Motorized bar turning machine

GLASER GDM 3-0 + GBR 666

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg Lajdpjnzpx Refx Aiwjb

Year of construction: 2026, condition: new, IWR 2000D - The fruit washer with mill for fruits and vegetables is made entirely of high-quality stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water and, after pre-washing, transported via the conveyor belt where they are thoroughly cleaned with fresh water. Afterwards, the cleaned fruits enter the mill, where they are processed to the desired mash consistency using the selected sieve. The washing system is also equipped with a dosing attachment for pack presses. Technical Information • Nominal capacity: 1500 kg/h • Power requirement: 3 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Washing tank water capacity: 120 L per batch • Water consumption: 12 L/min • Water connection: 3/4” quick coupling • Electric control cabinet with IP65 protection rating Laedpfxjtu Ikce Aiwjb • Swiveling Rätz mill • Equipped with rollable wheels • Easy to clean • Through the frequency converter, the conveyor capacity can be easily adjusted Dimensions: Length: 3250 mm Width: 840 mm Height: 2270 mm Weight: 160 kg

Year of construction: 1979, condition: used, throat: 22/29 mm Ledpfx Ajzif Seiwoab drive motor: bei 380 V ca. 0,55 kW space needed: 450 x 500 x 560 mm weight: ca. 6,5 kg pressure power: 30 kN

Condition: used, functionality: fully functional, overall weight: 310 kg, Weight: 310 kg Dimensions: 900x700x1550(h) mm Ledpfx Ajx I Rdisiwjab Motor power: 3 kW Solid square: 20x20 mm Solid round: 20 mm diameter Handrail: 60x12 mm

Condition: excellent (used), control: Heidenhain Positip 850; tool taper: SK 40; hydr. clamping; stroke: 100 mm; table: 800x480 mm travel: x-600 mm, y-400 mm, z-400 mm rapid motion feed: 63-800 mm/min (18 steps) Laedpfolkgvbjx Aiwob spindle speed: 63-3150 rpm (18 steps) accessories: coolant equipment, collet chuck incl chucks

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 Lasdoh Hvk Aepfx Aiwob spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Year of construction: 2020, condition: new, Transport systems Ledpefz U S Eofx Aiwsab Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 50 h, functionality: fully functional, A welding robot system is for sale with the following contents: Elite Robot CS620 (1750mm range) with programming flange and software Fronius TPSi 500 Laedpfsv Dvllsx Aiweb Positioner rotateZERO 500 with 1800mm x 800mm intermediate frame Machine frame System is ready for welding immediately

Condition: new, functionality: fully functional, power: 10.2 kW (13.87 HP), fuel type: diesel, fuel tank capacity: 15 l, color: red, overall weight: 1,500 kg, empty load weight: 1,450 kg, operation weight: 1,500 kg, lifting height: 2,740 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2025, operating hours: 1 h, Equipment: additional headlights, adjustable chassis, cabin, parking heater, rubber tracks, OFFER!! €15,000 net!! Special offer: Only €15,000 net – including 3-year warranty, comprehensive spare parts supply, warranty & post-warranty service, and dedicated customer support. KINGWAY DEUTSCHLAND e. K. is the main dealer for the Kingway brand in Germany. We serve the entire German market and all neighboring countries, delivering machines to any destination worldwide. If you need a transport quote, have questions about our machines, or are interested in establishing a dealer network in your country, contact us! We offer a huge range of machines and sell over 3,000 units annually. If you are interested in additional models, please visit our website where you are sure to find the right machine for your needs. MINI EXCAVATOR YAMA S15K - KUBOTA TECHNICAL DATA: Machine weight: 1,500 kg Bucket volume (3 buckets included): 0.03 m³ Engine model: KUBOTA Engine power: 18.4 kW / 25 hp Number of cylinders: 3 Oil cooler: Yes Swing arm: Yes Extendable tracks: Yes Maximum climbing ability: 35º Pump type: Gear pump Pressure: 16 MPa Hydraulic oil flow: 25 l/min Maximum speed: 2 km/h Platform rotation speed: 9-10 rpm Digging force: 13 kN Ground pressure: 30 kPa Fuel tank capacity: 15 L DIMENSIONS: Length: 2,550 mm Width: 1,100 mm Height: 2,310 mm Bucket width: 1,160 mm Bucket height: 210 mm Track width: 920 mm Track shoe width: 230 mm Ground clearance: 380 mm Standard bucket width: 380 mm Total track length: 1,300 mm Lasdpfx Aov Av Ideiwsb WORKING RANGE: Maximum digging height: 2,740 mm Maximum dumping height: 1,750 mm Maximum digging depth: 1,800 mm Maximum vertical digging depth: 1,320 mm Maximum digging radius: 2,400 mm Minimum swing radius: 1,550 mm Maximum dig radius at ground level: 3,227 mm Maximum height of raised dozer blade: 325 mm Maximum depth of lowered dozer blade: 175 mm PRICE: €13,500 net €16,065 gross - INCLUDES 3 digger buckets (200, 400, 800) - For machines regularly serviced by us, we EXTEND THE WARRANTY to TWO YEARS - 12 MONTHS FREE WARRANTY - after this period, all original spare parts available on demand! - FREE delivery within a 200 km radius - VAT-free sale possible (with valid VAT ID) - FINANCING available - We are always at your service! - We have our own mobile and stationary service teams, available for all our customers at any time.

Condition: excellent (used), Year of construction: 2019, Cell with FANUC Arc Mate 100iD welding robot Year of production: 2019 Axes: 6 Reach: 1441 mm Load: 12 kg Lodpfx Aet Rwwreiwoab Fanuc System R-30iB Plus robot controller and 2 m x 2 m x 2.7 m housing (without Kemper extraction system)