Guillotine HACO - TSX 3012

Haco TSX 3012

Condition: used, Cutting length: 3100 mm Bwjdpfx Alexuh Ipo Aou Steel cutting capacity: 12 mm Backgauge: 1000 mm

Condition: good (used), functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 16 mm, back gauge: 1,000 mm, cutting length (max.): 3,150 mm, foot switch motorized arrester behind cutting angle adjustment Bwjdpfx Ajv Syyvel Aou Technische Daten / technical details: Schnittleistung / max. cutting capacity 16 mm max. Schnittlänge / max. cutting length 3150 mm Anschlag / limit stop 1000 mm Gewicht der Maschine / weight 16300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 1999, sheet width 3200 mm plate thickness 4.0 mm ST distance between columns 3300 mm upper clamping bar adjustment 400 mm Adjustment folding beam 80.0 mm pivoting angle 180 Grad clamping capacity max. 200 KN rear stop 10.0 - 1600 mm oil volume 160 Liter total power requirement 9.8 kW Bwedjxaa A Nopfx Al Aeu weight 8500 kg range L-W-H ~ 4900 x 2000 x 2300 mm from a maintenance workshop good / well-maintained condition (!!) - inspected condition - machine video - ?v=RY-amZooeX4 Equipment: - robust CNC folding machine - CNC control unit - CYBELEC "DNC 80 PP" * swiveling control panel, front right * 2D graphic display for visualization and multi-simulation * 2D graphic programming * easy operation - CNC motorized backgauge * travel range 10.0 - 1,600 mm * pneumatic / retractable gauge fingers * adjustment speed max. 250 mm/sec. * rear sheet support table with brushes - motorized lower beam adjustment (S-axis) - electro-hydraulic folding movement of the lower beam - pneumatic upper tool clamping - pneumatic lower tool clamping - 1x mobile dual foot pedal - original operating manual + electrical/hydraulic schematics Special accessories included: - 1x segmented set of goat-foot upper tools, H = 150 mm - 1x segmented set of goat-foot upper tools, H = 200 mm - 1x standard sharp-nosed rail (installed) - 1x segmented set of bending/lower tools (installed) - rear sheet support with brushes

Condition: used, functionality: fully functional, Year of construction: 1995, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 14 mm, Equipment: safety light barrier, Hydraulic Shear Brand: Casanova Model: VC-26 Year: 1995 Power: 30KW New WEINTEK control installed in 2020. Cutting length: 3100mm Maximum cutting thickness (steel): 20mm Maximum cutting thickness (stainless): 14mm Throat: 500mm Bwjdpfswy Nhqsx Al Asu Cuts per minute: 8-18 Backgauge: 1,000mm Manual blade gap adjustment via side levers. Front safety laser.

Condition: like new (used), Year of construction: 1998, Technical Data: 2 hydraulically adjustable rollers Bwjdpfxey Rxuzs Al Asu 3 driven rollers Display with digital readout Bending moment: 110 cm/3 Shaft diameter: 180 mm Roller diameter: 460 mm Main motor power: 15 kW Dimensions (L x W x H): approx. 2400 x 2000 x 1600 mm Weight: approx. 7.8 t Accessories: Various tools Condition: Very good, almost as new The seller assumes no liability for typing or data transmission errors. The machine complies with its age in terms of appearance, technology, and wear; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2014, actuation type: hydraulic, working width: 3,100 mm, stroke rate (min.): 13 1/min, sheet thickness (max.): 10 mm, table height: 800 mm, back gauge: 1,000 mm, power: 22 kW (29.91 HP), Equipment: CE marking, emergency stop, finger protection, foot remote control, safety light barrier, We hereby offer you a hydraulic swing beam shear of the brand "ERMAKSON", used, in very good condition. Bedpfsxvinmsx Al Aewu Please feel free to contact us for a quote.

Condition: used, Year of construction: 1993, Technical details: sheet width: 3150 mm plate thickness: 13 mm distance between columns: 3670 mm Bwodpfsu Icnfox Al Aeu Knife length: 3150 mm down holder: 18 Stück back gauge: motorisch 1000 height over floor: 850 mm operating hours: 3256 Table dimensions: LxB: 3770 x 500 mm total power requirement: 30 kW weight of the machine ca.: 12,9 t dimensions of machine: 4,4 x 2,8 x 2,4 m Short stroke Continuous run Gap lighting Hydraulic sheet metal lifting device rear light curtain Positionable backgauge *

Condition: used, functionality: fully functional, Year of construction: 1992, operating hours: 18,922 h, control type: CNC control, Hydraulic pivoting bending machine Manufacturer: RAS, Type: 74.30, 3200 x 4mm Technical data Bwodpfx Aljzhm Nfs Aju Manufacturer: RAS Type: 74.30 Year of manufacture: 1992 Usable length: 3200 mm Capacity: 4 mm Operating hours: 18,922 h (read) Stroke: 400 mm Adjustability of the lower die: 80 mm Adjustability of the bending die: 80 mm Bending angle setting: 0 – 180° Bending angle accuracy: +/-0.1 mm Motor power: 7.5 kW Dimensions: approx. L 4.50 x W 1.80 x H 2.55 m Weight: approx. 5.8 t Equipment • Controlled back gauge 10 - 1500 mm • CNC control Multibend 9000, with 13" monitor, renewed • Automatic bending die adjustment • Gooseneck support rail, H = 150 mm, L = 3,200 mm, segmented • Bending rail 15 mm • Top bending rail, height 10 mm, L = 2,500 mm, segmented • Top bending rail, radius 17.5 mm, L = 2,500 mm, divided into 10 x 250 mm All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: used, Technical details: material thickness: 1,0 mm material width: 17,0 mm internal diameter: 30,0 mm external diameter: 78,0 mm Spare part for bench drill BT 2 Patt spring - Return spring - Spiral spring Declaration of conformity according to ISO/IEC 17050-1 Acceptance test certificate 3.1 according to DIN EN 10204 available Bwjdpou N E Evjfx Al Aeu *

Condition: good (used), Year of construction: 2006, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3120 mm down holder 14 Stück cutting angle 1°5 no. of strokes 14 Hub/min control ENC 100 table width 500 mm work height max. 880 mm oil volume 170 ltr. total power requirement 11.0 KW weight 5550 kg range L-W-H 3750 x 1950 x 1650 mm Machine was used for ALU processing no "heavy" sheet metal processing good condition (!) new price ~ 32.000 Euro - in checked conditions - machinevideo - ?v=o2LW7L2r7Xs ----- Swing cut guillotine shear with fixed cutting angle * with DURMA ENC 100 NC control unit * manual cutting gap adjustment from the front Bwjdpfxoycxgmo Al Aju ----- Equipment: - electro-hydraulic guillotine shears "swing cut" - with DURMA "ENC 100 NC" control unit * Backgauge preselection - X axis * Number of pieces (in automatic mode) * Control panel, front left * Retraction from backgauge on/off * Input of target/actual value procedure with button - NC electro-motorized backgauge (X axis) * on recirculating ball screws * Traversing speed 120 mm/sec. - Manual cutting gap adjustment, from the front - hydraulically acting hold-down device - 1x side stop 1,000 mm - 2x front support arms - Ball rollers in the front support table - Light barrier behind the machine (safety device) - 1x free-moving foot switch - Rear sheet metal chute - Operating instructions