Press brakes Ermaksan Speed-Bend PRO 3100x175 2022

Ermaksan

Condition: used, Year of construction: 2005, Used 3.6-meter CNC press brake by Ermaksan Type: AP 3600 x 200 Capacity: 3600 x 200 tons Dsdpfszh Icyjx Abrekp Elgo NC control system 1 set of tooling Year of manufacture: 2005

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Year of manufacture: 2008 Machine weight: 19500 kg Machine height: 3250 mm Machine length: 5350 mm Machine depth: 2450 mm Control system: ER 70 Travel range, X-axis: 750 mm Press force: 300 tons Working length: 4100 mm Column spacing: 3550 mm Dkjdpfjzhn Nasx Abrop Upper support: BBombering: CNC

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: SN201000003, control type: CNC control, degree of automation: automatic, actuation type: pneumatic, controller model: FANUC Series 16i-LB, laser type: CO₂ laser, laser source manufacturer: FANUC, laser source model: FANUC LASER C4000i-B / C4000i Model B, laser hours: 13,443 h, laser power: 4,000 W, laser wavelength: 106 nm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 300 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 300 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning speed: 170 m/min, positioning accuracy: 0.1 mm, input voltage: 380 V, type of input current: three-phase, type of cooling: water, overall weight: 19,500 kg, total length: 6,000 mm, total width: 2,500 mm, total height: 2,000 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, For sale: CNC CO₂ laser ERMAK / ERMAKSAN LASERMAK 4000.3 x 1.5 – 4 kW Used CNC laser cutting machine for sheet metal, ERMAK / ERMAKSAN LASERMAK 4000.3 x 1.5, is for sale. The machine is equipped with a FANUC CO₂ laser source C4000i-B, 4 kW, and a FANUC Series 16i-LB CNC control system. The laser has a working area of approximately 3000 x 1500 mm and is suitable for cutting carbon steel, stainless steel, and aluminum, depending on the material, thickness, gases used, and machine settings. The machine is equipped with the following main peripheral units: Thermotec chiller, Metal Working srl suction/filtration system, Atlas Copco dryer/air preparation system, and Precitec cutting head. It has an exchangeable/movable table for easier loading and unloading of sheet metal. The machine features two loading tables. Main technical data: Manufacturer: ERMAKSAN MAKINA SANAYI TIC. A.S., Turkey Model: LASERMAK 4000.3 x 1.5 Type: CNC CO₂ laser cutting machine Working area: approximately 3100 x 1500 mm Laser source: FANUC LASER C4000i-B Laser power: 4000 W / 4 kW Max pulse peak power: 5000 W Dsdpfx Aboziluierokp Control: FANUC Series 16i-LB Axes: X-Y-Z-U-V Maximum positioning speed: 170 m/min Power supply: 380 V Electrical consumption: 75–90 kW Dimensions: 5285 x 10480 x 2040 mm Weight: 19,500 kg Cutting head: Precitec Chiller: Thermotec LJ45A35 Suction: Metal Working srl UNIT-POLYGONAL Dryer / air preparation: Atlas Copco CD 25+ Serial number: SN20100003 Laser source production: FANUC, Japan, May 2011 Maximum cutting thicknesses: Carbon steel: up to 20 mm Stainless steel: up to 12 mm Aluminum: up to 8 mm Additional equipment: Thermotec LJ45A35 chiller Metal Working srl suction/filtration system Atlas Copco CD 25+ air preparation/dryer system Precitec cutting head FANUC Series 16i-LB CNC control system FANUC CO₂ laser source C4000i-B Exchangeable/movable table Condition The machine is available and can be inspected on-site. It is sold in its current condition, with all the equipment included. It is suitable for manufacturers of metal products, metal structures, sheet metal components, and companies looking for a powerful CO₂ laser with a large working area. Inspection is possible by prior arrangement.

Year of construction: 2016, condition: ready for operation (used), - USED - 4-AXIS SYNCHRONIZED CNC PRESS BRAKE AXIS: Y1 - Y2 - X - R BENDING LENGTH: 2100 mm TONNAGE: 60 ton THROAT DEPTH: 410 mm DISTANCE BETWEEN UPRIGHTS: 1700 mm Dsdpfoxn U Rqjx Abrskp UPPER BEAM TRAVEL: 275 mm CONTROL UNIT: DELEM DA58 WEIGHT: 4560 Kg OVERALL DIMENSIONS: 3250 x 1960 x 2750 mm

Condition: excellent (used), functionality: fully functional, Cutting Length 6100mm Cutting Capacity 25mm Angle 0.5-2.5 Strokes per minute 3-5. Dkjdpjygd Aujfx Abrep Number of hold downs 36 Blade gap 0.005-3.00 Throat Depth 500mm

Year of construction: 2006, condition: ready for operation (used), overall weight: 17,000 kg, total width: 2,450 mm, total height: 3,300 mm, pressing force: 306 t, product length (max.): 4,550 mm, number of axes: 3, Hydraulic press manufactured in 2006. This ERMAK CNC HAP 3100x300 features a pressing force of 300 tons and a bending length of 3100 mm. It is equipped with a high-precision Cybelec CNC control system and a robust steel frame construction, making it suitable for large and thick sheet metal bending. If you are looking to get high-quality bending capabilities, consider the ERMAK CNC HAP 3100x300 machine we have for sale. Contact us for further details. • Control system: Cybelec CNC • Drive system: Hydraulic • Main motor power: 22 kW • Working speed: approx. 80–100 mm/s • Rapid approach speed: approx. 100 mm/s • Key features: • Heavy-duty industrial CNC press brake • High-precision Cybelec CNC control system • Robust and rigid steel frame construction • Suitable for large and thick sheet metal bending • Ideal for industrial production and heavy steel fabrication Technical Specification Dkedpfx Aozcbypjbrsp Bending Length 3100 mm

Year of construction: 2011, condition: like new (used), Universal Grinding Machine from Chevalier apply for toolmaker , mold maker, education and Locksmith Dkjdpfx Aboiitwnjrjp Pressure: 60.0 t Square steel: 35.0 mm Pressure: 60.0 t Square steel: 35.0 mm Angle steel: 120x120x12 mm Round steel: 40.0 mm Punching cross-section in qmm: Ø28 in 15 / Ø38 in 11 mm Throat: 220 mm Flat steel: 200x20 / 300x15 mm Blade length: 317 mm Oil capacity: 45,0 ltr. Working height: 940 / 1140 mm Strokes per minute: max. 26 Working stroke: 55,0 mm Total power requirement: 4.0 kW Machine weight approx.: 1425 kg. Dimension HxWxD: 1510 x 590 x 1570 mm

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 8,451 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 170 mm, operating speed: 10 mm/s, reverse speed: 170 mm/s, table width: 90 mm, table length: 1,270 mm, table height: 850 mm, throat depth: 350 mm, clearance between the columns: 1,050 mm, oil tank capacity: 80 l, total length: 2,150 mm, total width: 1,650 mm, total height: 2,300 mm, overall weight: 3,250 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, safety light barrier, 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake – 6 Axis – Delem DA-66Te Control Used 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Delem DA-66Te graphic control, Y1, Y2, X, R, Z1 and Z2 axes, tooling, laser guards and only 8,451 hours. Manufacturer: Ermaksan Model: Speed-Bend(SB) Pro 1270 x 40 Axes: 6 Year: 2016 Capacity: 1270mm x 40T Control: Delem DA66Te Description 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake, a compact, high-quality 6-axis CNC hydraulic press brake ideal for precision sheet metal bending, fabrication workshops, engineering companies and production environments. This Ermaksan Speed-Bend Pro 1270 x 40 offers a bending length of 1270 mm and a bending power of 40 tonnes. It is fitted with a Delem DA-66Te graphic CNC control, providing a clear touch-screen interface for accurate programming, bend sequence calculation, tooling setup and repeatable production bending. The machine is in very good condition and has completed only 8,451 hours. It comes complete with Euro-style top and bottom press brake tooling, laser guards, foot pedal, quick-release top tool clamps and rear safety doors, making it a well-equipped used press brake ready for immediate inspection and production use. This is a superb opportunity to purchase a late-model, compact Ermaksan CNC press brake with a desirable 6-axis specification, ideal for companies looking for a reliable used hydraulic press brake in Ireland, the UK or Europe. Key Features Manufacturer: Ermaksan Model: Speed-Bend Pro 1270 x 40 / SB PRO 1270-40 Year: 2016 Type: CNC hydraulic press brake Bending length: 1270 mm Bending power: 40 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Delem DA-66Te Graphic CNC Control Hours: Only 8,451 hours Condition: Very good condition Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications – SB PRO 1270-40Model: SB PRO 1270-40 Bending length: 1270 mm Bending power: 40 tonnes Dksdpfx Aszdak Ajbrop Distance between columns: 1050 mm Y-axis rapid speed: 140 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 170 mm/s X-axis travel: 500 mm X-axis speed: 500 mm/s R-axis travel: 250 mm R-axis speed: 350 mm/s Z1 / Z2-axis travel speed: 1000 mm/s Backgauge finger blocks: 2 Oil capacity: 80 litres Motor power: 5.5 kW Stroke: 170 mm Daylight: 387 mm Throat depth: 350 mm Table height: 850 mm Table width: 90 mm Machine Dimensions: 2150 x 1650 x 2300mm Machine weight: 3250 kg Standard / Included Equipment This used Ermaksan Speed-Bend Pro press brake is supplied with: 6 CNC axes: Y1, Y2, X, R, Z1 and Z2 Delem DA-66Te graphic CNC control Euro-style top press brake tools Euro-style bottom press brake tools Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Backgauge finger blocks Sheet support arms Notes: *Specifications are given in good faith but not guaranteed*

Condition: like new (used), Year of construction: 2012, operating hours: 47 h, MACHINE WITH ONLY 47 working hours. Tested by ERMAKSAN FRANCE. COMPLETE DATA CAN BE FOUND IN DOCUMENTS FANUC CONTROL Djdpsrcb Hqefx Abrjkp

Condition: new, Year of construction: 2020, functionality: fully functional, Cnc hydraulic Press Brake Rated Force: 200 tons (≈2000 kN) Maximum Bending Length: 5000 mm Application: Precise bending of steel and other sheet metal Key Geometric Parameters Column Spacing: ~4800 mm, Throat Depth: ~320 mm, Max. Opening Height: approx. 480 mm Stroke (Y-axis): approx. 200 mm Dsdpey It Rxjfx Abrokp Movement and Axes Y1–Y2 axes: Synchronized hydraulic/servo control X-axis (backgauge): CNC-controlled, servo motor R-axis: Height adjustment (optional CNC) (Optional): Z1–Z2 axes (lateral finger positioning) CNC Control – Typical controllers: Delem DA-53T / DA-58T / DA-66T, Cybelec alternatives Functions: 2D/3D bending programming, automatic stroke and force calculation Stop position calculation, tool and material database Main technical components: Hydraulic system: synchronized cylinder pair Automatic crowning: deflection compensation Tool clamping: AMADA-compatible quick clamping Backgauge: CNC-controlled positioning Performance and physical data Main motor: approx. 13,5 kW Weight: approx. 19–20 tons Dimensions: approx. 6100 × 1900 × 2900 mm Technological capabilities (typical): Carbon steel bending: approx. 6–8 mm (at a length of 5000 mm)