Pinch roll unit/strip leveller/crop shea

FROEHLING

Condition: used, Year of construction: 1997, tube diameter 60 mm wall strength 6 mm bending radius min. 180 mm total power requirement 5,5 kW Iiedpot I D Uxsfx Afaji weight of the machine ca. 1300 t dimensions of the machine ca. 3500 x 1250 x 1300 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted

Year of construction: 1972, condition: used, machine/vehicle number: 51512/72, pression: 75 t throat: 300 mm table size: 620 x 800 mm clearance hole in the die: 225 x 325 mm table adjustment: 175 mm tappet area: 180 x 475 mm tappet adjustment: 80 mm stroke adjustment: 16 - 140 mm number of strokes: 90 /min engine: 380 V, 3 kW space needed: 1700 x 1200 x 2500 mm weight: 3,3 t Iisdpfxob Tdque Afaei

Year of construction: 1992, condition: good (used), 21 rolls, Ø 80 mm Ijdjg Iirnopfx Afaoii strip width: 500 - 1.650 mm strip thickness: 1 - 5 mm

Year of construction: 1967, condition: good (used), strip width: 300 - 1.250 mm strip thickness: 0,5 - 3 mm Iiedpfx Ajd Ha Irsfaoi blade shaft Ø: 180 mm

Condition: ready for operation (used), Year of construction: 2005, SLITTING LINE MACHINE 4. SLITTING LINE - OME A/A DESCRIPTION CHARACTERISTICS 1 MATERIAL Coils Hot - Cold - Galvanize 2 THICKNESS Hot 1,5-5 mm Cold 1,25-3 mm Galvanize 1,25-4 mm 3 WIDTH COIL 500-1550 mm 4 MAX WEIGHT OF COIL PROCESSING 22τν 5 INTERNAL DIAMETER COIL 500-820 mm Decoiler type Double Cone 6 EXTERNAL DIAMETER COIL 1800 mm 7 INTERNAL STRIPE DIAMETER 508 mm 8 TOLERANCE OF STRIPE 0,2 mm 9 MIN STRIPE WIDTH 41 mm MAX STRIPE WIDTH 1490 mm 11 Number of Tearing / Width 1-2 mm 15 stripes 2-3 mm 9 stripes 4-5 mm 6 stripes 12 Minimum Trimming 1,25-3,85 mm => 10mm (2X5mm) Iodsvupk Aepfx Afajii 4-5 mm => 13mm (2X6,5mm)

Year of construction: 1989, condition: good (used), strip width: max. 1.840 mm strip thickness: 0,3 – 3 mm blade shaft Ø: 224 mm Ijdpfxsg Iih Ns Afaoii blade Ø: 350 mm

Year of construction: 1990, condition: good (used), Offer 20191 Year of manufacture approx. 1990, revision 2002 Technical data: - Bending capacity at 45 kg / mm² up to approx. Ø 25 x 3 mm - Bending angle left + right selectable - Hydr. double sided bending function - Hydr. infeed ° - Drive 400 V / 11 kW - Space requirement approx. W 1750 x H 2200 x D 2300 mm - Weight approx. 1600 kg - with - bending angle adjustment - Hydr. tension - bending tools Isdpfshrdmbox Afasii

Year of construction: 1974, condition: used, machine/vehicle number: P52111974, Item number: MA909 Manufacturer: Ebu Type: SK 75 Year of manufacture: 1974 Machine no.: P 5211974 length [mm]: 1700 width [mm]: 1200 height [mm]: 2450 Weight [kg]: Approx. 4500 Connected load: 380V Stroke [mm]: 16-140 throat [mm]: 300 Punching force [to]: 75 Table size LxW: 800 X 620 Iiodpfxscanfwj Afaoi Machine data: Stroke rate 105 / min Stool adjustment 80mm Table adjustment Control system: Set Up Single stroke foot Continuous run Accessories: Protective screen

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Iiodpfxsif Sg So Afaei Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides - All straightening rolls driven via distribution gearbox and cardan shafts - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2x REXROTH tandem pumps - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Year of construction: 1985, condition: excellent (used), strip width: 10 - 350 mm strip thickness: 0,2 - 2 mm No. of slits/strip thickness: 25/0,5 mm coil weight: max. 1 t Iodpfx Afelilgcjajii