Hydr. pressbrake

HACO PPM 30.200

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, sheet thickness (max.): 60 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), Equipment: cone bending device, documentation/manual, 4 roll plate bender HAEUSLER - VRM-hy MACH-ID 9638 Make: HAEUSLER Type: VRM-hy Year: 1998 Smallest bending diameter 640 mm Pressing force against upper roll 5800 kN Conical bending attachment Central lubrication Equipped for change rolls 570 / 500 / 430 mm Rolling width: 3100mm Rolling thickness 3x toproll Ø:50mm Rolling thickness 5x toproll Ø:60mm Fjdpezbqquofx Al Ssgh Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Side roll Ø: 420mm Number of rolls: 4 Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Number of driven rolls: 2 Power: 81kW Length: 8700mm Width: 2900mm Height: 3075mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2015, 20 Ft. Shipping container equipped with screw compressor installation with 2 Ingersoll Rand R30I-A10 screw compressors of 30 kW each. Fgsdpfjwbf U Nex Al Sjh

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 320 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, turning length: 3,000 mm, Lathe in very good technical condition, has seen very little use and was not used for machining pipes. The Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe. This model fulfills all the specific criteria for machines intended for the Oil & Gas sector: • Massive spindle bore (Big Bore): This version features a spindle bore with a diameter of 320 mm (approx. 12.5 inches), allowing for easy insertion of thick-walled drill and casing pipes. • Dual chucking system: The headstock is designed for mounting two independent lathe chucks (front and rear, typically 28 inches in diameter), ensuring the pipe is clamped and stabilized at both ends of the spindle. • Optimal working dimensions: The 3m designation defines a turning length between centers of 3000 mm, which, combined with a swing over bed of 930 mm (hence the "90" in the name), allows for machining heavy-duty pipeline components. • Exceptional rigidity: FUM POREBA factory machines are renowned for their monolithic, very wide and heavy cast iron beds, which effectively dampen the immense vibrations generated during taper thread cutting. In international used machinery catalogues, this specific Poręba model is directly classified under the Oil Field Lathes category. TECHNICAL SPECIFICATIONS: Geometric parameters and machining ranges • Swing over bed: 930 mm / 36.6 in • Swing over cross slide: 630 mm / 24.8 in • Swing in gap: 1200 mm / 47.2 in • Maximum turning length between centers: 3000 mm / 120 in • Bed width: 585 mm / 23.0 in Headstock • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6 in (in US nomenclature classified as a 12.5" version) • Spindle speed range: 5 – 250 rpm, or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and thread cutting system • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock Fsdpoy Sf Azefx Al Sogh • Tailstock quill diameter: 130 mm / 5.1 in • Tailstock quill travel: 300 mm / 11.8 in • Internal taper of quill: Morse No. 6 (MT6) Drive and dimensions • Main motor power: 22 kW / 29.5 HP • Overall length: approx. 5500 mm / 216.5 in • Overall width: approx. 1750 mm / 68.9 in • Overall height: approx. 1500 mm / 59.0 in • Total weight: approx. 8000 kg / 17,630 lbs

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Fedpeydpxvofx Al Ssgh Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: excellent (used), Year of construction: 2010, operating hours: 75,000 h, functionality: fully functional, 55 kW compressor with built-in dryer and frequency inverter. Very good condition. After service. 3 months warranty. Fjdpfsv Rmmmsx Al Segh

Condition: good (used), Year of construction: 1992, machine/vehicle number: 19703, Offer 22584 Technical data: Fgodsp H Tu Eepfx Al Ssh - Welding current 320 A 60% ED - 270 A 100% ED - Welding current adjustable in 42 steps 40 A - 320 A - Digital volt + ampere display - Separate wire feed case with hose package approx. 1 lfm - intermediate package machine - wire feed case approx. 1,5 m - 4 roller wire feed steplessly adjustable - 2 stroke - 4 stroke - regulation - Spot welding - welding length / welding time adjustment - wire back firing adjustment - ground cable - pressure reducer - connection 400 V / 32 A / 18 kVA - Space requirement approx. W 550 x H 1200 x D 1100 mm - Weight approx. 300 kg

Condition: used, WEBSTER & BENNETT EV 36” HIGH SPEED VERTICAL BORER MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL EV 36” TABLE DIA 915 mm SWING 1168 mm HEIGHT UNDER RAIL 533 - 1016 mm SPEED 13.5 - 300 rpm FEED RATE 0.005-0.250 inch/min MAIN SPEED 40 HP PLUS HIGH SPEED TAABLE EV SERIES MACHINE ELEVATING RAIL SAFETY GAURDING SET OF JAWS FULLY FUNCTIONAL GOOD SLIDES Fjdoxp Na Njpfx Al Sogh

Condition: good (used), functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 16 mm, back gauge: 1,000 mm, cutting length (max.): 3,150 mm, foot switch Fsdpjv Syyvjfx Al Sogh motorized arrester behind cutting angle adjustment Technische Daten / technical details: Schnittleistung / max. cutting capacity 16 mm max. Schnittlänge / max. cutting length 3150 mm Anschlag / limit stop 1000 mm Gewicht der Maschine / weight 16300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, turning diameter over bed 435 mm turning diameter over slide rest . mm turning length 750 mm - Accessories available. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Fsdpfxeyqvgme Al Sjgh apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, pressure 50 t chamfer lenght 1500 mm distance between columns 1220 mm Control Cybelec DNC 1200 closing speed 95 mm/min working feed 1-10 mm/sec Fodora Rrhopfx Al Sjgh work stroke 156 mm overrun time 59 ms tracking travel 6 mm throat 200 mm distance table - lower edge of ram 301 mm table width 160 mm table height 850 mm x-axis 550 mm travel R-axis +/- 50 Number of axles 3 (Y, X, R) St. weight ca. 3600 kg a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200