Hydr. pressbrake
ERMAK POWER BEND PRO 20.60

Name: ERMAK POWER BEND PRO 20.60
Brand: ERMAK
Availability: InStock

Condition

New

Location

Ahaus

Hydr. pressbrake ERMAK POWER BEND PRO 20.60

Show map

Machine data

Machine type:: Hydr. pressbrake

Manufacturer:: ERMAK

Model:: POWER BEND PRO 20.60

Condition:: new

Price & Location

Location:: Ahaus

Call

Details about the offer

Listing ID:: A19924040

Reference number:: 1125-8303217

Update:: 05.09.2025

Description

pressure 60.0 t
chamfer lenght 2100 mm
distance between columns 1700 mm
column arm 410 mm
ram stroke speed 160 mm/sec
work speed 10.0 mm/sec
return speed 165 mm/sec
work stroke 275 mm
dayligth 530 mm
table height 900 mm
table width 90.0 mm
oil volume 150 ltr.
voltage 400 Volt
total power requirement 7.5 kW
weight 5640 kg
range L-W-H 3250 x 1960 x 2750 mm

-----
Press brake with special equipment
Godpfx Aoxabckeadsin
* increased installation height
* increased cylinder stroke
* as well as increased bending beam speeds
-----

Furnishing:
- DELEM CNC control model DA 53T (touchscreen)
- Motorized backgauge with R-axis, on recirculating ball spindles
- X = 800 mm R = 250 mm with 2 stop fingers
- controlled axes Y1 - Y2 - X - R - C (crowning)
- electr. Crowning controlled by CNC
- Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp
- Additional crowning device in the tool holder of the upper tool
- 4V universal die block M 460 R with die shoe 60 mm holder
- BOSCH / HOERBIGER hydr. Components
- SIEMENS electrical system
- LEUZE light barrier behind the machine
- FIESSLER AKAS laser with FPSC protective device v.d. machine
- Swiveling control panel, mounted on the left
- 2x front support arms "sliding system", with T-slot and tilting cam
- 1x double foot control
- CE mark / declaration of conformity
- User manual: machine and control in German
- Safety manual: press brakes

Seller

Registered since: 2011

778 listings online

Call

Send inquiry

Telephone & Fax

+49 5939 ... show

Fax:

These listings may also fit your interest.

Listing

Dinkelsbühl

1,170 km

Press brake
Dener AbkantpresseXL30220

Call

Condition: new, functionality: fully functional, Comparable to Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Pressing force 220 t Approach speed 140 mm/s Bending speed max. 10 mm/s Return speed 130 mm/s Stroke 350 mm Installation height 600 mm Throat depth 450 mm X-axis travel 750 mm X-axis speed 300 mm/s R-axis travel 250 mm R-axis speed 100 mm/s Clear gap between frames 2555 mm Machine length 3730 mm Machine width 2290 mm Overall height 3055 mm Table height 820 mm Motor power 22 kW Oil tank 300 l Machine weight 11,500 kg (technical data may vary depending on equipment) Standard equipment: - 3 CNC axes (Y1, Y2, X) - Press beam double-guided, stable and precise - Robust backgauge, double-guided - Manual backgauge fingers, double-guided on linear rails - Movable front arms with height adjustment - Side and rear safety guards - Lower die adapter rail 60 mm - Manual upper tool clamping system (Promecam system) Gijdpfeq D Dzljx Aadsn - Manual crowning - Foot switch with emergency stop - 380 V, 50-60 Hz, 3 phase - LED lighting Including the following options: - Delem DA 66T CNC controller - Fiessler AKAS 2M laser finger protection - FPSC Safety PLC (manual) - X-R axis with servo motors - CNC crowning for high bending accuracy - 2 additional backgauge fingers - Further bending lengths and capacities available with appropriate accessories! -

See details

Listing

Starachowice

1,696 km

Press brake
TRUMPFTruBend 7036

Call

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 30,979 h, machine/vehicle number: B0702A1678, control type: CNC control, bending force (max.): 36 t, working width: 1,020 mm, stroke length: 120 mm, throat depth: 150 mm, distance between stands: 932 mm, installation height: 2,390 mm, operating speed: 25 mm/s, reverse speed: 220 mm/s, number of axes: 6, table height: 955 mm, type of crowning: CNC-controlled, overall weight: 2,600 kg, total length: 1,900 mm, total width: 1,800 mm, total height: 2,390 mm, input voltage: 400 V, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, Machine condition Technical condition: very good, fully operational Used in clean conditions, no structural damage Can be tested and inspected on site Full documentation available for inspection Key features and equipment Bending force: 36 t (360 kN) Bending length: 1020 mm Throat depth: 150 mm Beam stroke: 120 mm CNC control: TRUMPF TASC 6000 / Touchpoint TruBend Backgauge: 6-axis (X, R, Z1, Z2, Y1, Y2) Working speed: 25 mm/s Rapid return speed: 220 mm/s Technical data Godpfxjx Apgvs Aadsin Distance between stands: 932 mm Installation height: 2390 mm Table height: 955 mm Rear stop range X: 600 mm Z-axis range: 0–1020 mm Weight: 2600 kg Installed power: 7 kW Power supply: 400 V

See details

Listing

CNC press brake, die bending machine with 8 axes, AMADA PROMECAM, folding machine, press brake. AMADA HFBO 50 x 2000

Hessisch Lichtenau

989 km

CNC press brake, die bending machine with 8 axes, AMADA PROMECAM, folding machine, press brake.
AMADAHFBO 50 x 2000

€16,000

fixed price plus VAT

Call

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Giodpfow Iq Ugox Aadon Good condition

See details

Listing

Ahaus

779 km

Hydr. pressbrake
AMADAHFE 50-20

Call

Condition: used, Year of construction: 2001, pressure 50.0 t chamfer lenght 2090 mm distance between columns 1665 mm column arm 400 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 92.0 mm/sec stroke 200 mm table height 910 mm dayligth 470 mm Number of working hours 36.160 h total power requirement 6.0 KW weight of the machine ca. 4850 kg range L-W-H 3458 x 2450 x 2450 mm with only approximately 36.160 operating hours (!!) - Inspected condition - Machine video - ?v=x8Z0h2_wA6s Equipment: - CNC electro-hydraulic press brake - CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) * CNC-controlled backgauge adjustment (X-axis) * CNC-controlled vertical adjustment of the stop fingers (R1+R2) * CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) * Hand control unit for manual axes movement * Pivoting control, front left - AMADA/PROMECAM quick clamping system for the upper tool * 1 split set of offset upper tools (UKB 10.512) Giedpfxjxabuts Aaden - AMADA/PROMECAM bottom tool holder * 1x split set of 1-V dies (UKB 20.810) - Side guards (hinged doors) - Rear guards (hinged door) - CE marking - 1x freely movable double foot switch - Operating instructions (PDF)

See details

Listing

Contamine-sur-Arve

1,236 km

Swiss-type cnc lathe
STARSE-12B

Call

Condition: used, TECHNICAL DETAILS - Number of axes : 4 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 13 [mm] - Spindle speeds : 10'000 [rpm] COUNTER-SPINDLE - Z stroke : 140 [mm] GUIDE BUSH HOLDER 1 - Number of positions : 5 SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY Gijdpfxouhaxxj Aadjn - Supply voltage : 3 x 380 [V] - Total installed power : 3.5 [kVA] EQUIPMENT - CNC : Fanuc 21iT - Parts catcher - Coolant tank * with high-pressure pump - Bar loader : LNS Alpha 320

See details

Listing

Enschede

760 km

Ring & profile bending machine
OSTASOPK-85

Call

Listing

Szymiszów

1,541 km

Press brake
Micoda60 T x 1250

€6,500

EXW fixed price plus VAT

Call

Listing

Schmölln

1,163 km

Coil line
SCHLEICHER

Call

Condition: used, material width 300 mm coil weight 3 t material thickness 2 - 4 mm Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160 - band width 300 mm - band thickness 2 – 4 mm - cross cut 1200 mm² - voltage 220/380 V 50 Hz - total power requirement 3,1 kW coiler with press roll, Make Schleicher, Type H-3 - Coil weight 3 t - Band width 400 mm - voltage 220/380 V 50 Hz - total power requirement 3,92 kW Gsdpfx Aecdrmmoadoin without control

See details

Listing

Sheet metal processing center Salvagnini P4-3125

San Vito

1,528 km

Sheet metal processing center
SalvagniniP4-3125

Call

Listing

Panel bending machines Prima Power BCe SMART 2220

Vilnius

1,821 km

Panel bending machines
Prima PowerBCe SMART 2220

Call

Condition: excellent (used), Year of construction: 2016, For sale: Prima Power BCe Smart 2220 (2016) panel bending machine. Main advantages: Servo-electric technology – up to 60% lower energy consumption and up to 70% lower maintenance costs High bending quality and precision Godpfjxfiw Tex Aadoin Compact layout, operator-friendly design Semi-automatic operation, manual sheet loading/unloading Equipped with a safety system: laser scanners, light curtains Technical specifications: Max. bending length: 2250 mm Max. sheet length: 2850 mm Max. sheet width: 1500 mm Max. panel diagonal: 3000 mm Max. bending height: 204 mm Bending force: 32 t (320 kN) Pressing force: 52 t (510 kN) Processable steel thickness: up to 3.0 mm Minimum thickness: 0.5 mm Average power consumption: 4.0 kWh Additional equipment and features: Software: Master BendCam 2D, Tulus HMI Tool library, visual simulation of the bending process Remote diagnostics, user-friendly control interface Lowerable work surfaces – convenient parts handling Year: 2016 Condition: Used, well-maintained, connected, can be seen in operation. If you have any further questions, we will be happy to answer them.

See details

Advertise here