Drilling Machine

ERLO GP.32

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. Nedpfxoudi Uno Aazslg The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Technical data TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Condition: new, measuring length bis 5700 mm Tube length 6000 mm numbers of toolholders 7 Rohr Edelstahl dimensions 6,0 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: Njdpfsfv Atlex Aazjlg This is just the stop system without roller conveyor!

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: TH241-14/433886, operating hours: 131 h, ABUS ELV crane system crane runway bridge crane indoor crane crane Load capacity / lifting capacity: 5t - 5000 kg Gauge: 13,500 mm, overall width approx. 13,700 mm Year built: 1999, with floor control Lifting height: 6 m Overall height from crane top edge to hook approx. 1,020 mm (Girder: 540 mm + lifting gear: 480 mm) End carriage length with buffers approx. 270 cm SWP: Full load hours used: 131, theoretical remaining service life: 1,469 hours Crane is dismantled and immediately available Very good condition, inspection book is available Column-mounted slewing cranes and wall-mounted slewing cranes also available Nljdpfsx Ev Tkox Aazsg Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipment by freight forwarding possible, please inquire with postal code Collection preferred

Condition: used, Year of construction: 2006, DOOSAN DAEWOO PUMA 240 Lathe YEAR OF FIRST INSTALLATION: 2007 CNC FANUC Series 21i – TB IMPECCABLE MACHINE Nljdjyuqacopfx Aazsg LIKE NEW, CONNECTED ANY TEST POSSIBLE CHUCK DIAMETER: 220 mm MAX. SWING OVER BED: 550 mm MAX. SWING OVER CARRIAGE: 390 mm MAX. TURNING DIAMETER OVER BED: 350 mm MAX. TURNING LENGTH FROM CHUCK: 562 mm BAR CAPACITY: 65 mm SPINDLE SPEED: 45 – 4,500 RPM SPINDLE MOTOR POWER: 15 / 18.5 kW TRAVELS: X: 242 mm Z: 580 mm TOOL TURRET: 12 POSITIONS CHIP CONVEYOR TOOL PRESETTER COMPLETE WITH ALL DOCUMENTATION

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 28 mm throat: 285 mm bore stroke: 165 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 3 spindle speed:: 65 - 1.750 / 4x steples U/min feed: 0,1; 0,2; 0,3 manuell/automatisch mm/U Distance spindle/table max.: 80 - 680 mm table clamping surface:: 500 x 370 mm table rotating: 360 ° drill table adjustment: 600 vertical mm Nledpeu Idkzjfx Aazsg column diameter: Ø 130 mm total power requirement: 7,5 kW weight of the machine ca.: 273 kg dimension machine xH: 0,9 x 0,6 x 1,9 m The machine can cut threads, change of direction left/right selectable via foot switch and/or depth stop Table can be swiveled and adjusted in height. *

Condition: new, Precision, quiet, and reliable drill press. Built according to strict safety standards. Precision spindle with hardened Morse taper and machined base plate. Nodpfx Aasir Aihjzjlg Electronic speed control included. Rotating table + vise, 350 x 250 mm. Drilling capacity in steel: R50 mm, ø 22. Tapping capacity in steel: R50 mm, M14. Spindle taper: CM2. Spindle stroke: 90 mm. Spindle bore diameter: 52 mm. Column diameter: 98 mm. Distance from column to spindle center: 201 mm. PU transmission. Electronic speed control (E). Spindle speed: 270 ÷ 4,200 rpm. Motor power: 0.75 kW / 220 V, single-phase. Dimensions (h x w x d): 1950 x 600 x 680 mm. Weight: 220 kg.

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Nedpfjxf Ikfsx Aazelg

Condition: used, Year of construction: 1988, Technical details: pressure: 10 t workpiece diameter - max.: 40 mm threading length: 70-80 mm workpiece diameter min/max: 3 / 40 mm Nljdew D Aq Tepfx Aazog revolution per minute: 47-94 U/min feed speed: 0,5 - 6 mm/s work stroke: max. 7 mm total power requirement: 4,68 kW Weight approx.: 1,4 t dimensions of machine: 1,4 x 1,4 x 1,7 B T H m dimensions of hydaulic: 0,8 x 1,2 m Hydraulic drive manual and automatic cycle adjustable roller speed max. thread diameter 40mm min. thread diameter 3mm up to 3.5 mm pitch max. pitch 1.75mm roller width min. 80 mm max. 120mm shaft speed 47-94 roller shaft diameter 40 various rollers as accessories *

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): 40,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Tank volume: 40,000 liters / 40 m³ Length: approx. 8,720 mm Diameter: approx. 2,500 mm Weight approx. 6,600 kg Material: steel material S 235 JRG 2 The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick. The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Njdpfjvmz Idex Aazolg Trade-in and purchase of tanks/containers is possible, just talk to us about this. We of course always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Condition: used, Year of construction: 1968, Technical details: bore capacity in steel (diameter): 40 mm throat: 380 mm bore stroke: 240 mm spindle taper MT: MK 5 spindle speed:: n.b. U/min feed: 01 / 0,14 / 0,2 / 0,28 / 0,4 (manuell+automatisch) mm/U Distance spindle/table max.: 200 - 800 mm table clamping surface:: 540 x 730 mm table rotating: 360 ° drill table adjustment: 600 (manuell) mm column diameter: Ø 220 mm base plate surface area: B: 510 x L: 510 mm total power requirement: 4,0 kW weight of the machine ca.: 1300 kg Nlodpevpfzyefx Aazog dimension machine xH: 1,2 x 0,95 x 2,35 m Operation via control panel and/or foot switch Mechanical thread cutting incl. vice *