Low loader semitrailer

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader

Condition: used, maximum load weight: 37,950 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 02/2026, total width: 2,540 mm, Equipment: ABS, Our entire stock of vehicles, including those available immediately and at short notice, can be found on our website. Excerpt from the specifications. Full list of equipment on request. Gooseneck: * Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load Area: * Telescopic loading area with rear chamfer approx. 1,000 mm x 8° * 1 pair of fixed integrated wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm, as well as widenings in the lower section * Between 1st and 2nd axle, one pair of fixed integrated wheel recesses with cover, approx. 1,610 x 700 x 400 mm (L x W x D) Ihjdpfx Asyc Axyjbvjw * Recess in the chamfer and extending into the loading platform to accommodate the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm (L x W x H) * 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) * 5 pairs of outward folding lashing rings (LC 5,000 daN) * 2 pairs of outward folding lashing rings (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) * Including 3-piece removable galvanized covers over the wheel recess – max. point load approx. 3.5 t/each Axles: * BPW axles and suspension, 2 rigid axles, 3rd axle steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock activated via reverse gear and manually * Air suspension with lift/lower valve * Axle tool Tyres: * Tyres 235/75 R 17.5 3PMSF Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Brake System: * Braking system as per EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel Construction: * Steel structure made from high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer * High-quality two-component (2K) top coat, single-colored in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) Included Accessories: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * Spare wheel bracket in front of the front wall * On the galvanized connector rail at the front, yellow-red air couplings * 4 wheel chocks with holder on the front wall * Receptacle at rear of the gooseneck for aluminum loading ramps * Galvanized folding supports below the rear chamfer of the loading area * Bracket for a beacon at the rear of the trailer * Yellow reflective tape according to EU regulations on the sides, extension, and rear of the trailer * On the gooseneck and rear panel, left and right, a bracket for warning signs including socket * One mud flap at the rear of the trailer * Manual and description on USB stick * On the warning signs, bracket for beacons * European reflective plates (red-yellow) at the rear of the trailer * 80 km/h speed stickers at the rear and on both sides * Load gauge for determining axle loads including load chart * On the gooseneck, plug-in aluminium side walls and tailgate, approx. 2,440 x 400 mm (L x H) * Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) * A tool ...

Condition: new, maximum load weight: 39,670 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Extract from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with hardwood flooring approx. 30 mm thick * Rear of gooseneck in straight design * 3 pairs of lashing rings (LC 5,000 daN) Loading Area: * Extendable loading area * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tension straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering over the axles Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, two rigid axles, two self-steering axles * Air suspension with lift/lower function * Self-steering axles with electromagnetic reverse lock, activated via reverse gear or manually * Drum brakes * Axle tool kit Tyres: * 205/65 R 17.5 * Brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141 * Data transfer to the tractor unit via the standardised EBS interface as per ISO 11992 * For correct display, the tractor unit must be able to transmit and display these data Brake System: * Brake system in accordance with EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Steel Structure: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: * Complete steel structure automatically blasted after welding using a shot blast system * Second blasting with corundum for optimal coating adhesion * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection * Final coating with 2 x 2K topcoat, solid colour in RAL 3002 Carmine Red, according to RAL system 841GL * Wheels in silver * Rear section metallised and painted in RAL 9010 (Pure White) * Metallic paint not available * Paint finish tested with salt spray test according to ISO 9227-NSS * Cavities sealed with special wax Electrical System: Ijdexarlvopfx Abvohw * Electrical system in compliance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights blink together with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch king pin * One spare wheel holder in front of the bulkhead * Yellow-red air couplings at the galvanised connection strip up front * Galvanised folding supports beneath the loading area bevel * One galvanised steel bulkhead (EN12642-XL), approx. 1,600 mm high * On the gooseneck, plug-in aluminium side and rear boards, approx. 2,440 x 400 mm (L x H) * The rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm) * Support bracket with 1 pair of WADER container locks. Fifth-wheel load approx. 20,000 kg * 7 pairs of WADER container locks for 1x 20' container in the loading area * 1x 40' container in the loading area, 1x 40' container on the gooseneck, 2x 20' container * 7 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area * One galvanised bracket running across under...

Condition: new, maximum load weight: 36,360 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Telescopic loading platform with rear slope approx. 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing laths approx. 15 x 15 mm, including extensions at the bottom * Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (width approx. 670 mm) – max. point load 5 t each Iedoyhkq Uepfx Abvshw * Recess in the slope and extending into the platform for accommodating an excavator dipper stick (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of horizontal lashing rings at the front of the platform (LC 10,000 daN) * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) * Cut-outs in the platform's outer frame for attaching tie-down straps (LC 2,000 daN) Two-Piece Steel Ramps: * One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering * Ramps with hydraulically folding ramp sections and hydraulic lifting system, hydraulically adjustable * Maximum load per pair: 40,000 kg Landing Gear: JOST landing gear (mechanical) with 2-speed gearbox, lift capacity approx. 24 t (test load approx. 50 t) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated automatically by reverse gear and manually * Air suspension with lift and lower valve Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer of our choice TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141 Brake System: * WABCO brake system according to EU regulations with EBS-E (2S2M) Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection * Final paintwork with two coats of 2K topcoat, solid RAL 3002 Carmine Red, in accordance with RAL System 841GL * Wheel rims in silver grey Incl. the following additional equipment: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN) * Electro-hydraulic power unit at the rear, under the loading platform * On the gooseneck: plug-in aluminum drop sides and tail board, approx. 2,440 x 400 mm (L x H). The rear galvanized stakes are removable (body length approx. 2,560 mm). * One galvanized toolbox integrated in the gooseneck chamfer * 2 pairs of WADER container pockets on the loading platform for a 20' or 30' container * 3 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the platform * 3 additional pairs of removable galvanized covers over the wheel recess – max. point load 3.5 t each * One removable galvanized intermediate table with 1 pair of WADER container pockets * 1 additional, hook-on intermediate table, approx. 300 mm wide * Intermediate table with offset load ar

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately available and short-term delivery vehicles, on our website. Sample of the equipment. Full equipment details available on request. Neck (Gooseneck): * Gooseneck with front corners bevelled approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Loading area behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear bevel approx. 1,000 mm x 8° * 6 pairs of external foldable lashing rings (LC 5,000 daN) * 2 pairs of external foldable lashing rings (LC 10,000 daN) Ihsdpfx Ajyhkrrjbvjw * 1 pair of internal foldable lashing rings at the central beam front (LC 10,000 daN) * Cut-outs in the outer frame of the platform for hooking in tensioning straps (LC 2,000 daN) * Grating flooring C40/4 (point load approx. 2.3 t over an area of approx. 20 x 20 cm), treadplate flooring over the axles Two-piece Steel Ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t over an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections * Hydraulic lift unit, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 fixed axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock automatic via reverse gear and manual activation * Air suspension with lift and lower valve Braking System: * WABCO braking system in compliance with EU regulations with EBS-E (2S2M) Tyres: Tyres 235/75 R 17.5 3PMSF – make at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallisation of the complete vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) to ensure maximum corrosion protection * Final coating with 2 layers of 2K topcoat, single-coloured in RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver grey Accessories included: * 2-inch king pin * Galvanized steel front wall approx. 400 mm high * Grating in the gooseneck bevel C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * Grating in the platform bevel C40/4 (point load approx. 3.4 t over an area of approx. 20 x 20 cm) * Electric-hydraulic unit at the rear under the platform * Plug-in aluminium side and rear boards on the gooseneck, approx. 2,440 x 400 mm (L x H). Rear galvanized insert stanchions removable. (Body length approx. 2,560 mm) * Electric winch with radio remote control, approx. 5,400 kg lifting capacity, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide roller * Bolted approx. 5 t ring for winch cable loop on the neck without deflection pulley * One galvanized toolbox integrated in the sloped gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t over an area of approx. 20 x 20 cm) * 7 pairs of stanchion sockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the platform * Lift axle on the front axle, controlled by TEBS E depending on actual axle load and current loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Condition: new, maximum load weight: 37,075 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear taper approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood floor approx. 30 mm thick Loading area: * Loading area after the gooseneck hydraulically liftable/lowerable, length approx. 2,800 mm, with rear taper approx. 1,000 mm x 8° * 6 pairs of folding outward lashing rings (LC 5,000 daN) * 2 pairs of folding outward lashing rings (LC 10,000 daN) * 1 pair of inward folding lashing rings at the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tension belts (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over the axles checker plate Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with C40/4 grating (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding in/out ramp sections. Hydraulic lift system, hydraulically adjustable * Maximum load per pair: approx. 40,000 kg Landing gear: * JOST landing gear (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock via reverse gear and manual activation * Air suspension with lift and lower valve Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M) Tyres: 235/75 R 17.5 3PMSF – Manufacturer of our choice TPMS: * TPMS tire pressure monitoring system in accordance with ECE R 141 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final paint in 2 coats of 2K topcoat, solid color in RAL 3002 Carmine Red in accordance with RAL system 841GL * Rims in silver grey Including accessories: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Grating in the gooseneck taper C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating in rear taper of the loading area C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Non-slip sand paint on the checker plates above kingpin and loading area * Electro-hydraulic unit at the rear under the loading area * On the gooseneck: plug-in aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). The rear galvanized drop-in stakes are removable. (Body length approx. 2,560 mm) * An electric cable winch with radio remote control, approx. 5,400 kg pulling force, including approx. 9.5 mm thick steel cable, approx. 24 m long, with cable guide pulley * Bolted 5 t ring for cable winch deflection on the neck without deflection pulley * One galvanized toolbox integrated in the beveled gooseneck with opening for a winch * Grating on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition Iedpfx Absyhkqzovehw * 7 pairs comple...

Condition: used, maximum load weight: 38,440 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2023, next inspection (TÜV): 08/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full specifications available upon request. - Loading area with rear taper approx. 1,000 mm x 8° - One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm - JOST landing legs (mechanical) with 2-speed gearbox rated for approx. 24 t lifting capacity (approx. 50 t test load) - BPW axles and suspension, 1 axle self-steering - Technical axle load: 12,000 kg each - Air suspension with raise/lower valve - Topcoat in solid RAL 3002 carmine red - 2-inch king pin - One galvanized steel front wall, approx. 400 mm high - Electro-hydraulic unit mounted at the rear under the loading area - Load gauge for determining axle loads, including load chart - On the gooseneck: removable ALU side walls and rear wall, approx. 2,440 x 400 mm (L x H) - One galvanized toolbox, integrated in the tapered gooseneck - 6 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area Iedpjxthz Tofx Abvshw - Galvanized extensions, extendable by approx. 230 mm per side - Lift axle on the 1st axle - 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear - 2 LED reversing lights mounted on the rear plate - HRM metallisation (High Resistance Metallisation)

Condition: used, maximum load weight: 39,780 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, first registration: 01/2023, next inspection (TÜV): 01/2027, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt from equipment – full equipment list on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear slope approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Extendable loading platform * 5 pairs of folding external lashing rings (LC 5,000 daN) * 3 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of recessed front lashing rings in the platform (LC 10,000 daN) * Cutouts in the outer frame for lashing strap hooks (LC 2,000 daN) * Hardwood floor approx. 48 mm thick, over axles with checker plate covering Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: * 205/65 R 17.5 twin tyres Axles: * BPW axles, two fixed axles, two air-suspended trailing steering axles with drum brakes and lift/lower function * Trailing steering axles can be locked electronically during reversing via reverse gear or manually Brake System: * Brake system in accordance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Isdpfx Absx Uvlrevohw Steel Construction: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: * First-class, durable anti-corrosion protection on the standard shot-blasted welding frame, ensured by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat, single color, RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 pure white * Wheels in silver Electrical System: * Electrical system according to EU regulations Lighting: * 24 Volt ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch kingpin * Galvanized steel front wall approx. 400 mm high * Spare wheel carrier in front of front wall * Yellow-red air couplings at the galvanized front connection panel * 4 wheel chocks with holders on the front wall * Mounts in the rear area of the gooseneck for ALU ramps * Galvanized folding supports under the rear slope of the loading platform * Bracket for warning beacon at rear of trailer * Yellow reflector tape as per EU regulations on sides, sliding section, and rear of trailer * On gooseneck and rear end, left and right, holders for warning boards incl. socket * Mud flap at rear of trailer * Manual and documentation on USB stick * European reflector signs (red-yellow) at rear * 80 km/h speed stickers at rear and both sides * Acoustic reverse signal * Load manometer for axle load determination incl. load diagram

Condition: new, maximum load weight: 37,150 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, Our entire vehicle inventory, including vehicles available for immediate and short-term delivery, can be found on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: Iodpfjx H Hi Eox Abvehw * Gooseneck with front corners beveled at approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Extendable loading platform: * Extendable loading platform with rear bevel approx. 1,000 mm x 8° * 6 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tie-down straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, with checker plate covering over the axles Landing legs: * JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (test load approx. 50 t) Tyres: * Tyres 235/75 R 17.5 3PMSF TPMS: * TPMS tire pressure monitoring system according to ECE R 141 * Data transmission to the towing vehicle is via the standardized EBS interface in line with ISO 11992. For correct display, the towing vehicle must be able to receive and display this data. Axles: BPW axles and suspension, 2 rigid axles, 1 steered trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock actuated via reverse gear and manually * Air suspension with lifting and lowering valve * Axle tool kit Brake system: * Brake system complies with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Entire steel structure automatically blast-cleaned with turbine blasting after welding * Second abrasive blasting with corundum for optimal adhesion of the coating system * Final painting with two coats of 2K topcoat, single color in RAL 3002 Carmine Red according to the RAL 841GL system * Rims in silver grey * Rear section metallized and painted in RAL 9010 (pure white) * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Electrical system: * Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK UNIBOX at the front terminal strip with sockets 24N, 24S & 15-pin connector according to ISO. 24N ISO 1185, 24S ISO 3731 * 15-pin ISO 12098 Accessories included: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized front connection panel * Mount at the rear of the gooseneck for aluminium loading ramps * Galvanized folding support legs under the platform bevel * On the gooseneck and rear panel, left and right, each with a holder for warning signs including socket * Axle load gauge including load diagram * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H) * The rear galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the beveled gooseneck * 3 pairs of WADER container locks in the load area for a 20' (30') or 40' container * 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the out

Condition: new, maximum load weight: 37,820 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Gooseneck: - Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor covering approx. 30 mm thick Loading area: - 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) - Wheel recesses with square climbing slats approx. 15 x 15 mm and widenings in the lower section - Between the 1st and 2nd axles, a pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized covers over the wheel recesses (W approx. 670 mm) – max. point load approx. 5 t/each - Recess in the chamfer and extending into the loading area for receiving the excavator bucket arm (approx. 2,900 x 750 x 210/290 mm (L x W x H)) - 1 pair of lashing rings, horizontal, at the front of the loading area (LC 10,000 daN) - 5 pairs of flip-out lashing rings (LC 5,000 daN) - 3 pairs of flip-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) One-piece Steel Ramps: - One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering - Ramp with hydraulic lifting mechanism, hydraulically adjustable - Maximum load per pair: 40,000 kg - In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not count towards the vehicle length in the driving position Landing gears: - JOST landing gears (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: - BPW axles and suspension, 2 fixed axles, 1 trailing steering axle Iedpfjw Tpqwox Abvehw - Technical axle load: 12,000 kg each - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool kit Tyres: - Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice - TPMS tyre pressure monitoring system in accordance with ECE R 141. The data transmission to the truck is via standardized EBS interface according to ISO 11992. For correct display, the truck must be able to transmit and display this data Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction: - Steel structure made of high-tensile fine-grain steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations - Lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - Complete steel structure automatically shot-blasted with blasting wheel machine after welding - Second shot-blasting using corundum for optimal coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure maximum corrosion protection - Final painting with 2 coats of two-component topcoat, single color in RAL 3002 Carmine Red, according to the RAL system 841GL - Rims in silver - Rear section metallized and in RAL 9010 (continuation see ori

Condition: new, maximum load weight: 37,635 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment features. Complete specifications available on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick One-piece steel ramps: * One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering * Ramps with hydraulic lifting mechanism, hydraulically adjustable * Maximum load per pair: 40,000 kg In accordance with Regulation 1230/2012/EU, ramps shorter than 300 mm in driving position do not count towards the vehicle length Loading area: * 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm as well as extensions in the lower area * Between the first and second axles, one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D). Includes three-piece removable galvanized covers over the wheel recesses (W approx. 670 mm) – max. point load 5 t/each * Recess in the inclined area as well as projecting into the loading area to accommodate excavator boom (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of lashing rings (horizontal) at the front of the loading area (LC 10,000 daN) Isdpjxtc Ubsfx Abvehw * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN), 2 pairs of lashing rings in the excavator boom recess (LC 5,000 daN) * Cut-outs in the outer frame of the loading area to hook in tensioning straps (LC 2,000 daN) Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, activated via reverse gear and manually * Air suspension with lift/lowering valve * Axle tool kit Tyres: * Tyres 235/75 R 17.5 3PMSF – brand at our discretion * TPMS: Tyre Pressure Monitoring System in accordance with ECE R 141. Data is transmitted to the tractor via standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to receive and display this data Braking system: * WABCO brake system in accordance with EU regulations, with EBS-E (2S2M) and without connection lines to the tractor unit Steel construction: * Steel structure made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24-volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets * Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel construction automatically shot-blasted with turbine blasting machine after welding * Second blasting treatment with corundum for optimum coating adhesion * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red as per RAL system 841GL * Rims in silver * Rear section metallized and painted in RAL 9010 (Pure White) * Paint system tested in salt spray mist test according to ISO 9227-NSS * Cavity sealing with special wax Including the following extras: * 2-inch kingpin * One