Press brake

GASPARINI XB 100-3000

Condition: used, Year of construction: 2007, Aichi rm04b Bj 2007 / 2009/2010/2011 Weight 630kg LxWxH 78x 130 Fits through a door Equipped with CE+ approval and built-in charger Ready to use and super powerful Djdpfx Aexcgatsnzskr

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. Dkodpsw S Efzsfx Anzsr The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: new, Year of construction: 2026, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Dkedpfx Anomk S Sljzor Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: ready for operation (used), Year of construction: 2010, pressing force: 400 t, stroke length: 400 mm, throat depth: 405 mm, clearance between the columns: 4,050 mm, total length: 6,100 mm, overall weight: 34,000 kg, Equipment: CE marking, documentation/manual, Hydraulic press brake Manufacturer: EHT - Trumpf, Type: TruBend 8400-50S Year of manufacture: 2010 Technical data Manufacturer: EHT / Trumpf Type: TruBend 8400-50S Year of manufacture: 2010 Capacity: 400 t Bending length: 5050 mm Distance between uprights: 4050 mm Throat depth: 405 mm Stroke of Y-axis: 400 mm Installation height: 720 mm Table width: 140 mm Motor power: 37 kW Oil capacity: 600 L Pneumatic connection: 6 +/- 1 bar Dimensions: approx. L 6.1 x W 2.8 x H 3.67 m Weight: approx. 34 t Equipment • Controlled axes: X, R, Y1, Y2, Z1, Z2 • Control system: Cybelec ModEva 10S, 2D – graphic control • Upper tool clamping system Trumpf/Wila, hydraulic • Lower tool clamping system Trumpf, hydraulic • CNC-controlled crowning • Safety light curtain Lazersafe • 2 pcs. CNC bending aids incl. parking position Dedpfezd Tf Sjx Anzjkr • Pneumatic die shifting • Foot switch • Very large tool package, as shown in the photos • LCB angle measuring system (2 x front, 2 x rear) All information without guarantee.

Condition: excellent (used), MAZAK INTEGREX 400-3S is a CNC Turning-Milling-Drilling Center designed for precision, high accuracy and reliability. Capacities: distance between centres 1500 mm, swing 760 mm, max turning length 1524 mm, bar passage 102/77 mm, tool magazine 40 stations (Ø max 90 mm, L 400 mm). Main specs: main spindle A2-8 stepless 35–3300 t/min 30 kW 1200 Nm; back spindle A2-8 35–4000 t/min 26/22 kW 500 Nm; milling spindle CAPTO C6 15–12000 t/min 18.5 kW 120 Nm. Travels X630 Y±115 Z1585 mm; feeds 0–8000 mm/min; rapid X/Z 38 m/min Y26 m/min; weight ~13300 kg; footprint 5110x2196 mm; height 2798 mm. Equipment: coolant 444 l (15 bar through milling spindle), Forkhardt 3-jaw chucks Ø400/315 mm, linear scale for X, RS232, PCMCIA, spindle sync, chip conveyor, synchronized tapping, foot pedal. Enables tight tolerances; typical applications: automotive, aerospace, medical, machine tools, watchmaking. Djdpfx Aneyxn H Nszokr

Condition: used, Year of construction: 2014, turning diameter 376 mm turning length 760 mm control Fanuc Dksdpsy Sblrefx Anzjr x-axis 260 mm z-axis 830 mm weight of the machine ca. 6000 kg

Condition: new, Year of construction: 2025, functionality: fully functional, stroke length: 310 mm, operating speed: 10 mm/s, reverse speed: 200 mm/s, throat depth: 410 mm, oil tank capacity: 220 l, travel distance X-axis: 750 mm, controller manufacturer: ESA, controller model: S 875W, working width: 4,100 mm, bending force (max.): 220 t, back gauge: 750 mm, distance between stands: 3,600 mm, control type: CNC control, degree of automation: automatic, number of support arms: 2, back gauge adjustment: CNC-controlled, number of axes: 8, type of crowning: CNC-controlled, Hybrid Bending Press MVD 4100 x 220 Tons HC-Series CNC ESA S 875W 21″ *dxf 3D ready 8 axes (Y1-Y2-X-R-Z1-Z2-X5_conical_A1) Automatic WILA crowning table Dsp Laser GIVI MISURE high-precision optical scales UNIMEC back gauge Upper tool clamp: Promecam Rolleri Type H = 150 mm Multi-cavity die, full length Press force: 220 tons Bending length: 4100 mm Distance between uprights: 3600 mm Throat depth: 410 mm Table – ram opening (“light”): 515 mm Working height: 965 mm Y-axis stroke: 310 mm Y-axis descent speed: 200 mm/s Y-axis working speed: 0–10 mm/s Y-axis return speed: 200 mm/s Djdpex N Rxcsfx Anzokr X-axis back gauge stroke: 750 mm Power: 18.5 kW Dimensions (L x W x H): 5600 x 2200 x 3040 mm Approximate weight: 13,700 kg

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 35,295 h, bending force (max.): 230 t, number of axes: 5, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Operating hours [h] 35295 Hydraulic operation [h] 24098 Standard equipment: Machine - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Spherical bearing of the press beam with press beam inclination - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Oil cooler - Control cabinet cooling - Modern machine design Back gauge system - Rear back gauge system with 2 axes and rack and pinion drive for the X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping Dodpfxjza Eiie Anzskr - Upper tool clamping system "New Standard Clamping" manual, hardened, self-centering; for vertical tool change - Lower tool clamping with hydraulic clamping, hardened Lower tool displacement - Lower tool displacement programmable (pneumatic, 2 positions) Control - Machine control: TRUMPF TASC 6000 graphical workshop programming - Windows XPe, Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15" touch screen - Network enabled - Teleservice via analog telephone connection Operation - Control panel with LCD keypad, foot switch for up, down and emergency stop - Communication bus for the use of ACB angle sensor tools Safety - Safety device: integrated side doors + Rear back gauge system 5 axes (X, X1, R, Z1, Z2) + Upper tool clamping hydraulic + Crown control CNC + BendGuard + Additional foot switch + 2 pcs. support console + 1 pcs. MobileControl + ACB prepared

Condition: ready for operation (used), Year of construction: 1998, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1750 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec back stop - adjustable max. 600 mm table width 120 mm work height max. 1050 mm Number of working hours 28.500 h oil volume 200 l operating pressure 340 bar total power requirement 14.0 kVA weight of the machine ca. 9050 kg range L-W-H 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition (!!) with only approx. 28.500 operating hours - in checked condition - machine video - ?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control * swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized adjustment of the stop fingers (Z axes) - CNC pneumatic die displacement (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic Lower tool clamp - 1x freely movable 2-hand / foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging doors) - bending tool storage cabinet (right front, side) - original operating instructions + circuit diagram etc. further technical data: - feed speed X axis .. 500 mm/sec. - feed speed R axis .. 300 mm/sec. - feed speed Z axis .. 1000 mm/sec. Dsdpfxsxaa Uro Anzskr - travel range X axis .. max. 600 mm - travel range R axis .. max. 250 mm

Year of construction: 1993, condition: ready for operation (used), machine/vehicle number: Seriennummer: 9302394, CNC-Control HATASTAR 2000 The press capacity is 500 t or 5000 kN Djdpfed Egc Ajx Anzjkr In addition to the machine tools are available Switch Cabinet left X1- + R-/ X2- + R-Axe on round guide Y1- + Y2-Axe hydraulic Upper tool clamping pneumatic sheet metal trace-device Second tow-hands Operation universal matrice 100x100x5'100 mm knife 280 x 5'100 mm Matrices-central plate, b = 111 mm