Injection mold thermostat

HB-Therm HB-160U1

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) Lajdjud N Hdepfx Ah Ujk CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Year of construction: 1993, condition: ready for operation (used), A total of six old injection molding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350kN, injection pressure: 1500bar, injection weight: 35g/hp, screw diameter: 22mm, centering bore: 110mm, mold opening stroke: 330mm, control: defective. 2) Arburg 305 ECO 700-230, year of manufacture: 1989, clamping force: 700kN, screw diameter: 40mm, centering bore: 125mm, mold height min./max.: 190mm/420mm, tie bar distance X/Y: 305mm/135mm, mold opening stroke: 250mm, control: defective. 3) Arburg 305-210-700, year of manufacture: 1982, clamping force: 700kN, injection pressure: 1500bar, injection weight: 117g/hp, screw diameter: 35mm, centering bore: 125mm, mould height min./max.: 200mm/400mm, tie bar distance: 305mm. 4) Arburg 221-75-350, year of construction: 1992, clamping force: 350kN, injection pressure: 1500bar, screw diameter: 22mm, centering bore: 110mm, mould height min./max.: 150mm/300mm, tie bar distance: 221mm. 5) Arburg 221-55-250, year of construction: 1991, clamping force: 250kN, injection weight: 32g/hp, screw diameter: 20mm, mold height min./max.: 150mm/300mm, tie bar distance: 320mm. 6) 2K injection molding machine Arburg 221-75-350, year of construction: 1993, clamping force: 350kN, injection pressure: 1500bar, injection weight: 38g/hp, screw diameter: 22mm, mold height min./max.: 150mm/300mm, tie bar distance: 221mm. Including 7-8 Arburg dryers, various injection units, compressor AirComp, mixing unit liquid-silicone with Arburg control and Scheugen plow. Documentation available. An on-site inspection is possible. Lsdpfx Ajvb Hbfeh Usak

Condition: used, Capacity: 24″ x 8″ Serial No: Calibration: Metric c/ w magnet and coolant Power rise and fall to wheelhead Coolant Laodpfx Aowga N Ejh Usk 2 Axis DRO system

Condition: ready for operation (used), empty load weight: 1,300 kg, x als gemotoriseerd Max longitudinal travel X-axe: 815 mm Max cross-travel Y-axe: 400 mm Max travel Z-axe: 420 mm Power on spindle: 2 HP Admission in millinghead: ISO 40 Laodpfx Asxpgfieh Uok Max quill travel Z': 130 mm Spindlespeeds: 57 > 2275 rpm Table size: 1120 x 255 mm

Condition: used, functionality: fully functional, 1 used: Universal Pantograph Engraving Machine • Model: Fridrich Deckel GK 12 • Application: Fine engraving, copy milling, model making • Working area (workpiece): approx. 200 x 350 mm • Copy template area: approx. 320 x 450 mm Laodpfjxa Ap Ejx Ah Uek • Enlargement/Reduction: 1:1.5 to 1:10 • Year of manufacture: unknown • Spindle motor: approx. 250W • Spindle speed: multiple stages, variable • Condition: used, tested, fully functional

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Selling 5 injection molds with THERMOPLAY hot systems (Italy). The molds are manufactured in Romania by the company MATPLAST SA. Products - accessories MDF skirting made of polystyrene and polypropylene. Those interested will be provided with more technical details. Lsdpfx Ajv Dx I Ash Ujak

Condition: ready for operation (used), Manufacturer: Sonny Ultrasonic Lasdpsh Rizzofx Ah Uek Tip: 1300 W / 20 KHz

Condition: used, functionality: fully functional, Opportunity to acquire a good condition 1400 J&S surface grinder. Machine has been purchased from a liquidated company previously. Current pricing on these is between £5,000 - £8,000 +VAT in perfect condition. Lasdswtfngjpfx Ah Usk *Important Note* - This machine looks like it has been wired up to a secondary electrical panel, which is not included in this sale. Viewing recommended so the buyer can see the wiring arrangement. Sold as seen, viewing available on request.

Condition: used, Year of construction: 2008, Heating capacity: 9 kW (option: 12/16 kW) Pump capacity (50 Hz) standard: Magnetically coupled, 0.5 kW, max. 4,5 bar, max. 40 l/min Pump capacity (50 Hz) enhanced: Magnetically coupled, 1 kW, max. 6 bar, max. 60 l/min Speed-controlled pump: Lsdpfx Ajv Efyzeh Uoak 1 kW, max. 9 bar, max. 50 l/min Cooling water connection: G 3/8" Mold connection: G 3/4" Power supply: Standard 3 x 380 - 415 V/50 Hz

Condition: excellent (used), Supply Voltage: 230V Line Current: 5A Laedora Af Ijpfx Ah Ujk Connected Load: 1100VA HF Output Power: 1000 Watts Output Frequency: 35kHZ Welding Power: 800 W/1000 W Application: Machines and systems for the highest welding quality Benefits: Reduced welding times increase productivity Time welding is possible Maximum repeatability