Roll grinding machine
FARREL 60" x 24" Heavy Duty

Name: FARREL 60" x 24" Heavy Duty
Brand: FARREL
Availability: InStock

Condition

Used

Location

Babberich

Show map

Machine data

Machine type:: Roll grinding machine

Manufacturer:: FARREL

Model:: 60" x 24" Heavy Duty

Condition:: good (used)

Price & Location

Location:: Transito 21, 6909 DA Babberich, Nederland

Call

Technical details

Workpiece weight (max.):: 80,000 kg

Grinding diameter:: 1,580 mm

Grinding length:: 7,500 mm

Details about the offer

Listing ID:: A15540778

Reference number:: 8700

Update:: 15.04.2024

Description

Manufacturer: Farrel
Type: 60" x 24" Heavy Duty
Year of manufacture: 1960

Travelling wheel machine with CROWNING and CONCAVING grinding
Equipped with stones / flanches / lubrication / coolant system

Maximum diameter full size wheel 1550 mm
Work swing over bed 1580 mm
Work load 180,000 pounds (81,000 kg)
Grinding length 7500 mm
Specifications
Metric US Standard
Center height
930 mm
Grinding diameter Ø
1860 mm
Grinding length
7500 mm
Grinding stone dimensions
1080 x 180 mm
Grinding stone speed
400 - 100 rpm
Tailstock
260 x 1250 Mk
Coolant system
Yes
filter
Yes

Dimensions (estimate)
length
13200 mm
width
4250 mm
height
3200 mm
weight
80000 kg
Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Share on

download

Travelling wheel machine with CROWNING and CONCAVING grinding
Equipped with stones / flanges / lubrication / coolant system

Maximum diameter full size wheel 1550 mm
Work swing over bed 1580 mm
Work load 180,000 pounds (81,000 kg)
Grinding length 7500 mm

Center height: 930mm
Grinding diameter Ø: 1860mm
Grinding length: 7500mm
Grinding stone dimensions: 1080 x 180mm
Grinding stone speed:400 - 100Rpm
Tailstock: 260 x 1250Mk
Coolant system: Yes
Filter: Yes
Length: 13200mm
Width: 4250mm
Height: 3200mm
Weight: 80000kg

Aluminum Industry
Gtodpfsr Ikvmox Aadou
Non-Ferrous Industry
Paper Industry
Roll Manufactures
Steel Industry
Plate Mill
Hot Rolling Mill
Cold Rolling Mill

Travelling wheel machine with CROWNING and CONCAVING grinding
Equipped with stones / flanches / lubrication / coolant system

Maximum diameter full size wheel 1550 mm
Work swing over bed 1580 mm
Work load 180,000 pounds (81,000 kg)
Grinding length 7500 mm

Center height: 930inch
Grinding diameter Ø: 1860inch
Grinding length: 7500inch
Grinding stone dimensions:1080 x 180inch
Grinding stone speed:400 - 100Rpm
Tailstock: 260 x 1250Mk
Coolant system: Yes
Filter: Yes
Length: 519.684inch
Width: 167.323inch
Height: 125.984inch
Weight: 176449.6lbs

Aluminum Industry
Non-Ferrous Industry
Paper Industry
Roll Manufactures
Steel Industry
Plate Mill
Hot Rolling Mill
Cold Rolling Mill

Aluminum Industry
Non-Ferrous Industry
Paper Industry
Roll Manufactures
Steel Industry
Plate Mill
Hot Rolling Mill
Cold Rolling Mill

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2008

299 listings online

Call

Send inquiry

Telephone & Fax

+31 316 4... show

+31 316 2... show

Fax:

These listings may also fit your interest.

Listing

Idaho

5,933 km

Cnc lathe
HEMBRUGMikroturn 100 CNC

Call

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Godpfx Aswcfgboadotu Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Additional Backup Hard Drive with Software Fully Loaded and Tested. Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

See details

Listing

C-FRAME eccentric press 250ton AIDA NC2-250 2-POINT ECCENTRIC GAP PRESS 250ton

Tata

1,725 km

C-FRAME eccentric press 250ton
AIDA NC2-2502-POINT ECCENTRIC GAP PRESS 250ton

€85,000

fixed price plus VAT

Call

Condition: like new (used), Year of construction: 1991, functionality: fully functional, table width: 760 mm, table length: 2,700 mm, overall weight: 35,000 kg, pressing force: 250 t, type of input current: three-phase, power: 30 kW (40.79 HP), punching force: 250 t, input voltage: 200 V, Equipment: documentation/manual, safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Gtodju Dxb Tepfx Aadeu Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

See details

Listing

Bevel Gear Cutting Machine Klingelnberg SNC30

Germany

1,034 km

Bevel Gear Cutting Machine
KlingelnbergSNC30

Call

Year of construction: 1987, condition: ready for operation (used), Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible. Gtedpfjrgahxjx Aadeu

See details

Listing

Vertical Turning Machine EMAG VSC 250 DS

Germany

866 km

Vertical Turning Machine
EMAGVSC 250 DS

Call

Condition: used, Year of construction: 2008, Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Gtodpfxeia Rtdj Aadou Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at) or *

See details

Listing

Milling cutter sharpening machine EWAG WS-11

Bienne

1,178 km

Milling cutter sharpening machine
EWAGWS-11

Call

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 176308, Country of manufacture: Switzerland Voltage: 400 / 380 / 50 / 3 Net weight: approx. 350 kg Dimensions: 82x85x156 cm Installed power: max 2 kVA Customs classification: 8460.3930 TECHNICAL SPECIFICATIONS GRINDING WHEEL SPINDLE UNIT Spindle speed (both rotation directions): 2,500 / 3,500 / 5,000 / 7,100 rpm Grinding wheel motor power (2,800 rpm): 0.4 HP Vertical slide stroke (linear): 100 mm Micrometric stop adjustment travel: 25 mm Micrometric stop readout accuracy: 0.01 mm WORKPIECE SPINDLE UNIT Workpiece spindle speed (both directions, continuous): 100–900 rpm Motor power: 0.2 HP Indexing plate teeth count: 120 Angular vernier reading: 20' Collet type: W-20 Horizontal travel: 100 mm Rapid feed per handwheel turn: 2 mm Micrometric feed per handwheel turn: 0.1 mm Micrometric feed per scale division: 0.001 mm SPINDLE HEAD SWIVEL RANGE (a) Main direction: 165° Fixed ratchet increments: every 3° Increments with micrometric screw: every 2' (b) Grinding plane: approx. 15° Stop: at 0° Cross movement range: 80 mm Micrometer travel: 25 mm Reading precision: 0.01 mm Gtjdpow T S Sqofx Aadsu Extraction motor power (2,800 rpm): 0.25 HP All technical specifications provided without guarantee and subject to possible errors or omissions.

See details

Listing

Use centerless cylindrical grinding machine LIDKOEPING 4 B/U

Böhmenkirch

1,175 km

Use centerless cylindrical grinding machine
LIDKOEPING4 B/U

Call

Condition: good (used), Year of construction: 2001, functionality: fully functional, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel rotation speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 tons, space requirement approx. 3.0x1.5 m Gtjdouy Ifgopfx Aadeu The machine will be equipped with a new Siemens S7 control system with new control panel, dressing quill SS electrically controlled via servo motor. Machine will be completely checked, defective parts repaired or replaced. Various options possible (KM system, infeed/outfeed, workpiece rulers etc.)

See details

Listing

Strassberg

1,175 km

Fine blanking press
FEINTOOLHFA 4000

Call

Condition: used, Year of construction: 1996, machine/vehicle number: 7/4986, Capacity: 250 - 400 ton V – Ring nominal force: 20 - 200 ton Counter ram nominal force: 10 - 100 ton Ram stroke: 30 - 200 mm V-Ring stroke: 40 mm Counter ram stroke: 40 mm Max. die size: 765 x 760 x 610 mm Number of strokes: 40 s.p.m. Approach speed: 120 mm / sec Return speed: 135 mm / sec Godpfouqdxiex Aadetu Working speed: 5 - 50 mm / sec Die Weight total: 2400 kg Standard configuration Automation roll-off try with leveller

See details

Listing

Travelling column milling machine SHW PowerSpeed 5 - Heidenhain iTNC 530

Ellwangen (Jagst)

1,169 km

Travelling column milling machine
SHWPowerSpeed 5 - Heidenhain iTNC 530

Call

Condition: reconditioned (used), travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, rotational speed (max.): 6,000 rpm, tank capacity: 1,200 l, SHW Powerspeed 5 Travel paths • X-axis (bed): 10,000 mm • Y-axis (headstock): 1,300 mm • Z-axis (vertical): 2,100 mm Control • CNC control: Heidenhain iTNC 530 Feed rate • X, Y and Z axes: 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head in orthogonal design • Milling head holder swivel range: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 - 6,000 rpm Chip conveyor • Feed length: 10,000 mm Coolant system • Container capacity: 1,200 Liter ATTENTION the images are comparison images About us: Gedpfjv Dhw Tex Aadotu MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization _____ Used machine - used milling machine - used traveling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used milling machine - used CNC milling machine - used drilling and milling machine - used metal milling machine - used metal milling machine - used metal milling machine - used CNC milling machine - CNC milling machines - CNC milling machines - milling machine - large part machining - large part machining - large part machining - CNC large part machining - milling - shw - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine

See details

Listing

Automatic band saw 430 x 430 mm KASTO KASTOtec A4

Babberich

740 km

Automatic band saw 430 x 430 mm
KASTOKASTOtec A4

Call

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A4 Year of construction: 2001 Specifications: Metric Metric US Standard Sawing capacity round 90 Gtedpju R R Avsfx Aadju 430 Sawing capacity flat 90 430 x 430 mm Feed range 0 - 600 mm Multi-feed range 0 - 9999 mm Min, saw length 35 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4800 mm width 2200 mm Height 2200 mm weight 5200 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

See details

Listing

Wiefelstede

785 km

Universal milling head
WaldrichSK50

Call

Condition: good (used), Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: Waldrich -Spare part: comes from a milling machine -Milling head: swiveling -quill stroke: 150 mm Gtjdpfx Aaefxlf Ajdsu -Spindle mount: SK50 -Motor: 11 kW 1470 rpm -Spindle speed: 25 - 560 rpm -Transport dimensions: 1550/600/H460 mm -Weight: 636 kg

See details

Advertise here