Folding Machine

Hesse+Co GmbH unbekannt

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Godpow Rm Sasfx Aqioka Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: new, functionality: fully functional, Year of construction: 2024, shaft diameter: 50 mm, roller diameter: 155 mm, overall weight: 400 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, Equipment: documentation/manual, emergency stop, Brand: Sahinler Model: PK 35 Year of manufacture: 2024, unused Capacity (kW): 1.5 Voltage: 400 Frequency (Hz): 50 Gkedpfswt Sy Asx Aqiea Dimensions LxWxH (mm): 1000 x 750 x 1400 Weight (kg) approx.: 400 Units in stock: 4 Manufactured in: Turkey Ø Diameter (mm): 50 Comments: Unused machines at competitive prices, multiple units in stock, foot pedal included.

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine Gjdpjv Tpxqjfx Aqieka -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Condition: good (used), Year of construction: 1980, machine/vehicle number: 27-3, Offer 23317 Technical data: Gkodpfsrklfrjx Aqiea - max. working width 2040 mm - max. material thickness at 40 kp / mm² strength 3.5 mm - Bending angle setting electronically preselectable 0 - 135 ° - smallest bending radius 1.25 x sheet thickness - Smallest inner flange height 6 x sheet thickness - Automatic sequence control for a complete work process - Operation via hand or foot switch - largest opening width / stroke of the upper beam 200 mm - Height adjustability - of the bending beam 80 mm - of the lower beam 80 mm - Upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 1.5 kW - Manual backgauge can be operated from the front - Space requirement approx. W 3300 x H 1350 x D 1500 mm - Weight approx. 2600 kg

Condition: new, Year of construction: 2025, Bending machine ZB 70/2 M - with foot pedal - with standard roller set - two driven shafts - mecanical adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - adjusting way: 120 mm Gkjdpfx Aqjt Hwfneija - weight: 400 kg - dimensions: 900x600x1100 mm

Condition: new, Year of construction: 2025, Protec Welding Turntable, 5000 kg load capacity Variable speed control, 0.05 - 0.5 RPM Handheld remote control Height: 600 mm Diameter: 1500 mm Gedpfx Asid Szceqioka Foot pedal remote control available at an additional cost.

Condition: used, Year of construction: 1995, functionality: fully functional, total length: 36,000 mm, Ironing dryer, working width 4,600 mm, length 22,000 mm, of which 10,000 mm with press rollers, separate press cooling field, hot water heating medium, semi-automatic feeding device, type BFT46 and lifting platform, max. veneer length: 4,600 mm, roll width 600 mm, total length: 36,000 mm, 11 fans, PLC control renewed in 2017 A second ironing dryer of a similar design is available. Gsdpfx Aev Hygfjqijka

Condition: used, Year of construction: 2001, saw blade diameter 400 mm miter . Kühlung weight of the machine ca. 1 t number 4 Stück +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Gkodslug Tujpfx Aqija +++++

Condition: new, sheet width 1270 mm plate thickness 2,0 mm distance between columns 1300 mm daylight opening 48 mm Gsdpfx Asupxcgoqiska 135 ° total power requirement Handbetrieben weight of the machine ca. 0,4 t dimensions of the machine ca. 1,6 x 0,9 x 1,2 m Segment-bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm.

Condition: new, Balkaya Profile Ring Bending Machine HBM 80 Technical Specifications: Tool holder, shaft: 80mm Tool: 245mm Working speed: 4.5m/min Motor: 4kw Hydraulics: 30 tons Dimensions L-W-H: 1450x1050x1800 mm Weight: 1400kg 3 driven rollers Hardened standard rollers Gksdpfx Aqoh T Ulneija Hardened and ground tool holder, shaft Mobile control panel Horizontal and vertical working position Digital display Complies with CE standards