Shear/Punching machine

FICEP 604 N

Condition: used, Year of construction: 2001, Cast resin epoxy distribution transformer 630kVA manufactured by TESAR Italy, voltage ratio 10000 ( ± 2 x 2,5 %) /400V, Dyn5 or Dyn11 or Dyn1, IP23 or IP00, forced cooling AF, conductor Al/Al, temperature monitoring unit, functional,available 2 pcs. Hsdpfx Ajquwtxoddefb

Condition: used, Year of construction: 2004, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm Hodjk Hdu Dspfx Addsfb number of spindle speeds: 63 - 3.150 1/min feed stepless: 12-3000 / 6-1500 (Z) mm/min quill stroke: 100 mm milling-head swivable +/-: 90° spindle taper ISO: SK 40 surface area: 630 x 400 mm total power requirement: 8 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2 x 1,9 x 1,95 m universal milling machine with point to point control, mechanical handwheels, swivel - rotary table (mech.) +-45°, hydr. tool clamping, half cabin, coolant device, manuals (German language) *

Condition: new, 3000 mm Working width 360 mm Hfjdpefv Attjfx Addeb Wheel width 360 mm roll diameter 60 mm 900 kg height adjustment 650 - 1100 mm weight of the machine ca. 0,050 t dimensions 3,1 x 0,45 x 0,6 m

Condition: used, Year of construction: 2004, Technical details: current capacity: 630 kVA Voltage primary: 20 kV Voltage secundary: 400 V frequency: 50 Hz voltage: 400 V / Hz rated current: 18,2/24,2 A weight: 2,6 pro Gerät t dimensions L x W x H: 1,7 x 0,82 x 1,66 m This isn't a medium voltage plant! Protection class IP 00 Cooling type AN insulation class F - F with interior insulation Winding material Al / Al Ambient temperature = 40° C Hodpfxev Szwcj Addsfb Application Rated voltage: 1. 21.000 V 2. 20.500 V 3. 20.000 V 4. 19.500 V 5. 19.000 V *

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 2,980 h, load capacity: 3,000 kg, lifting height: 5,625 mm, free lift: 1,890 mm, fuel type: electric, mast type: triplex, construction height: 2,645 mm, fork length: 1,200 mm, empty load weight: 5,500 kg, total length: 2,500 mm, drive type: Elektro, construction width: 1,400 mm, Electric 4-wheel forklift Load center: 600 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Hodpfxourz Scj Addjfb Front tires Type: Non marking Front tires Size: 315/45-12 Front tires Condition: 80 - 100% Rear tires Type: Non Marking Rear tires Size: 180/70-8 Rear tires Condition: 80 - 100% Battery Volt: 80V Battery Ah: 775Ah Battery type: PzS Battery year of construction: 2017 Battery condition: 80 - 100% Sideshift, 3rd valve, 4th valve, Rear working lights, Front working lights, Roof cover, Full free lift, Joystick,

Condition: ready for operation (used), With hydraulic pump. Hjdpfx Adjhw E D Sjdjfb

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Available with distance between centers also 2000 and 3000 mm. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Technical data: Center height 280 mm Max. diameter over bed 560 mm Max. diameter over carriage 360 mm Max. diameter over pocket 770 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50/60 Hz 7.5 kW Coolant pump 400V 50/60 Hz 90 W Hfjdpovbquiofx Addob Dimensions 2500 x 1400 x 1500 mm Net weight 2920 Kg Gross weight 3555.00 kg Accessories included: Self-centering chuck with 3 reversible jaws Ø 320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Condition: new, Center height: 250 mm Swing diameter over slide: 350 mm Swing diameter in the bend: 695 mm center width: 1500 mm spindle nose: DIN 55029, Camlock, size 6 bed width: 305 mm Hfedjgt E Ilspfx Addsb cross slide travel: 272 mm top slide travel: 155 mm spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth thread: (45) 2 - 72 TPI Metric thread: (39) 0.2 - 14 mm Diametrical thread: (21) 8 - 44 D.P.I. Module Thread: (18) 0.3 - 3.5 Module Longitudinal feeds: 0.04 - 1.00 mm/rev face feeds: 0,02 - 0,50 mm/rev motor power: 5,5 kW dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg Features: - Toolmaker accuracy - Infinitely variable speed control (3 preload stages) - Finely balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base frame - Adjustable precision taper roller bearings in the main spindle - Easy-to-operate feed gear with large feed range running in closed oil bath. - Low maintenance central lubrication - Removable bridge. - CE Equipment: - 3-axis digital display (resolution 0.005 mm) - frequency converter - Machine stand with high splash guard rear wall and integrated lighting - Chip tray can be pulled out to the front - 3-jaw lathe chuck - Fixed steady rest - Moving steady rest - Micrometer bed stop - Oil cooler - Two emergency stop pushbuttons and foot pedal with electric braking device - Limit switch protected chuck, rotating steel holder protection and cover of the lead and pull spindle according to the European safety standards CE - Coolant device - Fixed center punch - Reducing sleeve for main spindle - Operating tool in tool box

Condition: excellent (used), Year of construction: 1975, O F F E R We are pleased to offer you, subject to prior sale and errors excepted, the following available ex-stock: DECKEL Universal Tool Milling Machine Model: FP 2 Year of manufacture: approx. 1975 _____ Table travel: - Longitudinal (motor/manual): 390 / 400 mm - Vertical (motor/manual): 390 / 400 mm Hfedpfexzk Irsx Addeb Cross slide travel (motor/manual): 190 / 200 mm Fixed angle table: 250 x 700 mm Distance from spindle to table: 400 mm Spindle overhang: approx. 165–465 mm Spindle taper: SK 40 18 spindle speeds: 40–2,000 rpm Infinitely variable feed range: 5–400 mm/min Rapid traverse: 1,200 mm/min Spindle drive: 2.2 kW Total drive: 2.5 kW - 380 V - 50 Hz Weight: 1,000 kg Accessories / Special equipment: • DECKEL universal swivel angle table approx. 250 x 700 mm, mounted • Original DECKEL universal dividing head with tailstock and faceplates • Original DECKEL high-speed vertical milling head with independent drive • Large original DECKEL tool cabinet for storage of the above accessories and various arbors, approx. 30 collets, various milling tools, additional arbors, etc., as well as operation tools, separate electrical cabinet, coolant system Condition: Very good – demonstration ready, ideal for training workshops/apprenticeship use Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice We always have further DECKEL FP 1 / FP 2 / FP 4 milling machines in stock, as well as accessories such as spiral milling attachments, etc.

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Hfsdpfxev Rpr So Addjb Control: HEIDENHAIN TNC 426 Travel X/Y/Z: 600 x 450 x 500 mm Swiveling table: 900 x 458 mm Renishaw 3D probe Spindle speed range: 20 to 6,300 rpm Tool holder: SK 40 Coolant tank Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm