Axle stand

FALKEN SLB 5 to. / H 800 mm

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, First installation in 2024 Operating mode: semi-automatic Machine type: horizontal band saw Cut: miter cut Gsdpfxeyxcu Uj Aayobt Miter cutting range: -60° to 60° (L/R) Drive power: 5.5 kW, 3 × 400 V/50 Hz Saw blade speed: 20–120 m/min Saw blade dimensions: 7900 × 54 × 1.6 mm Material loading height: 810 mm Shortest remnant length: 40 mm Smallest saw diameter: Ø 10 mm Sawing capacities: - 0 degrees = round D640 mm, rectangle 820 x 640 mm, square 640 mm - 45 degrees R = round D560 mm, rectangle 560 x 400 mm, square 540 mm - 45 degrees L = round 580 mm diameter, 580 x 560 mm rectangle, 560 mm square - 60-degree R = Round 380 mm diameter, 380 x 250 mm rectangle, 360 mm square - 60-degree L = Round 400 mm diameter, 400 x 530 mm rectangle, 400 mm square Dimensions (L x W x H): 3750 x 2400 x 2700 mm Weight: 2500 kg

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input current: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control system: IMSNC Oxy-fuel cutting table: 3000 x 1500 mm Extraction duct left / right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process control with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source • Operating status and error display via LED and screen • Analog and serial interfaces for adaptation to CNC controllers • Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A • Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise • Adjustable current reduction for cornering, start, and end signals of the guidance system • Automatic display of the preset cutting current • Serial data transmission for PC-based diagnostics Plasma cutting technology: Contour Cut • Further development of HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cutting quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 range 2-4 • Minimal angular deviations and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No tedious post-processing – high productivity and low costs • No additional equipment, software, or new consumables required • Standard equipment Plasma torch PerCut 200/210 • PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting • Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping • Special torches available for special applications • Higher cutting speeds reduce cost per meter • Long service life of consumables conserves resources • Narrower kerf means fewer emissions and less waste • Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip • Lower noise levels due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables Gbedpfsy Nd Hyjx Aayjt • Cutting and marking possible with the same consumables Power source HiFocus 161i Power supply: 400 V; 3 Ph; 50 Hz Max. power input: 28 kVA (100% duty cycle) Main fuse, slow-blow: 50 A Protection class: IP22 Open circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: Max. 50 mm Recommended: 0.5 – 38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma machine torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Condition: new, Year of construction: 2025, power: 7.5 kW (10.20 HP), cutting height (max.): 700 mm, cutting width (max.): 1,100 mm, cutting speed: 80 mm/min, warranty duration: 24 months, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS MECHANICAL - 12 MONTHS ELECTRICAL ROUND MAXIMUM DIAMETER: 700MM Gbjdpfxovzh Dus Aayot RECTANGULAR MAXIMUM DIAMETER: 700X1100MM SQUARE MAXIMUM DIAMETER: 700X700MM STANDARD MOTOR DRIVEN TABLE COLUMN TYPE SEMI-AUTOMATIC VARIABLE SPEED CONTROL PRECISION HEAD LANDING SYSTEM ASK FOR A QUOTE FOR MORE DETAILS.

Condition: used, Year of construction: 2007, machine/vehicle number: 0102-260009, This Voortman VB1050 band saw is designed for the economical sawing of steel profiles up to a profile size of 1000 mm and a profile length of 19,200 mm. This CNC-controlled Voortman VB 1050 bandsaw is equipped with a left/right mitre adjustment, a length measuring carriage and roller conveyors in the infeed and outfeed area for material transport. Working areas: With a 90° saw cut, the working area is 500 mm x 1,130 mm With a +/- 45° saw cut, the working area is 500 mm x 725 mm With a +/- 60° saw cut, the sawing area is 500 mm x 470 mm. Gedeyr Hp Ijpfx Aayjbt Equipped with a band saw blade measuring 9,550 x 54 x 1.6 mm, the band saw enables precise cuts. The machine weighs around 8,500 kg without accessories. A Vacon 110 CNC control system is used to program the Voortman VB1050. An outstanding feature of the Voortman VB series is the movable saw table, where the saw blade and cutting area move synchronously. This ensures that the saw blade never cuts the table and enables stepless rotation for precise cuts. For miter cuts, the table automatically lowers to allow free rotation to the next angle. For recommissioning, a new safety system must be procured and implemented in accordance with the local conditions (hardware & software; not included in the scope of delivery!).

Condition: new, Year of construction: 2025, cutting diameter 650 mm saw band length 8830x67x1,6 mm cutting width 1,6 mm Control halbautomatisch Cutting area - square 650 x 650 Cutting area - flat 650 x 1300 total power requirement 7,5kW / 3100 Nm weight of the machine ca. 5100 kg dimensions of the machine ca. 2100x1550x4450 mm The KSY 650 X 1300is a semi-automatic and column-guided horizontal bandsaw. Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table Gedpfx Aajy S Duisysbt - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Table surface: 7,500 x 2,500 mm Positioning speed: 40,000 mm/min Positioning accuracy: = 0.06 mm/min Repeatability: 0.05 mm/min Machine weight approx.: 2,300 kg MicroStep CNC cutting system of the MG series with the following features: - Hypertherm® XPR170™ plasma power source with automatic OptiMix™ console - Plasma rotator for weld preparation - Fully automatic oxy-fuel torch - Fully automatic drilling spindle MG-40-P26 with 26.8 kW - Steel portal driven and stiffened on both sides for a clear and precise cut - AC servo motors from Panasonic for high drive power and excellent dynamics - Durable and low-maintenance planetary gearboxes - User-friendly machine control - High reliability and long service life, even in three-shift operation - MicroStep iMSNC® machine control with MMI console and 24" touchscreen - iMSNC® module | User management - iMSNC® module | Expert system - iMSNC® module | Automatic calibration of mechanical sensing - iMSNC® module | Visualization of wear parts - iMSNC® module | Assistant for loading CNC programs - iMSNC® module | Management of cutting programs (MRP) - iMSNC® module | EcoInfo - iMSNC® module | MachineInfo - iMSNC® module | Assistant for service and maintenance operations - USB 3.0 connection for storage media - Remote maintenance module MicroStep RemoteDiagnostics® - Remote maintenance access via TeamViewer - Two LCD control units on the portal - Laser pointer with automatic offset transfer - Hypertherm® XPR170™ plasma power source - Industry-leading cut quality - X-Definition - Advanced HyDefinition technology - Automatic gas console | OptiMix™ - CNC interface for the Hypertherm® XPR170™ Connection to the CNC control - Module for automatic power control of the Hypertherm® XPR170™ Gjdpfxozwl Dme Aayobt - Electrical and mechanical torch sensing - Remote activation of plasma power source - Double-sided cable protection (collision protection) of the portal bridge via emergency stop - Extraction table system with oscillating conveyor OXYtrac 2580 HD Main components and dimensions: 1 Table consisting of: 4 table elements WxLxH (mm) 2,600 x 2,080 x 950 Total support area: WxLxH (mm) 2,600 x 8,320 x 950 Contiguously usable working area per table: Vertical cutting: WxL (mm) 2,500 x 8,000 Bevel cutting: WxL (mm) 2,000 x 8,000 Table width (outer): W (mm) 2,830 2 Oscillating troughs L (mm) approx. 8,900 Cutting processes and associated extraction capacity: 1x Plasma max. 170 Amp., bevel cutting 1x Oxy-fuel max. 100 mm workpiece thickness regularly 200 mm workpiece thickness occasionally

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, CNC oxy-fuel cutting machine in very good condition, lightly used. Gsdpfszhby Sjx Aayobt

Year of construction: 2004, condition: good (used), Support stand, assembly stand, steel stand, welding table, assembly table, work stand, heavy-duty support stand, mobile stand, support stand, trestle stand, support stands -Auxiliary stand: Steel stand with spring-loaded chassis -Height: 1910 mm -Load capacity: 15 tons distributed load Gjdpfsy N Dczex Aayobt -Number: 2 axle stands available -Price: for 2 pieces -Dimensions: 1310/1915/H1910 mm/piece -Weight: 263 kg/piece