Hapfo AP-9000-M hydraulic automatic wood copying, milling and turning machine

HAPFO AP-9000-M

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: HaRo2020, total width: 800 mm, total height: 1,100 mm, total length: 1,200 mm, briquette diameter: 60 mm, overall weight: 300 kg, warranty duration: 12 months, type of input current: AC, input voltage: 400 V, power: 3 kW (4.08 HP), Equipment: emergency stop, Our new HaRo2020 briquetting press, with a capacity of up to 40 kg/h, automatic tongs, and pre-compactor, is manufactured by ourselves. You can only purchase this machine directly from us, as we do not use intermediaries. The briquetting presses are CE-compliant and manufactured according to the latest standards. Since we produce most of the components in-house, we can offer the machine at a particularly competitive price. Price is exclusive of VAT. The new hydraulic unit is equipped with a SILENCE-PUMP, making the machine extremely quiet in operation. Another benefit of the helical gearing in the pump is increased durability. Everything is made in Germany! You are welcome to visit us and test the machine with your own material. When purchasing our briquetting press, you will receive a detailed and comprehensive German (PDF) operating manual for this machine. The input material must have a moisture content below 15%—ideally 10 to 12%—for sawdust and planer shavings. Technical Data – Hydraulic unit: 3.0 kW (connected load) – Power consumption per hour: approx. 1.8–2.0 kWh – Throughput: approx. 15–40 kg/h – Voltage: 400 V – Frequency: 50 Hz – Circuit protection: 16 A plug – Power cable length: 3 m – Hydraulic control with Bosch Rexroth valves – Briquette diameter: 60 mm (length varies according to material) – Motor equipped with motor protection switch and emergency stop—for operator and machine safety, including motor protection – No electronic components prone to failure such as controllers, sensors, or complicated electronics – Pressing without additives – Counter-pressure adapts fully automatically to your material – Thanks to the pre-compactor, bulky shavings are no problem – No adjustments or monitoring of the pressure required – Fully automatic operation Gbedpow A Hvdefx Aayjt Spare parts supply is guaranteed, as we manufacture the machines in small series in our facility in Germany. The large oil tank ensures that the oil will not overheat during continuous operation. Machine dimensions: Length: 1.25 m Width: 0.82 m Height: 1.11 m Feed hopper: Diameter approx. 80 cm x height 60 cm Weight: 300 kg The briquetting press is immediately operational and does not require installation—just plug it in and start working. The machine can be viewed and tested on-site. You are welcome to send us a sample of your material for testing; we find this is the most effective method.

Condition: new, Year of construction: 2023, functionality: fully functional, DN Solutions PUMA 5100MB – NEW, UNUSED MACHINE! Year: 2023 Fanuc Oi-TF 15” control C-axis powered tool 21-inch chuck (535mm) Spindle bore: 166mm 12-position BMT75 turret Gjdpszpw Dpsfx Aaysbt Max. turning diameter: ø 650 mm Max. turning length: 952 mm Prepared for steady rest support Tailstock Tool probe CROMAR chip conveyor 12 tool holders, including 4 powered tool holders (2/2)

Condition: used, Round workpiece grinder Manufacturer: BRUSA & GARBOLI Country of manufacture: Italy Model: LT 130 - BRUSA DI GARBOLI Year: 2023 Technical parameters: min. diameter (with special feed rollers): 10 mm max. diameter 127 mm min. - max. length 680 - 6000 mm sanding belt size 2000 x 120 mm disk motor power 2.2 kw sanding belt motor power 5.5 kw feed motor power 0.25 kw feed speed 1 - 20 m/min weight 760 kg dimensions 160 x 13 5x 170 cm electrical connection 400V / 50Hz Gsdpfx Aasxdivasysbt feed system self-centering feed speed regulation frequency sanding belts 1 set Adjustment tools 1 set Instruction manual 1 set CE certificate of conformity Optional equipment: PLC control unit “Keyence” photocell, control of opening/closing of the grinding belts Outgoing workpiece feed rollers with drive

Condition: used, OMA 600 Automatic wood lathe, with loader Gbjdpfsrfh D Ijx Aayet

Condition: used, Year of construction: 1994, functionality: fully functional, turning diameter: 170 mm, SECOND-HAND COPYING LATHE WITH 4 SPINDLES BACCI TYPE T4MO Gbsdpfjx Rw Iysx Aayot - Max turning diameter 170 mm - Max working length 1000 mm - Longitudinal sanding unit - Nr. 4 spindle - Year 1994

Condition: excellent (used), Griggio wide belt through-feed sander Gjdpfx Asxixxnoayjbt Combination unit with pad, rubber-coated calibration roller. Oscillation with photocell, electric table lifting. Dimensions: length 140 cm, width 100 cm, height 210 cm Machine in very good condition.

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm Gbedpfx Aaoxz Hh Ueyjt 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: used, Injector Inject Star PI 75 Tape width: 61.5cm Machine dimension in cm: Width: 100 Lenght:210 Height: 228 Gjdjh R T Avjpfx Aaysbt Delivery time: 30 working days after advanced payment

Condition: used, Year of construction: 2000, functionality: fully functional, turning diameter: 170 mm, turning length: 1,250 mm, number of spindles: 4, Equipment: cabin, SECOND-HAND COPYING LATHE BACCI T4MO - 4 holders for simultaneaus milling - Total weight 1.500 kg Gbedpfx Ajx Rx D Neayjt - Incl. soundproof cabin and extraction - Sanding belts: 4 - Band height: 180 mm - Contact roller Ø: 80 mm - Max. batten length: 1.250 mm - Milling machines standart power: 11kw

Condition: refurbished (used), Year of construction: 2018, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, feed rate X-axis: 20 m/min, actuation type: electric, total length: 6,200 mm, overall weight: 3,100 kg, Tornado+ – Fully Refurbished / AS NEW Spray devices GS, RS optional, texture finishing possible Joining, gluing, edge banding, flush trimming, radius milling, corner copying AKF, scraper blade R1/R2 with foil function on unit 1 Belt overlay / Synchro-Flex PUR gluing included in the basic equipment Workpiece dimensions: Width, minimum: 70 mm Height, minimum: 8 mm Height, maximum: 60 mm Length, minimum: 150 mm Panel thickness: Max. 60 mm Edge thickness: 0.3 – 15 mm -CM – CombiMelt gluing system Modular design for easy replacement of the pre-melting tanks. Suitable for processing EVA and PUR hot melt adhesives as well as all common cleaning granules. Any type of adhesive can be processed with all working parameters (such as dispensing quantity, pre-melting and working temperatures) via individual work programs. -Individual inverters with full flexibility for individual activation of the individual processing motors via a power bus system. Special feature: Machine with speed package! 20 m/min with corner copying!! Tools and chain plates – NEW Sale of the machine with warranty possible. Gbjdezkk Drspfx Aayjt Inspection and demonstration possible at any time by appointment.