GRS 252-A 10.67

GETECHA

Year of construction: 2015, condition: good (used), functionality: fully functional, Getecha cutting mill for plastic parts Type: RS 165-A1.5 Pgjdez Epgrjpfx Aazet The cutting mill was used only rarely. It is in used condition visually, but in very good technical condition. The pictures show some minor surface rust in the grinding chamber. This will wear off during the first use. Serial number: 18711 Year of manufacture: 03/15 Wiring diagram no.: ES18711 Connection: 3 × 400 V / N / PE Frequency: 50 Hz Connected load: 2.5 kVA

Year of construction: 2006, condition: good (used), 5-axis vertical machining center fully equipped with direct-drive technology. Pjdspkyn Rspfx Aazsgt Machine equipped with 30,000 rpm spindle, 60-place tool magazine and Heidenhain TNC 530 CNC

Year of construction: 1999, condition: excellent (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades -Manufacturer: Getecha, Side-mounted mill cutting mill -Type: GRS182-A1.50 Pjdpfxozrfbno Aazsgt -Funnel opening: 310 x 290 mm -Sieve perforation: Ø 6 mm -Dimensions: 720/700/H1220 mm -Weight: 210 kg

Condition: used, power: 160 kW (217.54 HP), GETECHA RS 8012 Granulator Accessories: with used control cabinet Pgsdpjzy Hlqefx Aazot Drive: 160.0 kW Rotor blades: 7x2 Stator blades: 4 Rotor diameter: 800 mm Rotor width: 1200 mm Feed opening: 1200 x 950 mm

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,905 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 2,221 bar, opening stroke: 335 mm, total length: 2,420 mm, total width: 1,700 mm, total height: 3,100 mm, overall weight: 6,700 kg, Equipment: documentation/manual, For sale: Well-maintained injection moulding machine ENGEL INSERT 200V/60 with only 23,905 operating hours. The machine was used exclusively for sampling purposes. Inspection under power possible at any time! Technical specifications as per the pictures! Machine is immediately available! Pgsdpfoy Iwlajx Aazjt

Condition: used, power: 160 kW (217.54 HP), GETECHA RS 8012 Granulator Pgodpfjzy Hc Aex Aazot Accessories: with used control cabinet Drive: 160.0 kW Rotor blades: 7x2 Stator blades: 4 Rotor diameter: 800 mm Rotor width: 1200 mm Feed opening: 1200 x 950 mm

Year of construction: 1995, condition: used, functionality: fully functional, GETECHA RS 303‑A 60.11 plastic shredder, granulator 11 kW GETECHA RS 303‑A 60.11 type central plastic shredder, granulator with built-in exhaust fan. Manufacturer: GETECHA Pedpoyf E N Tjfx Aazsgt Type: RS 303‑A 60.11 Date of manufacture: 1995.12 Rotor cutting circle diameter: 340 mm​ Cutting width: 300 mm​ Number of rotating knives: 3 pcs Number of fixed knives: 2 pcs​ Cutting chamber opening: 300x440 mm Main motor power: 11 kW​ Speed: cca 300-400 1/min​ Screen opening (standard): 6–8 mm, round​ Average capacity: 200–360 kg/h Feeding height: 1750 mm Overall dimensions (WxLxH): 1500x2000x2170 mm Built-in exhaust fan: Manufacturer: Elektror Karl W. Müller GmbH & Co. Voltage: 230/400 V, 50 Hz, three-phase.​ Power: 3.1 kW​ Speed: 2830 rpm Volume flow: 2760 m³/h

Condition: used, Year of construction: 2003, CNC machining center, universal Manufacturer: AXA Type: VPC 40 U Year of manufacture: 2003 CNC control: Heidenhain TNC 430 Travel distances: X/Y/Z = 2,300 x 1,200 x 600 mm NC rotary table dimensions: 1,100 x 1,100 mm Fixed table dimensions: 1,100 x 1,100 mm Tool holder: SK40 Tool magazine: 60 positions Spindle speed: 10,000 rpm Weight: approx. 20 tons. Pgodewwt Nmopfx Aazst 28926ä

Year of construction: 2005, condition: excellent (used), functionality: fully functional, machine/vehicle number: 14764, Key operating data Motor power (standard): 5.5 kW Cutting diameter of the rotor: 300 mm Rotor width / cutting length: 125 mm Rotor speed: 230 rpm (slow-speed system for noise and dust reduction) Average output (throughput): 80 kg/h (depending on the type of plastic and the mesh size of the screen) Power supply: 3 x 400 V + N, 50 Hz Cutting system and working chamber Opening of the shredding chamber: 450 x 335 mm Opening of the feed hopper: 490 x 420 mm Number of rotating knives (on the rotor): 10 Number of fixed knives (on the stator): 2 Pgjdpoztplgefx Aazjt Cutting geometry: Shear cutting with a slanted rotor, which facilitates the handling of three-dimensional parts Standard screen: Mesh size 6 mm (round, interchangeable) Particle size of the recovered regranulate: Standard 4–8 mm (depending on the installed screen) External dimensions and weight Machine length: 1100 mm Machine width: 900 mm Machine height: 2100 mm (for the version with a high stand frame for dust extraction) Total weight: 500 kg Additionally: new replacement knives, three screens with 5, 6 and 8 mm Cross magnet in the feed hopper!

Condition: used, machine/vehicle number: 11058, 3-blade rotor 8 rotor blades (staggered) Pjdpfx Aasyr Th Dozsgt 2 rows of stator blades Rotor diameter: 200 mm Rotor speed: approx. 900 rpm Working width: 880 mm Inlet cross-section: approx. 130 x 845 mm

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining center with SIEMENS 840 D, dual pallet changer, internal coolant system, linear guides, and 30-tool automatic tool changer. Table size: 2 x 1000 x 450 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1100 mm Y-axis: 500 mm Z-axis: 640 mm Spindle speed range: 50 – 10,000 rpm Table load: 600 kg Feed rate range, X/Y/Z, stepless: -10,000 mm/min Rapid traverse in all axes: 30 m/min Drive power: 18.5 kW Machine dimensions L x W x H: approx. 3605 x 3041 x 3220 mm Weight: approx. 6700 kg Accessories / Special features: • CNC control system SIEMENS 840 D • Dual pallet changer • 30-tool automatic tool changer • Full enclosure with safety doors, electrically secured • High spindle speed up to 10,000 rpm and drive power of 18.5 kW • Linear guides with double roller recirculating bearing, allowing high torques to be absorbed evenly in all directions • Ball screws in all 3 axes • The entire machine bed is made of Meehanite cast iron, ensuring precision, rigidity, and vibration damping • Tool holder DIN 69871, ISO 40 • Chip conveyor with integrated coolant system Poded I R E Nspfx Aazjgt • 4th axis pre-configured • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, machine/vehicle number: 11629, Rotor diameter: 450 mm Rotor width: 800 mm 5 x 5 blade rotor (offset) Pgjdpfx Ajyr Tlvsazst 2 rows of stator blades Inlet cross-section approx. 600 x 800 mm Drive motor 55 kW With soundproof box, mobile

Condition: used, machine/vehicle number: 5257, Inlet: 800 x 200 mm Pjdpfxjyr I E Re Aazjgt Rotor diameter: 200 mm Width: 880 mm Rotor blades: 3 Stator blades: 2 Drive: 5.5 kW

Condition: like new (used), All parts are for sale, complet. Pgsdehi Tvbspfx Aazet

Condition: used, machine/vehicle number: 11550, Rotor diameter: 300 mm Rotor width: 140 mm 10 rotor knives 2 rows of stator knives Cross section approx. 250 x 300 mm Drive: 5.5 kW Pjdpfx Aaoyr Tk Sozegt