DIAMETER 100 MM FAST CUTTING CIRCULAR SAW

GELİŞİM GLS - 100

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also Gujdefg E Hpspfx Ab Usk “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, Year of construction: 2025, CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Machine characteristics CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. The band saw arm is made of massive, uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of structural steel, stainless steel and tools. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. It has a huge impact on the band guiding, its durability, accuracy and cutting quality. The carbide guiding drastically reduces the wear of both the machine and the blade. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a double-sided swivel arm and a control panel. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 44 and 88 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Ø max 260 mm /perpendicular cutting Gujdpfxoi D Dgws Ab Uek H×B max 320×160 mm /perpendicular cutting Power supply - 3–phase, 400V Total power - 2.1 kW Arm lowering control - hydraulic cylinder Band dimensions - 2740×27×0.9 mm Cutting speed - stepless 0–50 m/min Band speed - 44 / 88 m/min Vice base height - 920 mm Dimensions - 1400×880×1550 mm Weight - 330 kg Cutting parameters Angle 0º ---- ø260 320×160 255×255 45º R ø210 210×200 210×210 60º R ø135 135×130 130×130 45º L ø160 220×130 160×160 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Gsdpfx Abjd N H A Ne Uouk Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: new, Year of construction: 2025, saw band length: 3,920 mm, saw band width: 34 mm, Double column bandsaw fully automatic Everising H-260 HB Cutting range round: 0 - 260mm Cutting range square: 300 x 260mm Bundle tension: Width: 145 - 190mm Bundle tension height: 30 - 130mm Drive power: 3.7 kW Saw blade dimensions: 3920 x 34 x 1.1mm Weight: 1759 KG Machine dimensions: 2170 x 2100mm The standard equipment of the machines is as follows: Solid steel construction in double column principle - NC feed system - Frequency-controlled cutting speed (infinitely variable, inverter-controlled) - Digital cutting speed display - Hydraulically controlled double horizontal clamping vices - Hydraulic saw band tensioning - Saw band guides (incl. band back guide) made of carbide - Hydraulically pre-tensioned band guides - Precise PLC control (SPS) for all hydraulic and electrical components. - Cutting counter with automatic switch-off - Automatic out-of-stock switch-off - Multi-job function - Bundle clamping device - Driven chip brush - Automatic belt breakage control incl. emergency stop - Chip flushing gun - Flexible work light - 2 meter roller conveyor Gedpsq Ulxysfx Ab Uouk - Tool box - Carbide function Special equipment included: - Variable clamping pressure reduction - Cutting process control Extensive complete German documentation.

Year of construction: 2013, condition: used, cutting diameter 420 mm saw band length 41 x 5600 mm cutting width 1,3 mm Control Simatic S7 Touch band speed 17 - 110 m/min sawing motor 7,5 kW diameter of round bars 420 x 3000 mm diameter of round bars 300 x 6000 mm total power requirement 30 kW Guodpfx Asd Izmasb Usk weight of the machine ca. 18,5 t dimensions of the machine ca. 12,5 x 5,0 x 2,5 m CNC sawing machine with band saw JAESPA Compact 4S and round steel magazine and discharge gripper for sawing round bars from 50 - 420 mm and 6 pockets with a max. bar weight per pocket of 3400 kg. Cut-off lengths 20 - 1000 mm. As good as new condition, approx. 1,000 working hours.

Condition: used, Steel construction for crane system Width: approx. 8,5 m Length: approx. 7,95 m Plant dismantled The plant is sold "as is". Guedpfx Absbruzgs Uok Viewing: You are cordially invited to view the item - simply contact us and arrange an appointment at short notice. Attention: no guarantee, no exchange, no return possible.

Condition: used, Year of construction: 2019, turning diameter 400 mm turning length 584 mm greates pass round over bed 750 mm control Siemens 828 D Shop Turn spindle passage 81 mm spindle speed: 3500 U/min spindle motor 18,5/22 kW max. torque on the spindle 410 Nm no. of tools in turret 1 12 BMT 65 driven stations 12 BMT 65 speed of driven tools 5000 U/min drive milling spindle MK 5 kW y-axis +/- 60 mm rapid traverse 30/30/10 m/min tail stock MK 5 range L-W-H 4,6 x 1,9 x 2,1 mm weight of the machine ca. 6,65 t CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck Kitagawa Ø 250 mm Gjdpfjww Nazox Ab Ujuk - Chip conveyor - partscatcher with box into door - signal lamp - 2 +2 driven toolholder - some fixed toolholder - boxway system - tool measuring - programmable tailstock - coolant 23 bar - bigger coolant tank 225 ltr. - double cartridge filter - coolant gun - two steps coolant pressure

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 Guedpfx Aotv H Ucsb Uok voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault in the electrical system.

Condition: refurbished (used), functionality: fully functional, saw blade diameter: 360 mm, cutting height (max.): 100 mm, cutting range round steel at 90°: 100 mm, section length (min.): 300 mm, Fully automatic carbide circular saw machine type KMR 100 AP Refurbished to mint condition - available ex stock Working range: Round material 20 - 100 mm Square material 20 - 80 mm DRIVE PERFORMANCE Frequency-controlled saw motor 11.0 kW cuting speeds 20 - 150 m/min incl. Infeed magazine and sorting for trim cuts/rest pieces and good parts Gsdpfx Absh Uqpvo Usuk Suitable for cut off length up to 300 mm Cutting time for Ø 100 mm solid material 1.0037 approx. 7 seconds !!

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm band speed 15 - 115 m/min total power requirement 5,5 kW weight of the machine ca. 2,8 t dimensions 3,2 x 2,2 x 2,7 m Automatic electromechanical band saw machine in two-column design for 0° Cuts on solid material and profiles made of steel, stainless steel and Gedpfx Asfm T Hbjb Uouk Steel alloys up to a maximum of 350x350 mm. The standard equipment includes: Powered chip conveyor, to be mounted on the right or left of the machine. Clamping pressure regulation of the vices. Feeder with vertical rollers for lateral material support. Sensors for initial material detection. Clamping pressure regulation. 300 programs can be saved. The machine is available with a 34 or 41 band - at no extra charge. Price on request.