Press brake

Ermak Blecken PPE SE 3260

Condition: good (used), functionality: fully functional, Year of construction: 2003, working width: 4,300 mm, throat depth: 450 mm, distance between stands: 3,700 mm, operating speed: 120 mm/s, reverse speed: 120 mm/s, back gauge: 550 mm, overall weight: 21,500 kg, total length: 5,100 mm, total width: 2,000 mm, total height: 3,300 mm, pressing force: 300 t, Equipment: safety light barrier, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Chjdpfx Afswc Sbrsljf Machine weight: 21.500 kg

Condition: excellent (used), Year of construction: 2012, Technical Data: Working length: 4100 mm Distance between uprights: 3550 mm Press force: 300 tons CNC control: DELEM EPC-3D Controlled axes: Y1/Y2; X; R; Z1/Z2 Hydraulic tool clamping top and bottom: WILA system CNC crowning Stroke: 550 mm Throat depth: 405 mm Installation height: 620 mm 2 bending aids Angle measuring system Motor power: 30 kW Laser monitoring Table height: 980 mm Dimensions (L x W x H): approx. 5550 x 2950 x 3400 mm Chedpfx Afsxdt Umslef Weight: approx. 24.5 tons Accessories: Manual tool changer Segmented bending with step-by-step support of the bending aids (segment bending) 1 set of tools Condition: Very good condition The seller assumes no liability for typing or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, functionality: fully functional, Year of construction: 2025, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP Chedpfxjt Akt Re Aflof

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, control type: CNC control, actuation type: hydraulic, controller manufacturer: Triumph, controller model: TASC 6000, bending force (max.): 230 t, stroke length: 445 mm, Machine type: Hydraulic press brake Manufacturer: Trumpf Model: TruBend 5230 Pressing force: max. 2,300 kN Bending length: 4,250 mm Stroke: max. 445.0 mm Operating pressure: max. 300 bar Cedoxf Um Tspfx Aflehf Overrun time: max. 95 ms Overrun distance: max. 10.0 mm Safety distance: min. 190.0 mm Machine weight: 19,200 kg Control: TASC 6000 Backgauge: 4-axis Upper tool clamping: hydraulic Lower tool clamping: hydraulic Lower tool displacement: pneumatic

Condition: good (used), Technical specifications: Chsdpfjwchn Usx Afljf Working length: 2100 mm Max. bending capacity: 10.0 mm Pre-bending: 8.0 mm Top roller diameter: 200 mm Bottom roller diameter: 180 mm Number of driven rollers: 3 Hydraulic folding bearing Conical bending device Extended rollers for profile bending Control panel with digital display Motor power: 5.5 kW CE mark Dimensions (length x width x height): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tons Accessories: Several roller sets for pipe and profile rolling The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, turning height: 1,020 mm, workpiece weight (max.): 10,000 kg, turning diameter: 1,560 mm, faceplate diameter: 1,480 mm, rotational speed (max.): 250 rpm, Titan VT 1700 Vertical Lathe with: - table diameter 1480 mm - maximum turning diameter 1560 mm - maximum load allowed in the spindle 10000 kg - maximum turning height 1020 mm - 12-position tool magazine - Fagor 8055 CNC - Rotomors 4-jaw hydraulic chuck Chsdpfx Afswi Ufmolef - chip conveyor - year 2016 Free extension in 12/24 months

Condition: used, functionality: fully functional, Year of construction: 2007, working width: 4,250 mm, type of crowning: CNC-controlled, overall weight: 16,000 kg, total length: 6,000 mm, total width: 1,700 mm, total height: 3,000 mm, - Press beam operating hours: 9,874 h - Stroke: 600 mm - Force: 1,700 kN - Working length: 4,250 mm - 5-axis backgauge - CNC crowning - Hydraulic tool clamping (top/bottom) - Die adjustment for hemming - CNC-controlled bending aid - Bendguard safety device Csdpfx Ajxcxy Seflohf - ACB angle measuring sensor

Condition: used, Year of construction: 2009, x-travel 3.000 mm y-travel 2.500 mm z-travel 2.475 mm w-axis 800 mm rotary table Juaristi MG-12 Rotary table surface 2.000 x 2.500 mm T-slots 11 T-slot - width 170 mm table weight 8.000 Kg table rotation B- Achse – 0,001 ° Control HEIDENHAIN i TNC-530 diameter of quill 130 mm speed 3.000 U/min tool taper ISO 50 DIN 69871/1-B swivelling +/- 2,5/2,5 Grad spindle drive 30 kW transmission ratio 2 speeds: 0-2.500 U/min boring spindle D`ANDREA UT5-800-S mm/min diameter 800 mm cross travel 250 mm Tools changer 30 pos. Internal cooling system 20 bar Chip coveyor Inkl. handwheel HEIDENHAIN HR-420 weight of the machine ca. 45 t dimensions of the machine ca. 9.800 x 7.320 x 5.500 m -TS-3 head, TS-5 column and longitudinal bed INCLUDED: - Part touch probe RENISHAW RMP-60 Chjdou D I R Dopfx Afljf - External coolant - 20 bar Internal coolan - protecting guards - mobile operator platform for control panel - Chip Conveyor - Handwheel HEIDENHAIN HR-420

Condition: used, Technical details: faceplate diameter: 1000 mm swing diameter: 1600 mm turning height: 1200 mm main drive: 75 kW faceplate speeds from - to: 7 - 800 U/min milling motor: 25 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 mm ram head dimension: 240 x 240 mm weight of the machine ca.: 40 to dimensions of the machine ca.: 9 x 7,8 x 6,0 m Machine general overhould in 2004 and equiped with Siemens 840 D control - tool changer rack magazine - C-axis, live tooling, - Transmit function electronical Y-axis - angular milling head Chjdpevb Dcaefx Aflef - complete splash housing - coolant device, chip conveyor *

Condition: not inspected (used), Press brake Darley Type EHP 260.43/37 year of construction 1992 converted to Delem control DA-56s Without light barriers, does not comply with current UVV regulations CNC back gauge Pressing force 2600KN Motor power 18.5 KW Working width max. 4300mm Codpfxouhf Tze Aflshf throat 300mm Weight approx. 23,000kg The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals!