Bolster plate

GERD WOLFF 2000 x 1000 x 600mm

Condition: new, Year of construction: 2025, overall weight: 1,800 kg, total height: 600 mm, total length: 2,000 mm, total width: 1,000 mm, plate height: 600 mm, groove spacing: 140 mm, GERD WOLFF Clamping cube 2000 x 1000 x 600 mm If you cannot find the size you require, simply send us an email with the completed PDF form. This will enable us to offer you a customised plate tailored to your requirements. Phsdpfjxbpihjx Ah Uja T-slots – size: 38 x 22 T-slot spacing: 140 Number of slots: 10 Edge distance: 80 Weight: 1800 kg Cast iron quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/III Clamping cube, cubic clamping table, multi-sided clamping, angle clamping cube, precision cube, CNC clamping cube, clamping angle, machine cube, 90-degree clamping device, drill hole cube, modular clamping cubes, workpiece positioning, assembly cube, fixing cube, clamping block

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with Phsdpfofg E Hpjx Ah Uoa lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: ready for operation (used), Year of construction: 2017, Main Drive Number of axis 5 Control Unit Brand HEIDENHAIN Model TNC 640 This 5-axis DMG MORI DMU 75 monoblock was manufactured in 2017. It features a Heidenhain TNC 640 3D control, a production package with a 40 bar/23 l/min, 600 l tank, and a Blum laser for in-workspace tool measurement. Ideal for complex machining tasks, this vertical machining center represents a significant asset for precision engineering. Contact us for more information about this machine. Application Types Pedpfx Ahjx D Dkfe Uoha Milling

Condition: good (used), Year of construction: 2020, machine/vehicle number: 164390-0000-Z2724, Offer 24059 Technical data: - Jaw design stepped jaws - Jaw width 125 mm - Jaw height 40 mm - Clamping width 1 0 - 216 mm - Clamping width 2 97 - 312 mm - Clamping force 40 kN Pjdpfx Ajrwmkash Ujha - Total height 140 mm - Weight 33 kg - Min. Space requirement L 463 x W 126 x H 145 mm

Condition: used, different types available Phjdpjdc A Sbsfx Ah Uoa

Condition: used, Year of construction: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm Podpfju U Sabsx Ah Usha total power requirement 2,6 kW weight of the machine ca. 1,5t t

Condition: used, Year of construction: 2017, Absolutely as good as new Consists of 1 measuring case 12-20mm Consists of 1 measuring case 20-50mm Psdpfjvvxvdex Ah Ueha Consists of 1 measuring case 50-100mm

Condition: excellent (used), Swing over bed 1000 mm Distance between centers 2000 mm Center height 500 mm Swing over slide 700 mm Spindle bore 128 mm Pjdpfswhkdcsx Ah Usha Spindle speeds 6.4-1'600 rpm SIEMENS 810 D control Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2017, Universal Machining Center Machine type: DMG DMF 260 / 11 linear Control: CELOS Siemens 840D sl Operate Year of manufacture: 2017 TECHNICAL DATA: Travel distances: X-axis: [mm] 2,600 Y-axis: [mm] 1,100 Pjdsx Dr Urepfx Ah Usha Z-axis: [mm] 900 B-axis C-axis Number of controlled axes: 5 Rapid traverse (X/Y/Z) [m/min]: 80 / 60 / 60 Spindle speed range [rpm]: 20 - 15,000 Options: - Main spindle: 15,000 rpm, 46/30kW, SK40 - Dynamic package rapid traverse x-y-z: 80/60/60m/min - X-axis linear motor - Separate electronic handwheel - 60-position chain magazine - Bed flushing via M-function - High-pressure coolant pump 40 bar - 600L coolant tank with paper band filter - Rotary table integrated into table - B-axis in head - Automatic door - Coolant gun - Spindle probe - 2 pcs. Roto clear - Scraper belt chip conveyor This offer is non-binding and subject to prior sale. Changes, errors, and interim sale expressly reserved.

Condition: excellent (used), Year of construction: 2010, Control: Siemens Sinumerik 840D Work Area Swing diameter over bed: 820 mm Swing diameter over cross slide: 520 mm Cross slide travel: 600 mm Tool Holder: Front: Capto size C6 – Multifix D1 Rear: Boring block with clamping claw Centre Distance: 3,000 mm Main Spindle Drive Power digital AC motor – 60% duty cycle: 46 kW Number of gear stages: 2 (ZF planetary gearbox, electrically shifted, mounted outside the headstock) Headstock Spindle nose DIN 55027 / Bore (standard): 11 / Ø 132 mm Spindle diameter in front bearing: 190 mm Speed range (constant V): 1 – 1800 rpm Standard chuck sizes: Ø 315, Ø 400, Ø 500 mm Spindle nose DIN 55026 / Bore (option): A 11 / Ø 164 mm Spindle diameter in front bearing: 210 mm Speed range (constant V): 1–1600 rpm Cross Slide Transverse feed range: 0.001 – 1000 mm/min Longitudinal feed range: 0.001 – 2000 mm/min Thread pitches: 0.01–999.999 mm Rapid traverse transverse/longitudinal: 5/10 m/min At centre distance: 4,000 mm Phsdpexgdfbofx Ah Uoa Transverse feed force: 16,000 N Longitudinal feed force: 22,000 N Turning tool section: 40 x 40 mm² Tailstock Quill diameter: 125 mm Quill travel: 280 mm Taper: 6 Mk Electrical Equipment Three-phase: 400 V, 50 Hz Design in accordance with VDE and EMC guidelines EN50081-2 / EN 50082-2 Interference suppression level A according to EN 50081-2 For TN-S or TN-C networks / industrial networks without RCD protection Dimensions Machine (L × W × H) = 2.88 m + centre distance × 2.55 m × 2.32 m Machine Weight (Centre distance / weight approx. kg) 3000 mm: 10,900 kg