Maintenance unit filter control valve

Festo LFR-1/8-D-MNI

Condition: excellent (used), 16 shank mills with indexable inserts Cgodpsdx D Tvsfx Ahvew Manufacturer: Walter Weight: 9.5 kg

Year of construction: 1979, condition: used, throat: 22/29 mm drive motor: bei 380 V ca. 0,55 kW space needed: 450 x 500 x 560 mm weight: ca. 6,5 kg Cedjzif Sjpfx Ahvjgw pressure power: 30 kN

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Cgjdpfxew Rm Sas Ahvjw Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: good (used), Various press brake tools, punches, dies Bending length 2500 + 3050 mm Codow Emf Depfx Ahvegw Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), I sell plasma cutter hypertherm powermax 800 d very good condition. /////Price listed for 1 pc ///// Cjdpfjulc Ixsx Ahvsgw Plasma cutter Hypertherm Powermax 800 Plasma cutter description The Powermax800 plasma cutting system uses an inverter power supply to provide a smooth DC output voltage for superior cutting and gouging of mild steel, stainless steel, aluminum and other metals. The Powermax800's power supply provides a constant output current that varies from 20 to 50 amps, providing optimal performance for all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and cut metals up to 1 inch (25 mm) thick.

Condition: used, Technical details: diameter: 600 mm passage: 250 mm width: 100 mm revolution per minute: 500 U/min weight of the machine approx.: 175 kg 3-jaw chuck with internal jaws flange Ø 730 x 10mm (pitch circle bore Ø 680mm) 1 set of external jaws 1x chuck key Cgedpfx Ahsu N Ez Dsvsw *

Condition: good (used), 1 used single-sided press Make: SACK & KIESSELBACH, year of construction: 1962,74 serial number 31900 Pressing force 630 t, stroke 310 mm Cedpfjul U Svex Ahvegw Installation height 320 mm Working height 1200 mm Drive power 10 KW

Condition: good (used), Year of construction: 1995, roller (top) diameter: 330 mm, sheet thickness (max.): 23 mm, Manufacturer: IMCAR Type: SIHR Year of manufacture: 1995 Extended end for profile bending rolls (Pipe & T-Angle) Central lubrication Digital readout position side rolls Fully hydraulic machine Hydraulic drop end Hardened rolls Specifications Metric US Standard Roll width: 3100 mm Sheet thickness at 3 x top roll Ø: 18 mm Sheet thickness at 5 x top roll Ø: 23 mm Sheet thickness for initial bending: 20 mm Top roll Ø: 330 mm Side roll Ø: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min. Number of driven rolls: 2 Power: 15 kW Dimensions (estimated) Length: 5250 mm Cgodpfx Ahewpku Djvjw Width: 1700 mm Height: 1700 mm Weight: 11900 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend you check all critical details.

Condition: excellent (used), Steel headstock Center height 650 mm Cedpfx Ahsgzhbzevogw Distance between centers 650 mm Height from base 1190 mm The total height can optionally be reduced by 100 mm, and the center height can also be reduced by 100 mm, by removing an intermediate plate. Further details, see image.

Condition: like new (used), Year of construction: 2022, immediately available, warranty 12 months, excellent condition Forced convection oven for solvent-containing materials according to DIN EN 1539, plus 4 loading carts - T max 150°C (can be increased upon request) - Usable volume 1875 liters - Internal dimensions W 1250 x D 1000 x H 1500 mm - External dimensions W 1765 x D 1425 x H 2300 mm - Guide rails, recesses for loading the oven with a loading cart - Maximum permissible amount of flammable materials at 150°C: 83.9 g - Minimum exhaust air volume flow at 20°C: 360 m³/h - KS controller 40-1 for simple temperature control with fixed ramp or dwell times (1 program, 4 segments) - Controller upgrade to JUMO DICON available upon request - Additionally, a simple timer is integrated, which can be started via front buttons - Connection: 30 kVA, 3 x 400 V 57 A 50 Hz - Heating power: 36 kW - Own weight: 820 kg - Available only with 4 loading carts, each with 12 trays and 24 insertion levels, made of stainless steel Cgedpoxbtvfjfx Ahvjw - Documentation, CE declaration - Electrically tested and with a current DGUV test report Inspection in our warehouse by appointment. Oven, furnaces, drying oven, firing oven, heating oven, heating cabinet, industrial oven, solvent oven, annealing oven, heating furnace, tempering oven, drying cabinet, chamber oven, baking oven, convection drying cabinet, convection oven, paint drying oven