer Support removal unit type EFT-900 is available

Condition: excellent (used), Year of construction: 2020, New hydraulic heating platen press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control system - Electric heating platens 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating plates: 2 pcs. - Number of levels: 1 - Cylinder stroke: 350 mm Dsdpoxgbxfjfx Aa Njcd - Daylight opening: 350 mm - All-around loading possible - Number of hydraulic cylinders: 6 pcs. - Cylinder diameter: 85 mm - Hydraulic unit power requirement: 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V, 50 Hz - Safety specifications according to CE standard Standard equipment: - Movement of the press table with rack-and-pinion and parallel guides at 2 corners of the press table made from self-lubricating material - Electronic control unit with touch screen for machine control and monitoring - Digital timer for adjusting pressing time and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for adjusting pressing time - Digital diagnostics and fault display - Safety circuit with two-hand operation - Safety pull cord - Safety support for lower press table Accessories included: - Touch Screen TS/400 - EFC electronic flatness control - Gold-anodized heating plates (Busse) Location: Ex stock - Immediately available -

Condition: used, Designation: 3D Printer Selective Laser Melting Machine Manufacturer: SLM Solutions AG Model: SLM 280 HL Build Volume: 280 x 280 x 365 mm (minus substrate plate height) Machine Configuration: Single Optic, 1x 400W Materials Used: (1.4404, 1.2709, L40, AlSi10Mg) Laser Operating Hours: 1500 h Build Rate up to 88 cm³/h: depending on material and part geometry Variable Layer Thickness: 20 μm - 90 μm Minimum Feature Size: 150 μm Focus Diameter: 80 - 115 μm Max. Scan Speed: 10 m/s Average Shielding Gas Consumption during Build Process: 3.0 l/min (argon) Average Shielding Gas Consumption during Flooding Process: 200 l/min (argon) Electrical Connection / Power Consumption: 400 Volt 3NPE, 63 A, 50/60 Hz, 3.5 - 5.5 kW Compressed Air Requirement / Consumption: 60 l/min at 6 bar Machine Dimensions: 2600 mm x 1200 mm x 2700 mm Dcsdowpkcnepfx Aa Nsd Condition: Used item as shown in the pictures. Please contact us if you have any questions. Shipping: The specified shipping costs apply to deliveries within Germany. Worldwide shipping available (please request shipping costs outside Germany). Sale to commercial customers only, without warranty or guarantee. Technical data may vary and errors in the description may occur and are subject to change.

Condition: used, SLM Solutions Type: SLM 500 Build space (L x W x H): 500 x 280 x 365 mm (minus substrate plate height) 3D optics configuration: Quad (4x 700 W) Build rate: up to 345 cm³/h Variable layer thickness: 20 µm - 90 µm, Dcedpfxjv Iff Ns Aa Njd Min. structure size 150 µm Focus diameter 80 µm - 115 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 16 l/min (argon) Average protective gas consumption in the flooding process: 250 l/min (argon) Powder supply with 90 kg Electrical connection / power consumption: 400 volts 3NPE, 63 A, 50/60 Hz, 8-5.5 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 6080 mm x 2530 mm x 2620 mm Machine weight (without / including powder): kg, kg with powder Was operated with aluminum AlSi10Mg! Laser hours: 1689 h Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.